• Title/Summary/Keyword: 측정값

Search Result 14,473, Processing Time 0.044 seconds

A Sequence Similarity Algorithm Irrelevant to Sequence Length (서열의 길이에 무관한 유사도 측정 알고리즘)

  • Kim, Jae-Kwang;Lee, Jee-Hyong
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2008.04a
    • /
    • pp.13-16
    • /
    • 2008
  • Dynamic Programming (DP)을 이용한 서열 비교 알고리즘은 DNA, RNA, 단백질 서열의 비교와 프로그래밍 소스 코드 유사도를 측정하는 곳 등에 널리 사용되어 왔다. 이 알고리즘은 DP를 이용하여 행렬을 구성한 후, 행렬의 가장 마지막 생성 값을 이용해 두 서열의 유사도를 측정하는 방법이다. 그러나 이 알고리즘에서 사용하는 마지막 생성 값은 비교 서열이 길이에 따라 크게 좌우되기 때문에 다양한 서열들의 유사도를 알아내기에는 부적합하다. 본 논문에서는 서열의 길이에 무관한 유사도 측정 (S2) 알고리즘을 제안한다. 제안된 알고리즘을 이용하면 비교 서열의 길이에 영향을 받지 않고 정당한 서열 비교를 할 수 있다. 제안된 알고리즘의 검증을 위해 본 논문에서는 프로그램 소스 코드의 유사도 측정을 수행한다.

  • PDF

Design of the surface characteristics measurement system for objective expression of texture (질감의 객관적 표현을 위한 표면 특성 측정장치의 설계)

  • 문지성;권영화;이주영;강대임
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1997.11a
    • /
    • pp.16-21
    • /
    • 1997
  • 인간은 접촉을 통해 여러 가지 정보를 받아들이고 있으며 피부와 물체표면과의 접촉에 의한 느낌은 인간의 감성을 유발하는 중요한 요소이다. 이와 같은 질감에 대한 느낌을 측정하여 객관적인 값으로 표현된다면 의류, 종이, 자동차등 대부분의 산업분야에서 제풀을 디자인하는데 응용이 가능할 것이다. 인간이 촉감을 느낄 때의 Mechanism과 촉감에 가장 큰 관계를 가지는 마찰력에 대해 조사하여, 이를 응용한 표면 특성 측정장치를 설계 제작하였다. 또한 인간이 제품의 표면질감을 느낄 때의 주관적인 표현을 직물을 대상으로 하여 설문조사를 통해 대표형용사로 표현하도록 하였다. 이러한 주관적인 질감 표현과 같은 직물을 표면 특성 측정장치를 이용하여 얻어낸 측정값과 상관관계를 조사하여 질감의 객관적인 표현을 연구하는데 이용하였다.

  • PDF

A study on the effectiveness to satellite communications due to Asian Dust (황사에 의하여 위성통신에 미치는 영향분석)

  • 홍완표;김학섭;전영신
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2004.05b
    • /
    • pp.55-58
    • /
    • 2004
  • To analysis on the degradation of the satellite communication signal due to Asian dust that was appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency band of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in lcheon, Korea. The measured results were compared to the measurement values of PM10 and OPC that were measured by the Korea Meteorological Administration.

  • PDF

Tap inductor boost converter for electric bicycle using AC sensor (AC 센서를 사용하는 전기자전거용 탭 인덕터 부스트 컨버터)

  • Lee, Chun-Gu;Park, Joung-Hu;Bae, Hyun-Su
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.291-292
    • /
    • 2019
  • 본 논문에서는 AC 센서를 사용하는 전기자전거용 탭 인덕터 부스트 컨버터 시스템을 제안한다. 일반적으로 인덕터 전류 측정을 위해서는 DC 센서를 사용한다. 왜냐하면, AC 센서를 사용하여서 인덕터 평균 전류 크기를 측정하면 평균 전류 크기가 0이기 때문에 실효성이 있는 평균 전류 크기를 측정할 수 없다. 하지만 탭 인덕터 부스트 컨버터의 경우에는 부스트 컨버터 스위치가 닫혔을 때와 열렸을 때의 인덕터값이 달라져서 AC 센서로 측정되는 인덕터 전류 크기가 0이 아니고 AC 센서 측정값과 탭 인덕터의 턴 비를 이를 이용하여 간단한 계산을 통해 인덕터에 흐르는 평균 입력 전류 크기를 계산할 수 있다. 알 수 있다. 제안되는 시스템은 프로토타입 하드웨어로 설계되었으며 본문의 실험을 통해서 검증되었다.

  • PDF

The Effect of Using Two Different Type of Dose Calibrators on In Vivo Standard Uptake Value of FDG PET (FDG 사용 시 Dose Calibrator에 따른 SUV에 미치는 영향)

  • Park, Young-Jae;Bang, Seong-Ae;Lee, Seung-Min;Kim, Sang-Un;Ko, Gil-Man;Lee, Kyung-Jae;Lee, In-Won
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.14 no.1
    • /
    • pp.115-121
    • /
    • 2010
  • Purpose: The purpose of this study is to measure F-18 FDG with two different types of dose calibrator measuring radionuclide and radioactivity and investigate the effect of F-18 FDG on SUV (Standard Uptake Value) in human body. Materials and Methods: Two different dose calibrators used in this study are CRC-15 Dual PET (Capintec) and CRC-15R (Capintec). Inject 1 mL, 2 mL, 3 mL of F-18 FDG into three 2 mL syringes, respectively, and measure initial radioactivity from each dose calibrator. Then measure and record radioactivity at 30 minute interval for 270 minutes. According to the initial radioactivity, linearity between decay factor driven from radioactive decay formula and the values measured by dose calibrator have been analyzed by simple linear regression. Fine linear regression line optimizing values measured with CRC-15 through regression analysis on the basis of the volume of which the measured value is close to the most ideal one in CRC-15 Dual PET. Create ROI on lung, liver, and region part of 50 persons who has taken PET/CT test, applying values from linear regression equation, and find SUV. We have also performed paired t-test to examine statistically significant difference in the radioactivity measured with CRC-15 Dual PET, CRC-15R and its SUV. Results: Regression analysis of radioactivity measured with CRC-15 Dual PET and CRC-15R shows results as follows: in the case 1 mL, the r statistic representing correlation was 0.9999 and linear regression equation was y=1.0345x+0.2601; in 2 mL case, r=0.9999, linear regression equation y=1.0226x+0.1669; in 3 mL case, r=0.9999, linear regression equation y=1.0094x+0.1577. Based on the linear regression equation from each volume, t-test results show significant difference in SUV of ROI in lung, liver, region part in all three case. P-values in each case are as follows: in 1 mL case, lung, liver and region (p<0.0001); in 2 mL case, lung (p<0.002), liver and region (p<0.0001); in 3 mL case, lung (p<0.044), liver and region (p<0.0001). Conclusion: Radioactivity measured with CRC-15 Dual PET, CRC-15R, dose calibrator for F-18 FDG test, do not show difference correlation, while these values infer that SUV has significant differences in the aspect of uptake in human body. Therefore, it is necessary to consider the difference of SUV in human body when using these dose calibrator.

  • PDF

A Study on the Arching Effect due to Embankment Piles (성토지지말뚝에 의한 아칭효과 연구)

  • Lee, Seung-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.7
    • /
    • pp.375-381
    • /
    • 2017
  • A full-scale field test was conducted to investigate the arching effect of an embankment pile. The arching effect calculated from the test results was compared with theoretical values. Measurements obtained from a load cell and an earth pressure cell during the field test reflected the arching effect of the embankment pile well. The arching effect measured by load cells for an embankment height of 3m or less was smaller than the theoretical value with the assumption of plain strain.The measured effect for a height of 4 m or more was larger than the theoretical value. In contrast to the consistent decrease of the theoretical arching effect, the arching effect obtained from the field test shows continually increasing trends. The arching effects calculated from the earth pressure cells were greater than those from the theory under the plain strain assumption, but the trend was similar to the theoretical one. The arching effects measured by the earth pressure cells an embankment heights of 2, 3, 4, 5, and 6 m were 1.05, 1.23, 1.29, 1.28, and 1.29 times greater than those from the theory under the assumption of plain strain. The arching effects from the field test were much greater than those from the theory under the installation of a pile grid.

Reproducibility Evaluation of Shear Wave Elastography According to the Depth of the Simulated Lesion in Breast Ultrasonography (유방초음파 검사에서 모조 병소의 깊이에 따른 전단파 탄성초음파의 재현성 평가)

  • Jin-Hee Kim;In-Soo Kim;Cheol-Min Jeon;Jae-Bok Han
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.6
    • /
    • pp.919-927
    • /
    • 2023
  • Elastography utilizes the fact that the tissue of a malignant tumor is harder than that of a benign tumor and increases the specificity of diagnosis according to the elastic modulus of the tumor, helping to reduce unnecessary biopsies. However, the reliability of elastography can be influenced by the equipment used and the examiner's skills. In this study, the researchers analyzed the reproducibility of elastography by evaluating phantom images when measuring the elasticity values repeatedly. Phantoms were created using silicone and gelatin with different levels of stiffness, and they were inserted at varying depths from the surface. The elasticity values were measured using shear wave elastography. The study aimed to determine whether the reproducibility of elasticity values remains consistent depending on the stiffness and depth of the lesions. The experimental results showed that there was no statistically significant correlation between the elasticity values obtained through shear wave elastography and the depth or stiffness of the lesions. However, in the lesions with the lowest stiffness, the elasticity values were statistically significant (p<0.001) and showed a high correlation with the depth of the lesions. Although there were variations in the measured elasticity values based on the differences in lesion stiffness and depth, these differences did not significantly impact the diagnosis. Therefore, shear wave elastography remains a reliable diagnostic method, and it is suggested that it can be helpful in the diagnosis of breast lesions.

Type 347 stainless steel 피로시험 데이터의 통계처리

  • Min, Gi-Deuk;Kim, Seon-Jin
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2009.11a
    • /
    • pp.35.2-35.2
    • /
    • 2009
  • 최근 전세계적으로 저탄소, 녹색성장으로 인하여 원자력발전이 주목받고 있다. 또한 에너지의 고효율로 인한 발전소의 설비가 대형화가 됨에 따라 발전소의 수명평가와 건전성평가가 중요해지고 있다. 일반적으로 구조물 내에 존재하는 균열의 크기와 형상을 파악하여 피로균열전파속도를 평가함으로써 건전성평가를 확인하고 있다. 그리고 고온, 고압에서의 피로균열전파속도는직류전위차 (Direct Current Potential Drop : DCPD)법을 사용하고 있다. DCPD법은 균열의 정밀한 측정방법으로써 측정시 오차가 발생하기 때문에 ASTM에서 제시된 incremental polynomial 법을 권고하고 있다. 따라서 본 연구에서는 피로균열전파전파속도의통계적처리를 통해서 합리적인 곡선을 구하여 건전성평가에 활용하고자 한다. 실험에 사용된 시편은 두께 5mm, 폭 25.4mm CT시편을 사용하였으며, 1mm의 예비균열을 주었다. 그리고 실험온도는 상온에서 실시 하였으며, 주파수는 10Hz를 주었다. 그리고 DCPD 측정을 위해 5A의 전류를 주었으며, 이때 측정된 전압값을 ASTM에 제시된 관계식에넣어 균열길이로 환산하였으며, 데이터처리는 ASTM에 제시된 incremental polynomial법을 기본적으로 사용하였다. 또한 ASTM에 제시된 2n+1을 이용하여 데이터의 수 n을 1~7 까지 변화를 주어 3~15 point 까지 데이터를 처리하여곡선을 제시하였다. 분석결과 $R^2$값이 1을 기준으로 했을 때 3~7 point 까지는큰 차이를 보이지 않았지만 9-point 이후부터는 $R^2$ 감소함을 알 수 있었다. 또한 적용된 데이터의수에 따라 피로군열전파속도 곡선에서 측정된 Paris law의 n값과 C 값은 큰차이를 보이지 않았다.

  • PDF

25년 장기간 동작된 태양전지 모듈의 열화모드 및 열화메커니즘 분석

  • Park, No-Chang;Han, Chang-Un;Kim, Dong-Hwan
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2011.10a
    • /
    • pp.34.2-34.2
    • /
    • 2011
  • 본 연구에서는 1986년에 국내 섬 지역에 설치된 태양전지 모듈을 대상으로 전기적 특성값의 열화 및 열화 원인에 대한 분석을 실시하였다. 태양전지 모듈의 초기 최대 출력값은 50 W였고, 5인치 단결정 실리콘 태양전지 36개로 구성되어 있었다. 첫째로, 육안 검사를 통해서 태양전지 모듈의 열화 현상을 관찰하였다. 태양전지 모듈의 절연성은 IEC 61215의 기준으로 측정하였다. 태양전지 모듈의 전기적 특성평가를 통해서 최대 출력값의 변화량을 측정하였고, EL(Electroluminescence) 측정을 통해서 태양전지의 열화를 분석하였다. 이를 통해 분석된 주요 열화 모드는 봉지재 (Encapsulant)의 변색(Discoloration) 및 박리(Delamination)현상이었다. 봉지재의 변색된 부분 및 변색되지 않은 부분의 태양광 반사도를 측정한 결과 변색된 부위의 반사도가 증가한 것을 확인하였다. 두번째로 최대 출력전압을 태양전지 모듈에 인가한 상태에서 태양전지 각각의 온도를 T.C (Thermocouple)을 이용하여 측정하였고, 이를 통해서 태양전지의 열화와 온도와의 관계를 분석하였다. 마지막으로 태양전지 모듈의 단면분석을 통해서 봉지재의 박리현상 및 리본와이어의 솔더 접합계면을 관찰하였다. 또한, 봉지재를 제거한 후에 SEM&EDX를 통해서 리본와이어 및 금속전극의 부식현상을 분석하였다.

  • PDF

Magneto-electronic Properties of $Si_{ l-x}Mn_x$ Thin Films Grown by MBE (MBE로 성장한 $Si_{ l-x}Mn_x$ 박막의 전자기적 특성 연구)

  • Kim, Jong-Hwan;Ryu, Sang-Su;Kim, Hang-Yeom;Kwon, Dang;Cho, Yeong-Mi;Lim, Yeong-Eun
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.03a
    • /
    • pp.100-100
    • /
    • 2003
  • 본 연구에서는 Si에 Mn을 첨가한 Si$_{l-x}$Mn$_{x}$ 박막의 전기적 및 자기적 특성을 조사하였다. Si$_{l-x}$Mn$_{x}$ 박막은 MBE(Molecular Beam Epitaxy)를 이용하여 native oxide층을 제거하지 않은 (100)Si wafer 위에 성장하였다. Substrate 온도는 50$0^{\circ}C$로 하였으며, 첨가한 Mn 농도는 20%에서부터 80%까지였다. 전기적 특성은 Hall, 4-point probe를 통하여 측정하였고, 자기적 특성은 VSM, FMR, SQUID을 이용하여 측정하였다. 상 분석은 XRD, TEM을 이용하여 관찰하였다 Si$_{l-x}$Mn$_{x}$ 박막은 Hall 측정 결과 상온에서 P-type carrier를 가지며, 비저항은 반도체 영역인 7.6$\times$$10^{-4}$~4.2$\times$$10^{-2}$(ohm-cm)의 값을 가진다. 상온 VSM, 측정결과 Mn의 양이 52% 첨가 시 포화 자화 값이 가장 높은 40emu/cc를 가지며, Mn의 양이 증가할수록 포화 자화 값이 증가하다 다시 감소하는 경향을 가진다. FMR, SQUID 측정에서도 이러한 경향을 확인할 수 있었다 특히, SQUID 분석 결과 두 개 이상의 자성 상이 존재하는 것을 관찰할 수 있었다. XRD, TEM 관찰결과, Si$_{l-x}$Mn$_{x}$은 poly crystal로 성장하였으며, Mn 농도에 따라 여러 상들이 관찰되었다.따라 여러 상들이 관찰되었다.

  • PDF