• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.188-189
• /
• 2000

원자력 산업에서는 레이저진동측정기와 같은 원격/비접촉 측정기술이 많이 사용된다. 가동 중인 연구용 원자로의 핵연료 진동측정 같은 경우도 이러한 원격측정기술이 요구되고 있으나, 측정 대상체가 유동하는 유체 안에 있으므로 입사한 레이저의 파면이 변형되어 레이저진동측정기의 적용이 어렵다. 적응광학계(adaptive optics system; 또는 능동광학계)는 유동 층에서 변형된 파면을 파면측정 센서로 측정하고, 변형거울(deformable mirror)등의 파면보정 장치를 사용하여 파면을 보정하는 기술이다. 본 연구에서는 Shack-Hartmann 파면측정센서를 개발하고, 변형거울과 파면측정센서를 컴퓨터에 연결하여 레이저 파면의 왜곡상태를 폐회로(closed-loop)로 보정하는 장치를 개발하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2079-2081
• /
• 2003

현재 산업화 사회가 가속됨에 따라 인체에 유해한 물질들이 발생한다. 그 중에서 VOC(Volatile Organic Component)는 인체에 치명적인 해를 일으키는 물질이다. 본 논문은 MOS(Metal Oxide Semiconductor) 센서를 이용하여 인체에 치명적인 유해 물질인 VOC를 측정하였다. 현재 VOC의 측정은 GC(Gas Chromatograph)를 이용하는데 이는 측정 시간이 길며 숙련된 측정자에 의해서만 측정이 가능하고 그 분석이 가능하다. 그러나 MOS 센서를 이용하면 숙련되지 않은 측정자도 측정이 가능하며 인공신경망을 이용하여 그 분석을 함으로서 누구나 쉽게 분석이 가능하고 실시간으로 측정이 가능하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.470-470
• /
• 2023

하천 및 저수지의 수량자료 수집을 위해 부자식 또는 레이더식 수위계 등의 계측기를 이용하여 수위의 변화를 측정한다. 그러나, 수량 모니터링을 위해 설치되는 계측기와 유지관리를 위한 인력소모 비용의 이유로 일부 지역에서만 제한적으로 수행되고 있어 정확한 수문 해석에 한계가 있다. 이에 본 연구에서는 저가의 센싱장비와 라즈베리파이를 활용한 ICT 기술을 수량 모니터링분야에 적용하여 수위 모니터링 기술을 개발하고자 한다. 라즈베리파이(Raspberry Pi 3 B Model)는 오픈소스 기반의 초소형 컴퓨터로 여러 센서를 연결하여 다양한 수문 인자(토양수분, 온도, 수위 등)들을 측정할 수 있으며, 통신 모듈이 기본 내장되어 있어 통신망 구축을 통해 측정데이터를 데이터베이스에 저장할 수 있다. 수위센서(eTape)와 초음파센서를 연결하여 실제 하천 유량 모니터링에 활용되고 있는 부자식 수위계 장비와 비교 분석을 통해 활용 가능성을 검증하고자 하였다. 검증방법은 인공강우실험을 위해 설치된 플륨관에 수위센서(eTape)와 초음파센서를 부착하여 기존 운영중인 부자식 수위계와 비교하였다. 부자식 수위계의 측정결과와 두 센서의 상관관계를 분석한 결과 결정계수(R²)가 0.94 이상으로 나타났다. 분석결과와 같이 기존 고가의 수위 관측장비들을 대체하여 저가의 센서 기반 모니터링 장비들의 실용화가 가능할 것이라 판단된다. 향후 연구에서는 다양한 센서(수위, 초음파, 카메라 등)를 이용하여 농업용수 물수지 분석에 활용할 계획이다. 농업용수는 수자원 총량 중 차지하는 비율이 높음에도 불구하고 정량적 데이터가 부족한 실정이며, 지역별 공급 특성이 다양하여 이를 계량화하기 위해서는 다수의 계측기가 필요하다. 따라서, 본 연구에서 개발중인 센서를 활용하여 물순환 과정의 정량적인 계측을 통해 농업용수의 효율적인 관리 및 농업용수의 하천기여도 평가 자료로 활용될 수 있을 것으로 판단된다.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.104-109
• /
• 2009

In order to apply FBG(Fiber Bragg Grating) sensor as one of reliable sensors in the commercial railway structure, the reliability of FBG sensor in the mechanical strength viewpoint have to be confirmed and the maximum strain should surpass the fracture strain of the host structure to measure the measurands until the host structures fail. In this paper, several factors that influence the mechanical failure strength of fiber Bragg grating sensors were analyzed. A set-up for dynamic tensile testing of optical glass fibers with fiber Bragg gratings was made. To increase the FBG failure strength, techniques relying on the H2 loading treatment and stripping methods were established and testified as a result of the tensile strength test of optical fibers.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.18-20
• /
• 2013

센서 응용 프로그램을 테스트하는 보편화된 방법은 테스트 보드에 센서를 직접 연결시켜 테스팅 환경의 센서값으로만 응용프로그램을 테스팅 하는 것이다. 본 논문에서는 스마트 센서 응용 프로그램 테스트하기 위해 기존의 방법의 문제점을 소개하였다. 그리고, 문제점을 보완하기 위한 효율적인 테스팅 방법인 센서측정값 생성기를 제안하였다. 센서측정값 생성기는 센서선택, 센서특성화, 출력패턴정의, 통신방식이라는 4단계 과정으로 각 센서의 특성에 맞게 실제와 유사한 테스팅 환경을 제공하고 보다 효율적이고 신뢰성 높은 테스트 결과를 만들어 낼 수 있다.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.52-61
• /
• 2013

In wireless sensor networks, the geographical positioning scheme is one of core technologies for sensor applications such as disaster monitoring and environment monitoring. For this reason, studies on range-free positioning schemes have been actively progressing. The density probability scheme based on central limit theorem and normal distribution was proposed to improve the location accuracy in non-uniform sensor network environments. The density probability scheme measures the final positions of unknown nodes by estimating distance through the sensor node communication. However, it has a problem that all of the neighboring nodes have the same 1-hop distance. In this paper, we propose an efficient sensor positioning scheme that overcomes this problem. The proposed scheme performs the second positioning step through the sensing range control after estimating the 1-hop distance of each node in order to minimize the estimation error. Our experimental results show that our proposed scheme improves the accuracy of sensor positioning by about 9% over the density probability scheme and by about 48% over the DV-HOP scheme.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.147-151
• /
• 2001

An optical fiber sensor is capable of nondestructive measurement of a structure and it has an advantage of the immunity to electromagnetic interference because light is not affected by electromagnetic wave. In addition, if optical fibers are buried in an object like a concrete, this sensor tan analyze defects and physical status of the object without disassembling it. Especially, the fiber Bragg grating sensor is a promising optical fiber sensor capable of nondestructive test of such an object. A fiber Bragg grating has the characteristics of reflecting or blotting light of a specific wavelength. If we apply physical quantity like strain to the fiber Bragg grating, the center wavelength of the reflected light is shifted and then we can find the physical quantity applied to the fiber Bragg grating by measuring the center wavelength shift of the reflected light. The fiber Bragg grating sensor capable ot static and dynamic strain measurement is being used in health-monitoring of buildings, structures, etc. Recently increasing is interest in dynamic strain measurement inevitable to the civil structures such as roads and bridges. In this study we implemented the optical fiber sensor system which can measure dynamic strain at multiple points using Fabry-Perot wavelength demodulation. And we measured the static and dynamic strain using this sensor system with a test structure(cantilever). Measurement results were similar to those obtained with the conventional electrical measurement methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.279-282
• /
• 2017

Kinect depth sensor, a depth camera developed by Microsoft as a natural user interface for game appeared as a very useful tool in computer vision field. In this paper, due to kinect's depth sensor and its high frame rate, we developed a distance measurement system using Kinect camera to test it for unmanned vehicles which need vision systems to perceive the surrounding environment like human do in order to detect objects in their path. Therefore, kinect depth sensor is used to detect objects in its field of view and enhance the distance measurement system from objects to the vision sensor. Detected object is identified in accuracy way to determine if it is a real object or a pixel nose to reduce the processing time by ignoring pixels which are not a part of a real object. Using depth segmentation techniques along with Open CV library for image processing, we can identify present objects within Kinect camera's field of view and measure the distance from them to the sensor. Tests show promising results that this system can be used as well for autonomous vehicles equipped with low-cost range sensor, Kinect camera, for further processing depending on the application type when they reach a certain distance far from detected objects.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.73-78
• /
• 2017

In this paper, the fire risk using a bimetal type thermometer for construction installation is presented. Because construction equipment is used widely in the field and the site is exposed to explosions and fire by combustible gas or fume, strong restrictions on the structure and usage are applied. Moreover, the risk of fire increases as precise temperature measurements are poorly conducted via an inner temperature sensor inside construction furnace. Therefore, this paper presents the results of structural analysis of a bimetal temperature sensor which is used widely in construction installation and temperature measurement experiments relative to the material property of the target object. The results revealed the relatively precise temperature of the liquid object, whereas those of the gas and solid object showed a lower temperature compared to the real temperature. This shows that bimetal-type temperature sensor is more suitable for measuring a liquid state object than measuring a gas or solid state object.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.397-403
• /
• 2002

Urine glucose monitoring system is a self-monitoring system that display the glucose level by non-invasive measurement method. In this paper, We developed a noninvasive urine glucose monitoring system that improved defects of urine glucose measurement with a colorimeter method and invasive blood glucose measurement method. This system consist of bio-chemical sensor for urine glucose measurements, signal detecting part, digital and signal analysis part, display part and power supplying part. The developed bio-chemical sensor for the measurement of urine glucose has good reproducibility, convenience of handing and can be mass-produced with cheap price. To evaluate the performance of the developed system, We performed the evaluation of confidence about the detection of glucose level by a comparison between a standard instrument in measuring glucose level and the developed system using standard glucose solutions mixed with urine. Standard error was 2.85282 from the evaluation of confidence based on regression analysis. Also, In analysis of S.D(standard deviation) and C.V(coefficient of validation) that are important parameters to evaluate system using bio-chemical sensor, S.D was 10% which falls under clinically valid value, 15%, and C.V was under 5%. Consequently from the above results, compared to blood glucose measurement, the system performance is satisfactory.