• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.3
• /
• pp.251-260
• /
• 2003

Tunnel blasting has been performed with V-cut to investigate the characteristics. Blasting vibrations were measured at two directions, the proceed direction and side direction. Propagation characteristics were determined by regression analysis; square root scaled distance and cube root scaled distance with maximum charge per delay of the blast. Testing result, The cross point was 62m in the allowable vibration velocity of 3mm/sec and 46m in 5mm/sec. Also, vibration level with measuring point was highest and decayed fastest, adapting to cube root scaled distance, for the proceed direction on ground.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.145-148
• /
• 2008

Korea Aeronautics Research Institute (KARI) is developing a turbo pump that has 1-stage impulse turbine and relatively high tip clearance for safety. The objective of this research is to investigate the effect of reaction on tip clearance loss in axial turbines. Both cascades were tested in a subsonic wind tunnel. In each cascade, total pressure was measured for tip clearance ranging from 1% to 20% of chord. In results, increasing tip clearance, total pressure loss in reaction turbines is continually increased but impulse turbines keep almost same level of mass averaged total pressure loss. When tip clearance becomes more than 10% of chord, mass-averaged total pressure loss in impulse turbines is less than in reaction. This means that when tip clearance is more than 10% of chord, impulse turbines have better efficiency than reaction turbines.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.2
• /
• pp.35-42
• /
• 2021

In this study, a steel frame that realized the second floor of a structure was fabricated in referring to NFPA 13. In addition, a riser pipe system with groove joints was installed, and a seismic simulation test was performed using static cyclic loading. Cyclic loading tests on the maximum allowable side sway of seismic design standards for buildings in Korea were conducted using actuators to analyze the seismic behavior of the riser pipe system and major piping elements due to the deformation of the steel frame structure or the displacement-dominant behavior caused by the relative displacement between the structural members in the event of a seismic load. Moreover, the deformation angle of the riser pipe system was measured using an image measurement system because it is difficult to measure using the conventional sensors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.138-147
• /
• 2021

The purpose of this study was to develop a measuring tool for the health promotion behavior of Korean nurses. This would address the lack of a proven tool that reflects the nature of the nurses' nursing environment. This study was conducted on 530 nurses from January to December 2019. A literature review and focus group interview were conducted, data analysis was carried out to measure validity and reliability, and the conceptual framework was constructed by applying the IMB model. Five factors namely self-concept (2 questions), hospital life management (4 questions), knowledge and information regarding health (5 questions), physical and mental stress management (3 questions), and work adaptation (2 questions) were framed into 16 questions. The model fit was 346.23 (��<.001), Parsimonious Normed Fit Index (PNFI) was 0.60, and Parsimonious Comparative Fit Index (PCFI) was 0.63, which met the acceptance criteria, and the Root Mean Square Error of Approximation (RMSEA) was 0.10. Goodness of Fit Index (GFI) was 0.88, Comparative Fit Index (CFI) was 0.85, and Incremental Fit Index (IFI) was 0.85 which were found to be acceptable as per the applicable standards. All items had a Cronbach's �� score of .85, which ensured stable reliability. The nurse's health promotion behavior measurement tool developed in this study will be used to measure the nurse's health promotion behavior in terms of nursing practice which will help in understanding the broad contours of this behavior.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.327-345
• /
• 2020

The effects of ground vibration on lava tubes during construction were studied to aid design of management and preservation measures for lava tubes. Ground conditions were assessed by RMR (Rock mass rating) and Q-system classifications for the Geomunoreum lava tubes, and vibration velocity was measured during in situ blasting tests in the Manjanggul and Yongcheondonggul lava tubes. Results indicate that the higher the rock quality, the greater the effect of vibration, although there is no clear linear relationship due to ground heterogeneity. A relationship derived between vibration velocity (PPV) and intensity (dB(V)) on the basis of blasting tests indicates that a vibration level of < 0.285 cm/sec meets the regulatory limit of 0.371 cm/sec and 65 dB(V) during daytime, and 0.285 cm/sec and 60 dB(V) during night. For blasting vibrations, square- and cube-root scaled distances are linearly correlated, with R² ≥ 0.76. On the basis of this correlation, explosive-charge weights meeting the 0.2 cm/sec vibration criterion for cultural heritage were estimated to be 2.88 kg at 50 m distance, and 11.52 kg at 100 m.

• Journal of Teachers' Pension
• /
• v.3
• /
• pp.69-105
• /
• 2018

저출산과 고령화 이슈는 우리사회의 경제적 문제뿐만 아니라 공적연금의 재정지속가능성 여부와도 맞물려 있다. 실제로 우리나라 모든 공적연금은 사회보험역설(social insurance paradox)이 지속되기 힘든 새로운 도전에 직면하였다. 즉, 재정지속가능성은 제도 내적 연금개혁 혹은 제도 외적 재정지원이 없다면 항시적 수지불균형 상태가 누적될 것으로 예측된다. 이에 정부는 직접 고용과 관련된 공무원연금과 군인연금에 대해서만 연금충당부채를 산출하도록 규정하고 있다. 발생주의회계를 채택한 국제회계기준(종업원급여)을 참조하여 연금충당부채 산출을 위한 연금회계준칙(2011.8.3. 제정; 2011.1.1. 시행) 그리고 '연금회계 평가 및 공시 지침(2011.8.3. 고시 : 이하 편의상 연금회계지침이라 함)'을 신설하였다. 사학연금에 적용성 여부 논의에 앞서, 이들의 산출방법상의 문제점을 먼저 살펴보았다. 첫째, 공적연금은 공통적으로 세대 간 합의에 의해 운영되는 사회계약에 해당하므로 제도의 연속성을 전제로 한다. 하지만 연금회계준칙 및 지침은 제도의 청산을 전제로 현재 가입자(연금 미수령자, 연금 수령자)에 대해서 연금충당부채를 산출하는 폐쇄형측정(closed group valuation)을 채택하고 있다. 즉, 폐쇄형은 제도의 연속성 속성을 반영하고 있지 못하고 있어 기본 전제와 모순된다. 둘째, 공무원연금과 군인연금은 이미 기금 소진(최소한의 유동성기금만 보유함)이 되었고 정부의 보전금에 의해 수지 균형이 유지되는 순수부과방식 체계로 전환되었다. 따라서 연금충당부채는 해당 적립기금의 과소 여부를 판정하는 재정상태 기준 값에 해당하므로 기금소진이 진행된 현 상황에서는 산출의 목적, 필요성을 찾기가 힘들다. 부언하면, 제도 외적 재정지원(보전금)에 의한 수지균형방식이라면 발생주의회계보다는 현금주의회계가 회계의 목적적합성이 높다. 마지막으로 연금충당부채 산출에 있어 가장 민감한 할인율 설정 권한을 기재부장관에게 위임한 내용은 산출의 객관성, 일관성을 확보하기 힘들다고 판단된다. 이를 해소하기 위한 방안으로 본 연구에서는 5년마다 실시하고 있는 장기재정계산에서 예측된 명목 기금투자수익률을 연도별로 적용할 것을 권고하고 있다. 현행 정부회계기준을 사학연금제도에 그대로 적용하기에는 상당한 무리가 있다. 그 이유와 공시방안에 대해 살펴본다. 현재 사학연금은 기금소진 이슈로부터 상당부분 벗어나기 위해 2015년 연금개혁을 단행한 바가 있고 이를 통해 상당기간 부분적립방식 체계가 유지될 것이다. 물론 제도 외적 재정지원은 사학연금법 제53조의7에서 정부지원의 가능성만을 열어 놓은 상태이므로 미래기금소진의 가능성은 상존한다고 볼 수 있다. 먼 미래에는 순수부과방식 체계로 전환될 개연성이 높다. 이러한 재정의 양면성을 본 연구에서는 이중재정방식(dual financing system)이라고 한다. 이러한 속성을 고려하여 연금충당부채(연금채무라는 표현이 적합할 것으로 사료됨)를 산출하고 공시하여야 한다. 그 주요 연구 결과는 다음과 같이 요약된다. 먼저 현행 부분적립방식의 재정상태 검증을 위해 연금채무를 산정할 필요성이 있다. 이를 위해 본 연구에서는 기발생주의(예측단위방식 적용)에 근거한 폐쇄형 측정I(제도 종료를 전제로 현 가입자의 잠재연금채무(IPD) 산출에 초점을 둠) 그리고 미래발생주의(가입연령방식 적용)에 근거한 폐쇄형 측정II(추가적으로 현 가입자의 일정기간 급여 및 기여 발생 허용)을 제안하고 있다. 이를 통해 미적립채무의 규모 그리고 이를 해소하기 위한 상각부담률을 산출할 수 있다. 최종적으로 미래 가입자들까지 포함하고 기금소진 가능성까지 고려하는 개방형측정(open group valuation)을 다루고 있다. 단, 본 연구에서는 공무원연금처럼 기금부족분에 대해서 향후 정부보전금이 있다는 가정 하에 공시 방법을 제시하고 있다. 요약하면, 현행 사학연금제도는 현재와 미래의 재정 양면성을 모두 고려하여 연금채무 및 미적립채무를 공시하여야 한다. 부언하면, 현재 부분적립방식 재정상태를 반영하는 연금채무는 발생주의회계를 적용하고 미래에 도래할 순수부과방식 재정상태는 현금주의회계를 적용할 것을 최종 결론으로 도출하고 있다. 마지막으로 본 연구의 한계는 정부보전금의 가능성에 대한 법률적 해석과 병행하여 책임준비금 범위의 안정적 확대를 전제로 한 공시 논의 그리고 보전금의 책임한도 범위에 따른 공시 논의 등은 다루고 있지 않다는 점이다. 이러한 논의 사항은 향후 연구과제로 두고자 한다.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.440-447
• /
• 2020

The demand for large-scale horticultural complexes utilizing reclaimed lands is increasing, and one of the pending issues for the construction of large-scale facilities is to establish foundation design criteria. In this paper, we tried to review previous studies on the method of reinforcing the foundation of soft ground. Target construction methods are spiral piles, wood piles, crushed stone piles and PF (point foundation) method. In order to evaluate the performance according to the basic construction method, pull-out resistance, bearing capacity, and settlement amount were measured. At the same diameter, pull-out resistance increased with increasing penetration depth. Simplified comparison is difficult due to the difference in reinforcement method, diameter, and penetration depth, but it showed high bearing capacity in the order of crushed stone pile, PF method, and wood pile foundation. In the case of wood piles, the increase in uplift resistance was different depending on the slenderness ratio. Wood, crushed stone pile and PF construction methods, which are foundation reinforcement works with a bearing capacity of 105 kN/㎡ to 826 kN/㎡, are considered sufficient methods to be applied to the greenhouse foundation. There was a limitation in grasping the consistent trend of each foundation reinforcement method through existing studies. If these data are supplemented through additional empirical tests, it is judged that a basic design guideline that can satisfy the structure and economic efficiency of the greenhouse can be presented.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.1
• /
• pp.7-13
• /
• 2000

Purpose : To assess the distortion of MRI with the Leksell stereotactic radiosurgery system in variable pulse sequence and imaging plane through phantom study, to find most adequate imaging plane and pulse sequence for stereotactic radiosurgery system. Materials and methods : We made the phantoms for MRI and get images in variable conditions and analyzed the image distortion using image analysis program, and statistically using paired student t-test. Results : The transeverse plane images had acceptable error ranges bless than 1.5mm) in all pulse sequence in both the analysis of fiducial marker in stereotactic G-frame and the phantom study. The coronal plane images had unacceptable large errors (more than 1.7mm) in the analysis of fiducial marker in the stereotactic G-frame, but had corrected small errors (less than 1.5mm) in the phantom study. Conclusion : We find from the phantom study that the present MR machines are adequate for stereotactic surgery system in frequently used pulse sequences, and imaging planes.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.527-532
• /
• 2014

Purpose: The matching of the optical center and the pupil center was measured by photographs in wearing glasses. In this study, the influences of the induced prism by the mismatching are studied. Methods: 74 subjects (148 eyes) who were spectacles wearer were participated in this study. The mean age was $29.19{\pm}12.22$ years (range 19-55 years). The facial photographs of subjects were taken while wearing spectacles. The matching of the corneal reflected image and optical center of the spectacle lens in the horizontal deviations, and the vertical deviations were measured by the observation of the photo image. The prisms induced in accordance with various frame type were calculated from the mismatching deviations. Results: The binocular horizontal deviations were $1.55{\pm}1.70mm$ for the metal frame, $1.71{\pm}2.21mm$ for the clings type plastic frame, and $1.15{\pm}1.38mm$ for the plastic frame. In the horizontal direction induced prism, the ratio over the tolerance was 23%. The ratio were the 17.6% at the BI prism, and 5.4% at the BO prism. The binocular vertical deviation comparisons were $3.93{\pm}1.91mm$ for the metal frame, $5.79{\pm}1.93mm$ for the clings type plastic frame, and 1$6.01{\pm}2.94mm$ for the plastic frame. In the vertical direction induced prism, the ratio over the tolerance was 44.6%. Based on the refraction power, the ratio were 12.2% at -0.25${\leq}-3.00$, and 32.4% at -3.00${\leq}-12.00D$. Conclusions: The induced prisms in the horizontal direction were much in the BI prism. The binocular vertical deviations of the glasses.