• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.442-448
• /
• 2013

There are two approaches in measuring colors (or chromaticity) in water, i.e., visual comparison method and spectrophotometric method. The color of sample was determined by comparing with that of platinum-cobalt standard solution in the visual comparison method. Single or multiple wavelengths are used for the spectrophotometric method. As the accuracy and precision of visual comparison method depend on the eye sight of the analyzer, the results are not so reliable and representative. In addition, it is hard to measure chromaticity less than 5 TCU. Single wavelength approach in spectrophotometric method, can be applied for groundwater or surface water with natural organic matter (i.e., humic substances) while it's hard to measure the color of wastewater which includes anthropogenic chemical compounds. The measurements with multiple wavelengths approach resulted in reliable data regardless of the source of sample water, i.e., surface water and wastewater. As dozens of measurements and complicated calculations for one sample were required for the multiple wavelengths approach, the approach could not be applied for field measurement. In the present study, the authors tested efficient method which could measure the color of water sample accurately and precisely regardless of the source of water. With the colorimeter with multiple wavelengths and calculation program, the colors of water samples could be measured within 3~4 seconds with accuracy and precision.

• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.249-258
• /
• 2008

Purpose : Abdominal obesity with visceral fat accumulation have been known to be intimately associated with the development of metabolic syndrome. Therefore, it is important to estimate the precise amount of visceral fat. Ultrasonography has been reported that it is a simple and noninvasive method for visceral fat evaluation. Purpose of this study is to evaluate the association of ultrasonographic visceral fat thickness, anthropometric indexes, and risk factor of metabolic syndrome, and to investigate the cut-off value of abdominal visceral fat thickness leading to increased risk of metabolic syndrome. Materials and methods : The subject included 200 men and 200 women who visited D healthcare center in Daejeon from January to April 2008. The subcutaneous fat thickness and visceral fat thickness were measured by ultrasonograph. As anthropometric index, we measured body mass index, waist circumference and waist/height ratio. As for the risk factor of metabolic syndrome, we measured blood pressure, high density lipoprotein cholesterol, triglyceride and fasting serum glucose. Results : VFT was significantly correlated with waist circumference, (r=0.683/M, r=0.604/F), waist to height ratio (r=0.633/M, r=0.593/F) and BMI (r=0.621/M, r=0.534/F) in both men and women. In addition it was significantly correlated with Systolic blood pressure (r=0.229/M, r=0.232/F), Diastolic blood pressure ((r=0.285/M, r=0.254/F), high density cholesterol (r=-0.254/M, r=-0.254/F), Triglyceride (r=0.475/M, r=0.411/F), and Fasting blood sugar (r=0.158/M, r=0.234/F) in both men and women. The cut-off value of visceral fat thickness leading to the increased risk of metabolic syndrome was 4.58cm (sensitivity89.2%, specificity 71.2%) in men and 3.50cm (sensitivity61.2% specificity 80.8%) in women respectively. The odds ratio of the risk of metabolic syndrome was dramatically increased with the abdominal visceral fat thickness level over 6cm in men and 5cm in women. Conclusion : The visceral fat thickness using ultrasonography was significantly correlated with anthropometric indexes and risk factors of metabolic syndrome in both men and women. The cut-off value of visceral fat thickness leading to the increased risk of metabolic syndrome was 4.58cm in men and 3.50cm in women.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.448-448
• /
• 2015

급경사면의 세류간 토양침식은 지표면과의 강우입자 충돌에 의한 튀김현상과 면상흐름에 의한 토사이송 능력의 상호작용에 의해 영향을 받는다. 강우운동에너지와 면상흐름이 세류간 토양침식 및 토사유출 발생에 있어서 상대적인 기여도에 대한 연구는 국내뿐만 아니라 전 세계적으로도 미흡하다. 본 연구에서는 강우현상을 재현할 수 있는 강우모의 실험장비와 사면 토양침식 실험을 위한 소규모 토양플롯을 제작하여 실험에 사용하였다. 강우모의에 의한 강우운동에너지는 자연강우의 운동에너지 산정식의 계산결과와 비교했을 때, 약 0.58배의 규모를 재현했다. 강우입자의 충돌을 제어하기 위한 스트립을 토양플롯에 올려놓은 경우와 커버가 없는 나지상태에서 강우모의 실험을 한 경우 사면에서 발생한 지표유출수, 지표하유출수 및 토사유출 자료를 측정하고 분석하였다. 강우강도가 증가함에 따라 지표유출량은 증가하고, 지표하유출량은 상대적으로 감소했다. 지표커버는 지표유출의 첨두유량 발생시간을 지연시켰으며, 지표유출량과 지하수량의 변화를 초래했다. 지표커버에 의해 지표유출량은 평균 1.82배 감소하지만, 토사유출량은 평균 4.93배로 상대적으로 크게 감소하였다. 단위수류력과 토사유출량과 관계를 분석한 결과 강우운동에너지는 토양입자의 튀김현상에 의한 침식을 증가시킬 뿐만 아니라 지표유출수의 유속을 증가시켜 토사이송능력을 가중시키는 것을 확인하였다.

• 대한예방의학회:학술대회논문집
• /
• 2002.07b
• /
• pp.156-171
• /
• 2002

• Journal of the Korean Society for information Management
• /
• v.39 no.4
• /
• pp.269-306
• /
• 2022

This study aimed to develop indicators that can measure the digital transformation performance of science and technology information construction and sharing systems by utilizing the Digital Curation Maturity Models. For digital transformation, it is necessary to consider not only simple service improvement but also organizational and business changes. In this study, we aimed to develop a model for measuring the digital transformation of KISTI, Korea's representative science and technology information service organization. KISTI has already carried out BPR work for digital transformation and borrowed the concept of a maturity model. However, in BPR, there is no method to measure the result. Therefore, in this paper, we developed an index to measure digital transformation based on the maturity model. Indicator development was carried out in two ways: model development and evaluation. Cases for model construction were made through a comprehensive review of existing KISTI and various domestic and foreign cases. The models before verification were technology (37), data (45), strategy (18), organization (36), and (social)influence (14) based on the major categories. After verification using confirmatory factor analysis, the model is classified as technology (20 / 17 indicators dropped), data (36 / 9 indicators dropped), strategy (18 / maintenance), organization(30 / 6 indicators dropped), and (social) influence (13 indicators / 1 indicator dropped).

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.87-94
• /
• 2019

Through a press release dated July 17, 2018, the Anti-Corruption and Civil Rights Commission recommended that the National Fire Agency develop preventive measures against fire in the "Indoor Archery Ground" and "Room Escape Café" etc., which were originally excluded from the category of "Publicly Used Establishments." This study developed the hierarchy of domains and indicators of measurement for fire risk assessment of the new business of publicly used establishments through the Delphi Method. It analyzed the goodness of fit scores (over 3.00) and secured an average score of 4.25. Using AHP analysis, the ratio of consistency for the domains of measurement of fire risk assessment was found to be 4.0%, which was lower than CR ≤ 0.1 (10%). The consistency of subsequent measurement indicators were distributed in the range of 0.1%~3.6%, and they were identified as being commonly consistent. The indicators of measurement appeared as follows in order of importance and priority: Type of Internal Passage of Establishment and Evacuation Capacity of Exit (0.316), Control of Ignition Source (0.141), Inherent Risk (0.106), Appropriateness and Adaptiveness of Fire Detection System (0.097), Control of Inflammables/Combustibles (0.084), Guides and Facilities helping Evacuation (0.075), Fire Resistant Structure and Finishing Materials (0.060), Compartmentalization and Emergency Exit (0.049), Risk of Fire Expansion (0.046), and Appropriateness and Adaptiveness of Fire Extinguishing Facilities (0.026). The findings of this study are expected to be expansively used as data for future research on the development of fire risk assessment indicators.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.71-81
• /
• 2013

Measuring the distance between benchmarks placed on a volcano tens to thousands of meters apart can sometimes pinpoint where and when magma is rising toward the surface. Rising magma will sometimes push overlying rocks upward or shove them aside. In either case, one part of the volcano may actually move horizontally relative to another part from as little as a few millimeters to as much as several tens of meters. The challenge in measuring such changes with an electronic distance meter is putting benchmarks in the right places and making frequent measurements between pairs of benchmarks. An electronic distance meter is an instrument that both sends and receives an electromagnetic signal. Depending on the distance between the EDM and reflector, the wavelength of the returned signal will be out of phase with the transmitted signal. The instrument compares the phase of the transmitted and received signals and measures the phase difference electronically. There is a wide range of EDM capabilities in range and precision, but for volcano monitoring purposes, short-range (less than 10 km) to medium-range (less than 50 km) EDM's are typically used. Short-range EDM's transmit and receive the near visible infrared part of the electromagnetic spectrum for measuring distances with an accuracy of about 5 mm.

• Korean Journal of Social Welfare
• /
• v.38
• /
• pp.206-233
• /
• 1999

The purpose of this paper is to suggest a scientific evaluation criteria for integration of person with disabilities by developing and measuring the index and indicator of disability integration. Disability integration index will be expressed in a simple number to represent the current situation which will summarize the level of integration of persons with disabilities from the perspective of outcome. Disability integration index is composed of four indicators-social attitude toward person disability, physical environment, participation in society expressed by employment and education, and social institution. Observation research was conducted to measure first two indicators of social attitude and physical environment while existing statistics and data were analyzed for other two of participation in society and social institution. The result of this study showed that disability integration index of Korea was 0.4832. Therefore this paper comes to conclude that the level of integration in Korea approaches to 48 percent which is half of ideal integration. However, this study has its limitations in selection of indicators and index formula which in turn must be followed by next studies.

• Explosives and Blasting
• /
• v.33 no.4
• /
• pp.14-24
• /
• 2015

We conducted test blasting in 3 sites to identify the effect on safety of the earth retaining wall by near blasting vibration. As a test result, we confirm that underground structures(earth anchor et al.) are relatively safer than surface structures as the underground vibration is 10~52% of surface vibration at a same distance. We derived surface and underground vibration prediction equations by regression analysis of measured 3 sites' surface and underground vibration PPV. Also we calculated minimum separation distance by blasting pattern about underground and surface curing concrete. Unless any discontinuity which are unsafe on the earth retaining wall appear, blasting work using under 2.4kg per delay is not meaningful to the earth retaining wall's safety as the result of measuring near blasting vibration, confirming change the earth retaining wall's instrument, and observation of structural deformation.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.717-724
• /
• 2009

The most important issue for successful deployment of IPTV service is the service quality. In this paper, we first choose critical quality metrics belonging to each layer of IPTV service transmission architecture and then analyze the relation between the quality parameters. For this purpose, we implement a test network that emulates the most practical environment in which IPTV service is provided and repeat measurements on the test network for the chosen metrics. Based on the analysis result, it is shown that packet losses have greater effect on the video quality of IPTV service comparing to delay and jitter.