• Journal of Elementary Mathematics Education in Korea
• /
• v.22 no.3
• /
• pp.309-330
• /
• 2018

The purpose of this study is to identify possibility of a mathematical problem posing ability by presenting problem posing tasks with different degrees of structure according to the study of Stoyanova and Ellerton(1996). Also, the results of this study suggest the direction of gifted elementary mathematics education to increase mathematical creativity. The research results showed that mathematical problem posing ability is likely to be a factor in identification of gifted students, and suggested directions for problem posing activities in education for mathematically gifted by investigating the characteristics of original problems. Although there are many criteria that distinguish between gifted and ordinary students, it is most desirable to utilize the measurement of fluency through the well-structured problem posing tasks in terms of efficiency, which is consistent with the findings of Jo Seokhee et al. (2007). It is possible to obtain fairly good reliability and validity in the measurement of fluency. On the other hand, the fact that the problem with depth of solving steps of 3 or more is likely to be a unique problem suggests that students should be encouraged to create multi-steps problems when teaching creative problem posing activities for the gifted. This implies that using multi-steps problems is an alternative method to identify gifted elementary students.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.367-375
• /
• 2023

This study developed a new distance metric for vessel trajectories, applicable to marine traffic control services in the Korean coastal waters. The proposed metric is designed through the weighted summation of the traditional Hausdorff distance, which measures the similarity between spatiotemporal data and incorporates the differences in the average Speed Over Ground (SOG) and the variance in Course Over Ground (COG) between two trajectories. To validate the effectiveness of this new metric, a comparative analysis was conducted using the actual Automatic Identification System (AIS) trajectory data, in conjunction with an agglomerative clustering algorithm. Data visualizations were used to confirm that the results of trajectory clustering, with the new metric, reflect geographical distances and the distribution of vessel behavioral characteristics more accurately, than conventional metrics such as the Hausdorff distance and Dynamic Time Warping distance. Quantitatively, based on the Davies-Bouldin index, the clustering results were found to be superior or comparable and demonstrated exceptional efficiency in computational distance calculation.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.22-29
• /
• 2008

The objective of this study is to provide useful information for the establishment of efficient policy implementation strategies of forest road construction policy in South Korea. Data needed for the analysis was collected by a questionnaire survey. For the analysis, policy evaluation model was constructed based on theories of public policy. Evaluation model contains three independent variables (policy initiative factor, policy content, policy environment) and two dependent variables (policy result, policy impact). Since, these variables are unobservable latent variables, observable indicators are needed as proxy measures. LISREL (Linear Structural Relationships) was employed for the analysis since it is a useful measure for analysing linear structural model which consists of structural and measurement equations. It was confirmed that forest road construction is an effective policy mean for the development of rural region and activating forest resources management. The policy outcome, however, was not satisfactory. To improve the effectiveness of forest road construction policy some modification of policy contents are needed such as increased construction budget, allowing more flexibility and participation to the implementation personal and providing technical support.

• Proceedings of the Korean Society of Applied Entomolohy Conference
• /
• 2006.09a
• /
• pp.45-60
• /
• 2006

최근 국제적으로 생물자원의 중요성이 재인식됨에 따라 이들에 대한 체계적이고 안정적인 정보의 구축 및 활용이 국가경쟁력의 척도로 간주할 정도로 중요성이 커지고 있는 실정이다. 또한, 우리나라는 국토의 64%가 산림으로 되어 있어서 다양한 생물종이 서식하는데 매우 적합한 조건을 갖추고 있다. 이에 따라 산림청과 국립수목원은 국가식물자원정보시스템에 이어 곤충정보에 대한 정보화 사업을 2001년부터 추진해오고 있으며 이 결과로 현재 33만여 점에 곤충표본정보가 구축되기에 이르렀다. 현재까지 국내 유수 곤충표본보유기관 22개 기관이 본 사업에 참여하여 다양하고 내실 있는 정보구축이 이루어져 왔으며 이를 통해 명실 공히 국가적인 곤충자원정보망을 갖추게 되었다. 곤충DB의 국가적인 사업이 추진된 지 6년차에 이르는 2006년도에는 정보통신부의 지원을 받아 14개 표본보유기관이 참여하여 곤충표본DB구축을 중점 추진할 계획이다. 2006년도의 목표량은 곤충표본정보 17,000점으로 기존구축자료 이외에 추가가 필요한 표본정보위주로 구축될 예정이다. 또한, 이미 구축된 곤충표본자원의 활용도와 가치를 높이기 위해서는 더욱 다양하고 많은 자료의 표본을 추가하여 DB화를 추진함은 물론 이들 각각의 정보들을 식물정보와 연계하여 분석 가능토록 하고 GIS시스템을 도입하여 명실공히 국가적인 곤충자원정보의 종합관리가 될 수 있도록 추진하고 있다. 본 사업이 충실히 수행될 경우 국가 주요 생물자원 중 하나인 곤충정보의 DB확대 구축을 통한 전체적인 현황파악 및 체계적인 관리가 가능해 질 것이며, 이와 관련하여 정보화적인 측면, 경제적 측면, 사화 문화적 측면에서 다양한 효과가 기대되며 앞으로도 이에 대한 내실 있는 운영을 위해서는 정부차원의 종합적인 지원 및 관리가 요구되는 시점으로 판단된다.pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의 경우, 강우 일수 감소 이전과 연 유출량 변화는 거의

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

A practical calculation algorithm which calculates the relative output factor(ROF) for irregular shaped electron field has been developed and evaluated the accuracy of the algorithm. The algorithm adapted two-source model, which assumes that the electron dose can be express as sum of the primary source component and the scattered component from the shielding block. Original two-source model has been modified in order to make the algorithm simpler and to reduce the number of parameters needed in the calculation, while the calculation error remains within clinical tolerance range. The primary source is assumed to have Gaussian distribution, while the scattered component follows the inverse square law. Depth and angular dependency of the primary and the scattered are ignored ROF can be calculated with three parameters such as, the effective source distance, the variance of primary source, and the scattering power of the block. The coefficients are obtained from the square shaped-block measurements and the algorithm is confirmed from the rectangular or irregular shaped-fields used in the clinic. The results showed less than 1.0 ％ difference between the calculation and measurements for most cases. None of cases which have bigger than 2.1 ％ have been found. By improving the algorithm for the aperture region which shows the largest error, the algorithm could be practically used in the clinic, since one can acquire the 1011 parameter's with minimum measurements(5∼6 measurements per cones) and generates accurate results within the clinically acceptable range.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.237-242
• /
• 1979

The equivalent conductances of sodium, potassium, ammonium, tetramethylammonium, triethylammonium, diethylammonium and ethylammonium iodide, and picrate salts of sodium and potassium in ethylene carbonate have been measured at 40.0 $^{\circ}C. The limiting equivalent conductances of the salts have been computed by Fuoss-Onsager-Skinner equation. The limiting ionic equivalent conductances of $Na^+,\;K^+,\;and\;NH^+$ are in order of $Na^+ which is the reverse order of solvation for the ions in any solution, And the order of limiting ionic equivalent conductances for alkylammonium ions is $(C_2H_5)_4N^+<(C_2H_5)_3NH^+<(CH_3)_4N^+<(C_2H_5)_2NH_2^+<(C_2H_5)NH_3^+$ which coincides with the order of mass transfer. From the dissociation constants of the saltss determinde by Fuoss-Kraus method, it is found that ethyene carbonate is a good ionizing solvent for the salts. In addition, Stokes radii and effective fadii of ions have been calculated by Stokes law and Nightingale method, repectively. From the results, it appears tha alkylammonium ions and picrate ion seem to be not solvated, and tha iodide ion is fairly solvated in ethylene carbonate.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.709-716
• /
• 2004

This paper describes an intelligent real-time monitoring system of a semiconductor processing equipment, which determines normal or not for a wafer in processing, using multiple time-series pattern recognition. The proposed system consists of three phases, initialization, learning and real-time prediction. The initialization phase sets the weights and tile effective steps for all parameters of a monitoring equipment. The learning phase clusters time series patterns, which are producted and fathered for processing wafers by the equipment, using LBG algorithm. Each pattern has an ACI which is measured by a tester at the end of a process The real-time prediction phase corresponds a time series entered by real-time with the clustered patterns using Dynamic Time Warping, and finds the best matched pattern. Then it calculates a predicted ACI from a combination of the ACI, the difference and the weights. Finally it determines Spec in or out for the wafer. The proposed system is tested on the data acquired from etching device. The results show that the error between the estimated ACI and the actual measurement ACI is remarkably reduced according to the number of learning increases.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.39-46
• /
• 2016

This paper describes the third order feedforward delta-sigma modulator with inverter-based integrators and a 1.5bit comparator for the application of audio signal processing. The proposed 3rd-order delta-sigma modulator is multi-bit structure using 1.5 bit comparator instead of operational amplifier. This delta-sigma modulator has high SNR compared with single-bit 4th-order delta-sigma modulator in a low OSR. And it minimizes power consumes and simplified circuit structure using inverter-based integrator and using inverter-based integrator as analogue adder. The modulator was designed with 0.18um CMOS standard process and total chip area is $0.36mm^2$. The measured power cosumption is 28.8uW in a 0.8V analog supply and 66.6uW in a 1.8V digital supply. The measurement result shows that the peak SNDR of 80.7 dB, the ENOB of 13.1bit and the dynamic range of 86.1 dB with an input signal frequency of 2.5kHz, a sampling frequency of 2.56MHz and an oversampling rate of 64. The FOM (Walden) from the measurement result is 269 fJ/step, FOM (Schreier) was calculated as 169.3 dB.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.44-49
• /
• 2012

Purpose: In the whole body PET/CT scan, it is natural to lift the patient's arm for its quality improvement. However, when the lesion is located in head and neck, the arms should be located lower. This study was designed to compare the CT effective dose for each arm position applying Automatic Exposure Control (AEC). Materials and Methods: 45 patients who had $^{18}F$-FDG whole body PET/CT scan were studied with Biograph Truepoint 40 (SIEMENS, GERMANY), Biograph Sensation 16 (SIEMENS, GERMANY), Discovery STe 8 (GE healthcare, USA). The CT effective dose of 15 patients for each equipment was measured and comparatively analyzed in both arm-lifted position and lower-arm position. ImPACT v1.0 program was used as the method of measurement for CT effective dose. For the statistics analysis, Paired t-test which paired with SPSS 18.0 statistic program was applied. Results: In the case of arm-lifted, it was measured as $6.33{\pm}0.93mSv$ for Biograph Sensation 16, $8.01{\pm}1.34mSv$ for Biograph Truepoint 40, and $9.69{\pm}2.32mSv$ for Discovery STe 8. When arms are located lower position, it was measure as $6.97{\pm}0.76mSv$, $8.95{\pm}1.85mSv$, $13.07{\pm}2.87mSv$ for each. CT effective dose according to the arm position was 9.2% for Biograph Truepoint 40, 10.5% for Biograph Sensation 16, and 25.9% for Discovery Ste 8. The statistics analysis showed the meaningful difference ($p$<0.05). Conclusion: For the whole body PET/CT case, CT effective dose applying AEC was decreased the radiation exposure of the patients when the arm was lifted for 15.2% of average value. The patient who has no lesion in head and neck would decrease the artifact occurrence in objective part and lower the CT effective dose. Also, for the patient who had lesion in head and neck, the artifact in objective part can be lower by putting the arms down, the fact that CT effective dose increases should be concerned in its whole body PET/CT scan.