• Bulletin of Food Technology
• /
• 제21권2호
• /
• pp.55-61
• /
• 2008

본 연구에서는 발효기간 중 SAM 생성량 증진김치의 최적조건을 개발하기 위해 배추김치의 재료별 및 제조법에 따른 발효기간 중의 SAM 함량 변화를 측정하였다. 발효가 진행됨에 따라 모든 김치군의 pH는 발효초기에는 급격히 감소하다가 후기에는 pH $4.2{\sim}4.3$으로 비슷하게 나타났다. 산도는 pH와 비슷한 경향을 보이면서 발효초기에는 급격히 감소하다가 후기에는 서서히 증가하는 경향을 보였다. SAM 함량은 가장 기본적인 재료로만 제조한 표준(A)김치는 가장 낮게 나타났고, SAM이 검출되는 원 부재료에 SAM 함량이 많은 김치가 SAM 함량도 높게 나타났다. 모든 김치군 중 I김치가 가장 높은 SAM 함량을 나타냈으며, 김치별 SAM 함량이 가장 높은 발효시점은 A, K김치는 pH $4.6{\sim}4.9$, 산도 $0.38{\sim}0.57$0.57, D, H김치는 pH 6.3, 산도 $0.24{\sim}0.27$, E, G김치는 pH $6.1{\sim}6.6$, 산도 $0.05{\sim}0.14$0.14, B, C, F, I, J김치는 pH $4.3{\sim}5.3$, 산도 $0.45{\sim}1.02$에서 나타났다. 따라서 대부분의 김치는 적숙기시점이 되었을 때 B, E, G, H김치는 초기발효 때부터 SAM 함량이 높게 나타났다. 또한 발효가 진행됨에 따라 SAM 함량은 감소하는 경향을 보였다. 따라서 연구결과 주재료인 채소류와 젓갈의 함량비를 적절히 제조하여 최적의 SAM 생산능력의 발효시점과 김치맛에 영향을 끼치지 않는 관능적으로 적합하고 SAM 생성이 보다 효과적으로 유도되는 최적의 조건에 대한 실험들이 추가적으로 필요하다고 판단된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제23권4호
• /
• pp.79-85
• /
• 2009

This paper describes the degradation properties of ZnO surge arresters impressed by lightning impulse currents. To investigate the deterioration behaviors of ZnO surge arresters due to lightning surges, the 8/20[${\mu}s$], 2.5[kA] standard lightning impulse currents were injected to the ZnO surge arrester under test. The power frequency AC and DC leakage currents flowing through the ZnO surge arresters with and without the injection of lightning impulse currents were measured. As a result, the leakage currents are increased and the asymmetry of the AC leakage current is pronounced as the number of injection of the impulse current increases. The ZnO grain of the surge arrester without the injection of lightning surges are uniform but the ZnO grain of the ZnO surge arrester with the injection of lightning impulse currents are deformed. Also, it was found that the decrease of the $Bi_2O_3$ due to the lightning impulse current leads to the lack of grain boundary layer and the current concentrated by the lack of grain boundary layer play an important role to degrade nonlinear property of ZnO surge arrester blocks.

• The KIPS Transactions:PartD
• /
• 제9D권5호
• /
• pp.897-902
• /
• 2002

Because of rapid evolution of software technique, numerous software professionals have been concerned with component based development methodologies. However, it is hard to find out a systematic technique for the selection of COTS (Commercial Off The Shelf) component in consumer position. Up to date, the major of component quality evaluation is object-oriented metric based evaluation methodology. But this paper present four step process and evaluation criteria based on MCDM (Multiple Criteria Decision Making) technique for optimal COTS component selection in consumer position. We considered funtionality, efficiency, usability based on IS0/IEC 9126 for Quality measurement and executed practical analysis about commercial EJB component in internet. This paper show that the proposed selection technique is applicable to optimal COTS component selection.

• Journal of KIISE:Databases
• /
• 제37권2호
• /
• pp.113-120
• /
• 2010

XML is broadly using for data storing and processing. XML is specified its structural characteristic and user can query with XPath when information from data document is needed. XPath query can process when the tern and structure of document and query is matched with each other. However, nowadays there are lots of data documents which are made by using different terminology and structure therefore user can not know the exact idea of target data. In fact, there are many possibilities that target data document has information which user is find or a similar ones. Accordingly user query should be processed when their term usage or structural characteristic is slightly different with data document. In order to do that we suggest a XML document ranking method based on path similarity. The method can measure a semantic similarity between user query and data document using three steps which are position, node and relaxation factors.

• Journal of Agricultural Extension & Community Development
• /
• 제21권3호
• /
• pp.121-154
• /
• 2014

This study explores standardization plans concerning industrialization of Hanjii which is traditional culture resources of rural community. Hanji is very useful in many ways, and its usefulness is not confined to only paper. In other words, it comes to have architectural uses, agricultural uses, clothing uses, and medical uses through fusion and convergence. However, the expansion of Hanji market dose not lead to profits for related stake holders because its standardization is not nurtured yet. For standardization, this paper argues, first, a industrial definition of Hanji is needed in which Hanji's own characteristics is involved. Besides maintaining traditional characteristics, the definition and quality standards of Hanji needs to be established by considering a given condition of Hanji industy. Second, a satisfactory method to measure Hanji's own material characteristics(i.g., mulberry paper content and long-term sustainability), which affects Hanji's quality, needs to be developed and standardized. Third, a government standard is urgently needed in order to keep consumers from being confused when they select Hanji products. The standardization of Hanji products and technology needs to be established in both case of current Hanji market and newly developed products and technology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제28권1호
• /
• pp.76-79
• /
• 2017

This paper presents the electromagnetic shielding structure for low frequency wireless power transfer system with magnetic induction method using soft magnetic materials. Soft magnetic materials have advantages such as high permeability and low magnetic loss, but have undesirable effect of power loss by eddy current. To overcome this, we proposed the patterned soft magnetic material to suppress the eddy current path. For validity of this paper, we simulated the coil transfer efficiency and the radiated electromagnetic field, and fabricated the proposed structure using 79-permalloy. The measured results shows good agreements with the simulated results and reduction of the radiated electromagnetic field compared to commercial ferrite plate.

• Journal of Radiation Protection and Research
• /
• 제11권1호
• /
• pp.70-76
• /
• 1986

In order to establish the national standards of neutron measurements, a manganese sulphate ($MnSO_4$) bath system was developed under the IAEA technical support. This bath system was made up of a spherical s.s. 316 L bath, of 3.5 mm thick and of 125 cm internal diagmeter, filled with a manganese sulphate solution, a solution circulating system, and a $^5Mn\;{\gamma}-ray$ monitoring system. The solution pumped from the bath was introduced into a Marinelli beaker-type monitor vessel which was equipped with two seperate detectors, $3.8cm{\phi}{\times}3.8cm$ NaI(T1) crystals. The performance of the system were tested using the neutron sources, $^{241}Am-Be\;and\;^{252}Cf$, mounted at the center of the bath. From the decay curve analysis of $^{56}Mn$ activity, neutron emission rate of $^{252}Cf$ by the comparative method was obtained to be $3.71{\times}10^7\;n/s\;per\;50{mu}g$ as of November 15, 1985.

• Journal of the Korea Society of Computer and Information
• /
• 제17권10호
• /
• pp.107-116
• /
• 2012

The applying of semantic technologies that aim to let computers understand and automatically process the meaning of the interlinked data on the Web is spreading. In Semantic Web, understanding and accessing the associations between data that is, the meaning between data as well as accessing to the data itself is important. W3C recommended RDF (Resource Description Framework) as a standard format to represent both Semantic Web data and their associations and also proposed several RDF query languages in order to support query processing for RDF data. However further researches on the query language definition considering the semantic associations and query processing techniques are still required. In this paper, using the suffix array-based indexing scheme previously introduced for RDF query processing, we propose a query processing approach to handle ${\rho}$-path query which is the representative type of semantic associations. To evaluate the query processing performance of the proposed approach, we implemented two different types of query processing approaches and measured the average query processing times. The experiments show that the proposed approach achieved 1.8 to 2.5 and 3.8 to 11 times better performance respectively than others two.

• Journal of the Korean Society of Radiology
• /
• 제14권6호
• /
• pp.819-825
• /
• 2020

The purpose of this study was to evaluate the usefulness of the developed air mattress for reducing the deterioration of image quality due to the scattered radiation generated on the computed tomography equipment table. 5 cm and 10 cm thick air mattresses were developed and the image quality was measured by scanning the AAPM phantom according to thickness and thickness. Statistical significance was confirmed by One Way Analysis of Variance(ANOVA) Compared with the AAPM phantom scanned in the standard method, the image with the air mattress did not show any difference, but when the air mattress was not applied, the CT number and uniformity were low and the noise was high, and the spatial resolution Respectively. The developed air mattress has no harmful effect on the diagnostic image, it is very effective in improving the image quality and can increase the CT image quality by simply applying Air Mattress to existing equipment without using the technology applied to the latest and high-cost equipment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제45권12호
• /
• pp.8-14
• /
• 2008

A fully CMOS-integrated carbon nanotube (CNT) sensor array is proposed. After the sensor chip is fabricated in commercial CMOS process, the CNTs network is formed on the top of the fabricated sensor chip through the room-temperature post-CMOS processes. When the resistance of the CNT is changed by the chemical reaction, the read-out circuit in the chip measures the charging time of the $R_{CNT}$-Capacitor. finally the information of measured frequency is converted to a digital code. The CMOS sensor chip was fabricated by standard 0.18um technology and the size of the $8{\times}8$ sensor array is $2mm{\times}2mn$. We have carried out an experiment detecting the biochemical material, glutamate, using this sensor chip. From the experiment the CMOS sensor chip shows the feasibility of sensor for the simultaneous detection of the various target materials.