• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6602-6609
• /
• 2013

This study is expected to provide background data for establishing mitigation measures for malodor and for comparing complex odor criteria. The impact of malodor at the afflicted locations was analyzed using Industrial Source Complex Short Term 3 (ISCST3) model, which was recommended by the EPA. The Odor Emission Rates (ODR) for piglets and hogs were predicted based on the average, minimum, and maximum emission rates as classification. The forecasting result of the complex odor modelling of pigsty showed that tolerance limit was exceeded at an adjacent administration building, but tolerance limit was not surpassed at an afflicted location which was within 185m from the pigsty. The ISCST3 modelling of the satisfactory ODR for tolerance limit was accomplished at the administration building. From the prediction of this modelling, maximum emission rates based on 1hr at administration building were 10.59~52.93, 19.05~31.76, and 10.59 $OU/m^3/s/m^2$ at emission rates of 50%, 30%, and 10%. This emission rate was slightly higher than the tolerance limit of 10.00 $OU/m^3/s/m^2$. However, it was inferred that the tolerance limit could be satisfied if the emission rate of 10% was controlled.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.12-17
• /
• 2012

Purpose : The patient's clothes and sheet after radioiodine therapy must be disposed of by related regulation. That must be disposed of as radioactive wastes, but that is reusing after radioactivity decay by keeping for the certain period of time. In general, The minimum storage period calculate by standard of take radioactive substance out of radiation controlled area based on measured surface contamination level. But the measurements of surface contamination level are able to differ by measurement method. In this paper, I wish to calculate the minimum storage period of patient's clothes and sheet after radioiodine therapy by measure nuclide concentration offered by the regulation on self-disposal of radioactive wastes. Materials and Methods : The whole area of patient's clothes and sheet measured 31 patients(male:9 patients, female:22 patients), who had radioiodine therapy(3.7 GBq:13 patients, 5.55 GBq:16 patients, 7.4 GBq:2 patients) from july 2011 to march 2012. The minimum storage period is calculated by the regulation on self-disposal of radioactive waste(100 Bq/g) and standard of take radioactive substance out of radiation controlled area(4 kBq/m2) Results : The minimum storage period of pillow sheet, upper uniform, lower uniform by standard of take radioactive substance out of radiation controlled area were each 4.6 days, 63days, 78 days. The minimum storage period of pillow sheet, upper uniform, lower uniform by the regulation on self-disposal of radioactive waste were each 18.1 days, 43 days, 62 days. Conclusion : We can verify that patient's clothes and sheet after radioiodine therapy exists a great deal of radioactive contamination. The minimum storage period calculation of patient's clothes and sheet is better suited to applying nuclide concentration offered by the regulation on self-disposal of radioactive waste. I recommend, To keep for at least 2 months of the patient's clothes and sheet contaminated radioactivity, for prevent contamination and unnecessary radiation exposure.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.201-215
• /
• 1993

The health status of workers in a foundry was analyzed in a study which consisted of evaluations of respiratory health together with environmental measurements. The results from environmental measurements showed values exceeding permissible exposure limits. A t-test was done with log transformed and untransformed data to examine the statistical significance for the noncompliance with exposure standards. For the analysis of categorical health outcomes, $\chi$-square test with 2 $\times$ 2 tables and logistic regression analysis were employed. For continuous variables, multiple linear regression was done against assessed risk factors. Pros and cons of different parameters in the compliance (or noncompliance) testing were presented. Respiratory function did not show any relation with occupational exposures, which may be due to the healthy worker effects. Strategies for controlling time dependent covariates were discussed in relation to the healthy worker effect. The scope of statistical analysis in occupational health studies is still limited in Korea without a suitable external comparison group such as credible vital statistics for the whole nation. Internal comparisons between different exposure status often result in unstable estimates of effect, and proportional morbidity study is discussed as an alternative potential research tool.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.134-142
• /
• 2003

Most of the vibration and noise generating in small boats come from shipboard machinery such as main engine, generator and auxiliary machinery etc. In order to build up the comfortable environment for the crew and to reduce the ambient noise, and provide basic materials for reasoning selection application, the design under allowable vibration & noise conditions and the examination of vibration condition of the new ships, this paper researches the frequency spectrum and order analysis of vibration and noise. The obtained results are summarized as follows : Through comparing the small boat internal noise with the regulation of IMO and DNV, it revealed that the noise level of main engine room accords with the standard, and the noise of other places are beyond the values. In this paper, two boats are analyzed, which are same type, same size and power, but the main engines noise of them is different. In order to search the noise source, the noise of main engine room and relative parts are measured. The third order of measured points is dominant in frequency domain by the order analysis.

• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.69-76
• /
• 2003

Test blasting has been performed with V-cut to investigate the characteristics. Blasting vibrations were measured at two directions, the proceed direction and side direction. Propagation characteristics were determined by regression analysis; square root scaled distance and cube root scaled distance with maximum charge per delay of the blast. Testing result, The cross point was 62m in the allowable vibration velocity of 3mm/sec and 46m In 5mm/sec. Also, vibration level with measuring point was highest and decayed fastest, adapting to cube root scaled distance, for the proceed direction on ground.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.131-136
• /
• 2006

전조등의 밝기 변동에 대한 운전자의 시인성 및 뇌파측정, 심리평가를 행하고 이를 바탕으로 전조등 밝기변화의 한계값과 운전자의 안전성을 고려한 평가 알고리즘을 개발하였다. 전조등의 밝기 변화 한계치는 심리평가의 설문지 작성을 통한 주관적 평가를 바탕으로 밝기 변화, 눈 깜박임, 불쾌감 등에 대한 한계값을 제시하였다. 그리고 뇌파측정을 바탕으로 정신적, 시각적 스트레스에 대한 한계값을 제시하였으며, 운전자의 시인성 측정을 바탕으로 차량을 장애물의 위협 없이 안전하게 정지하기 위한 한계값을 제시하였다. 안전성 평가 알고리즘은 장애물을 인식하고 브레이크 페달을 밟기 시작하기 까지 최대한 허용할 수 있는 시간인, 여유 시간 이내에 전압변동을 완료하고 최초의 정상 전압으로 복귀하는 경우와 그렇지 않은 경우를 적용할 수 있는 2종류의 알고리즘을 개발하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.138-138
• /
• 2018

국내의 기상 이변으로 인해 강우의 급격한 증가로인해 하천의 허용유량이 초과하여 제방의 침식 또는 하상변화등의 문제가 발생되고 있다. 국내 하천 사업에서 호안공법을 도입할 때 유속과 하상재료에 따라 하천의 하상변동에 미치는 영향을 파악하고 설계하는 것은 하천설계기준에 있어 매우 중요하다. 본 연구에서는 다양한 유속 범위에서 하상재료에 따라 세굴 정도를 측정하고 하상재료에 대한 한계유속과 세굴 관계를 통해 호안 및 제방에 발생하는 영향을 정성적 평가를 통해 기초적 데이터베이스를 구축하고자 실험연구를 진행하였다. 실험에 사용된 재료는 실제 제방을 구성하고 있는 재료로 모래, 황토, 자연제방에 있는 응고된 토양을 이용하였으며, 실험실규모의 고속수로 실험 장치를 이용하여 유속의 변화에 따라 재료의 세굴을 측정하고 이를 통해 세굴 전 후의 재료를 비교분석하여 고유속흐름에서 하상재료에 따른 기초 세굴평가를 하고자 본 연구를 진행하였다. 기초 세굴평가에 사용되는 계측 기기, 평가는 인제대학교에서 소프트웨어, 특허 등록된 검증된 기법을 통해 산정하였다. 본 연구의 결과는 다양한 수리특성 및 세굴측정을 통한 재료에 대한 기초평가와 재료의 정량적 평가를 통한 호안 및 제방에 발생하는 정성적인 영향을 산정하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5956-5963
• /
• 2013

By the activation of environment-friendly river works, application of vegetation mats is increasing, however, evaluation techniques for hydraulic stability of vegetation mats are not presented. This study is conducted to develop the objective test method for vegetation mats. Two kind of vegetation mats are tested by the real scale experiments, and hydraulic quantities are measured and analyzed to evaluate acting shear stresses. To evaluate soil loss, Terrestrial 3D LiDAR measurement is conducted and soil loss index are calculated from changes of bed elevation. Quantified evaluation for permissible shear stresses is conducted by graphical method for acting shear stresses and soil loss index. By the results of precision survey, changes of sub soil are limited to local range in stable cases and relatively large changes of sub soil which is similar to natural river bed are detected in unstable cases. From the study, evaluation of permissible shear stresses by ASTM D 6040 is avaliable in the failure mechanism and failure criteria by soil loss index.

• KNOM Review
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2021

With the spread of the Internet, users can easily receive various services and exchange information through the web. There are several requirements for building a web system, and it must be developed using a programming language or platform for user purposes. Residual material information refers to information on medicines and pesticides added to food, and residual material standards are used to measure the level of residues in food produced by companies and farmers to determine whether those levels meet domestic or international standards. Currently, the Ministry of Food and Drug Safety provides residual acceptance standards for food additives, including food, pesticides and animal medicines, in the form of documents, which must be serviced smoothly and conveniently by users through the establishment of a web system. It must also meet a variety of requirements, including user accessibility, such as scalability and compatibility. This paper proposes react-based residual material information web system that allows users to access more conveniently and receive residual material information smoothly. We measured the speed for the three inportant functions of information provision and compared them with existing residual material information web systems and qualitatively evaluated the seven essential requirements: scalability, compatibility, and accessibility.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.123-127
• /
• 2008

Purpose: As the demand of a simple and precise method increases to evaluate the performance of the inverter type x-ray unit, we evaluated the usefulness of the recently-introduced X-ray Multi-Function Test Device (moldel : Xi (unfors)-prestige). Method: We compared the performance of X-ray Multi-Function Test Device (XMFTD) which is non-inveasive type device with the performance of Dynalyzer III that has been most widely used inveasive type measure device. Result: X-ray output dose was increased a little in the XMFTD, but both devices were below the performance evaluation standard, 0.002 in the output reproducibility. Linearity of XMFTD were below 0.1 which means that Dynalyzer III showed more excellency in linearity. As the the accuracy of exposure factor, 1.8 and 2 tube voltage, 2.01 and 2.3 tube current were measured. The exposure time was also measured by 0.01 sec ${\pm}10%$. Both devices were within the acceptance of performance evaluatioin standard. Conclusion: We proved the usefulness of X-ray Multi-Function Test Device (model: Xi (unfors)-prestige) to evaluated the performance on reproductibility and linearity of X-ray output and accuracy of exposure factor of inverter type unit.