• Title/Summary/Keyword: 측위신호 결합방법

Search Result 11, Processing Time 0.03 seconds

Detection Performance for Combining Multiband GNSS Signals in Broadband Jamming Environments (광대역 전파방해환경에서 다중대역 GNSS 신호결합에 따른 검파성능)

  • Yoo, Seung-Soo;Kim, Sun-Yong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.5C
    • /
    • pp.444-452
    • /
    • 2012
  • The detection performances, in this paper, are derived according to combination of the multiband GNSS signals in broadband jamming environments. The detection probabilities depending on the false alarm probabilities are derived and presented via Monte-Carlo simulation under the assumption as follows: the GNSS signals are perfectly orthogonal and simultaneously received by the receiver using non-coherent correlation.

High Accuracy of Indoor Hybrid Positioning Method based on Mobile Device (모바일 단말 기반 고정밀 실내 융합 측위 방법)

  • Lee, J.K.;So, W.S.;Lee, J.S.;Yoo, S.J.
    • Electronics and Telecommunications Trends
    • /
    • v.29 no.6
    • /
    • pp.113-125
    • /
    • 2014
  • 최근 모바일 단말 기술의 발전과 무선망의 성능 향상에 따른 다양한 서비스가 제공되고 있는 추세이며, 위치정보인식시스템과 결합된 서비스에 많은 관심이 높아졌다. 본고에서는 GPS(Global Positioning System)의 신호가 미치지 못하는 건물의 실내환경에 적합한 경로 안내서비스 및 지하시설물 안내 등 초정밀 실내 측위 서비스를 제공하기 위한 융합 측위 방안을 제안한다. 융합 측위 방안은 실내외 연속 측위를 위해 실외에서는 GPS를 이용하고 실내환경에서는 WLAN 기반의 측위 전용 AP(Access Point)를 이용, 전파신호의 LoS(Line of Sight)를 확보하여 측위하고 전파음영지역에서는 스마트폰의 가속도, 자이로센서 등 여러 가지 관성센서를 활용하여 PDR(Pedestrian Dead Reckoning) 알고리즘 등을 적용하여 측위한다. 또한 측위 정확도 향상 및 오차를 줄이기 위한 방법으로 LSE(Least Squire Estimation) 및 EKF(Extended Kalman Filter), KNN(K-Neighbor Node)/MSSM(Maximum Signal Strength Model) Algorithm 등 다양한 융합 측위 알고리즘을 적용하여 실내환경에 적합한 최적의 초정밀 실내 측위 서비스를 제공한다.

  • PDF

Radio Beacon-based Seamless Indoor and Outdoor Positioning for Personal Navigation Systems (개인 휴대용 네비게이션을 위한 라디오 비컨 기반 실내외 연속측위 시스템)

  • Kim, Sang-Kyoon;Jang, Yoon-Ho;Bae, Sang-Jun;Kwak, Kyung-Sup
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.4
    • /
    • pp.84-92
    • /
    • 2009
  • In this paper, using the received signal strength of radio beacon such as Wi-Fi, Bluetooth, CDMA and GPS signal from the satellite, we propose the system of positioning which considered indoor and outdoor based on the Place Lab. Conventional Place Lab utilize the various positioning parameters to estimate the indoor location. However, this conventional system has limitations with respect to the range and efficiency of usage. Therefore, we defined the converged model of multisensor data and re-organized the Place Lab to overcome the limitation of a conventional system. Proposed system uses the radio beacon signal and GPS signal together to estimate the location. Furthermore, it provides the seamless PNS service with many mobile devices because this system realized by the OSGi bundle. This proposed system has evaluated the performance with SAMSUNG T*OMNIA SCH-M490 smart phone and the result shows the system is able to support the PNS service.

  • PDF

A Scheme for Improvement of Positioning Accuracy Based on BSS in Jamming Environments (재밍 환경에서 BSS 기반 측위 정확도 향상 기법)

  • Cha, Gyeong Hyeon;Song, Yu Chan;Hwang, Yu Min;Sang, Lee Jae;Kim, Jin Young;Shin, Yoan
    • Journal of Satellite, Information and Communications
    • /
    • v.10 no.4
    • /
    • pp.58-63
    • /
    • 2015
  • Due to GPS signal's vulnerability of jamming attack, various enhancement techniques are needed. Among variety of techniques, we focused on GPS receiver's anti-jamming techniques. There are many anti-jamming methods at GPS receivers which include filtering methods in time domain, frequency domain and space domain. However, these methods are ineffective to signals, which include both jamming and noise. To solve the problem, this paper proposes a jamming separation scheme by using a BSS method in a jamming environment. As separated GPS signals include noise after the jamming separation method, it is difficult to receive accurate GPS signals. For this reason, this paper also proposes a wavelet de-noising method to effectively eliminate noise. Experimental results of this paper are based on a real field test data of an integrated GPS/QZSS/Wi-Fi positioning system. At the end, the simulation result demonstrates its superiority by showing improved positioning accuracy.

Accuracy Analysis of Positioning Supplementary Control Point with the RTK-GPS and RTK-GPS/GLONASS (RTK-GPS와 RTK-GPS/GLONASS에 의한 도근점 측위의 정확도 분석)

  • Park, Woon-Yong;Kim, Jin-Soo;Kim, Yong-Bo;Back, Ki-Suk
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.11 no.1 s.24
    • /
    • pp.61-69
    • /
    • 2003
  • The study is the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen for evaluation of accuracy of satellite positioning. First, suggest the validity of RTK-GPS, RTK-GPS/GLONASS and compared the accuracy with that of the classical surveying method. As a result. In urban area, in case of real time kinematic positioning when compare between the method combined by GPS/GLONASS and by GPS alone the result of GPS/GLONASS - combination more excellent. And in open ana positioning combined GPS/GLONASS was more excellent than GPS alone in both real time differential and real time kinematic. So, RTK-GPS, RTK-GPS/GLONASS contribute to the digital mapping of Basic map and the existed map necessary for the building of PBLIS to the computerization of cadastral map in the effectiveness in time and in cost and hereafter the combined GPS/TS is expected to contribute to the development of NGIS, Re-investigation of a land register, the execution drawing on site.

  • PDF

Accuracy Analysis of Positioning Supplementary Control Point with the Combined GPS/GLONASS and TS (GPS/GLONASS와 TS 결합에 의한 도근점 측위의 정확도 분석)

  • 박운용;곽두호;김용보;백기석
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.21 no.3
    • /
    • pp.199-207
    • /
    • 2003
  • In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

Design and Implementation of Multi-Sensor-based Vehicle Localization and Tracking System (멀티센서 기반 차량 위치인식 시스템의 설계 및 구현)

  • Jang, Yoon-Ho;Nam, Sang-Kyoon;Bae, Sang-Jun;Sung, Tae-Kyung;Kwak, Kyung-Sup
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.6
    • /
    • pp.121-130
    • /
    • 2009
  • In this paper, Gaussian probability distribution model based multi-sensor data fusion algorithm is proposed for a vehicular location awareness system. Conventional vehicular location awareness systems are operated by GPS (Global Positioning System). However, the conventional system is not working in the indoor of building or urban area where the receiver is difficult to receive the signal from satellites. A method which is combined GPS and UWB (Ultra Wide-Band) has developed to improve this problem. However, vehicular is difficult to receive seamless location information since the measurement systems by both GPS and UWB convert the vehicle's movement information separately at each sensor. In this paper, normalized probability distribution model based Hybrid UWB/GPS is proposed by utilizing GPS location data and UWB sensor data. Therefore the proposed system provides information with seamless and location flexible properties. The proposed system tested by Ubisense and Asen GPS in the $12m{\times}8m$ outdoor environments. As a result, the proposed system has improved performance for accurateness and connection ability between devices to support various CNS (Car Navigation System).

  • PDF

A Kalman filter with sensor fusion for indoor position estimation (실내 측위 추정을 위한 센서 융합과 결합된 칼만 필터)

  • Janghoon Yang
    • Journal of Advanced Navigation Technology
    • /
    • v.25 no.6
    • /
    • pp.441-449
    • /
    • 2021
  • With advances in autonomous vehicles, there is a growing demand for more accurate position estimation. Especially, this is a case for a moving robot for the indoor operation which necessitates the higher accuracy in position estimation when the robot is required to execute the task at a predestined location. Thus, a method for improving the position estimation which is applicable to both the fixed and the moving object is proposed. The proposed method exploits the initial position estimation from Bluetooth beacon signals as observation signals. Then, it estimates the gravitational acceleration applied to each axis in an inertial frame coordinate through computing roll and pitch angles and combining them with magnetometer measurements to compute yaw angle. Finally, it refines the control inputs for an object with motion dynamics by computing acceleration on each axis, which is used for improving the performance of Kalman filter. The experimental assessment of the proposed algorithm shows that it improves the position estimation accuracy in comparison to a conventional Kalman filter in terms of average error distance at both the fixed and moving states.

Analysis of the Protection Ratio of GPS System in the Presence of RF Interference Radiated by UWB System (UWB 시스템의 간섭 신호에 대한 GPS 보호 비 분석)

  • Cho, In-Kyoung;Shim, Yong-Sup;Lee, Il-Kyoo;Cho, Hyun-Mook;Hong, Hyun-Jin
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.2
    • /
    • pp.208-213
    • /
    • 2011
  • This paper analyzes potential interference effects of Ultra Wide Band(UWB) on Global Positioning System(GPS) which is providing safety service. For the interference analysis, positioning error method is used to determine the minimum protection distance to meet positioning error of 2.5 m below and Minimum Coupling Loss(MCL) method is used to determine the required protection ratio(I/N) from the protection distance of UWB transmitter and GPS receiver to meet positioning error of 2.5 m below. In a result, the minimum protection distance to meet positioning error of 2.5 m below was about 10 m and the protection ratio to meet positioning error 2.5 m below was -20 dB. The protection ratio proposed in this paper is the same value of the protection ratio of safety service proposed by ITU-R. The obtained protection ratio can be used for the protection standard of domestic GPS system for the safe of life service.

Improving GPS Vertical Error Using Barometric Altimeter (기압 고도계를 이용한 GPS 수직오차 개선)

  • Kim, La-Woo;Choi, Kwang-Ho;Lim, Joon-Hoo;Yoo, Won-Jae;Lee, Hyung-Keun
    • Journal of Advanced Navigation Technology
    • /
    • v.20 no.1
    • /
    • pp.29-36
    • /
    • 2016
  • Accuracy of GPS (global positioning system) deteriorates dramatically or positioning is impossible in urban area occasionally since high-rise buildings and elevated roads make the reception of navigation signal very difficult so that number of visible satellites decreases. In these cases, vertical error usually becomes much larger than the horizontal error due to the intrinsic geometry of GPS satellites. To obtain more accurate and reliable height information, this paper proposes a hybrid method that combines GPS and a low-cost barometric altimeter. In the proposed method, the sea-level pressure and the sea-surface temperature are applied to the output of the altimeter. Next, the difference between the ellipsoid and the geoid is compensated. Finally, a simple Kalman filter combines the compensated barometric altitude and the GPS height. By static and car experiments, performance of the proposed method is evaluated. By the experiment results, it can be seen that the proposed method improves the altitude accuracy considerably.