• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1135-1139
• /
• 2007

청계천 복원의 효과가 하천의 형상, 종 조성, 종 다양성 변화의 유연성 및 환경 개선 효과 측면에서 검토되었다. 복원된 청계천은 하천의 종단 및 횡단 형상에서 모두 낮은 자연성을 나타내었다. 종 조성은 부분적으로 자연하천과 유사한 조성을 보였으나 전반적으로 낮은 자연성을 보였다. 종 다양성은 비교적 낮았지만 복원의 역사를 고려할 때 양호한 것으로 평가되었다. 하류와 수변에서는 홍수 후 많은 변화를 가져와 자연으로 회귀할 가능성도 보였지만 상류와 홍수터 이상에서는 변화의 유연성이 낮아 자연으로 회귀하는데 많은 시간이 소요될 것으로 평가되었다. 인공위성 영상 분석 결과, 복원된 청계천은 기온 완화 효과를 나타내었다. 그 밖에 복원된 청계천은 그 주변의 분산된 녹지를 연결하여 그린네트워크를 구축하고자 할 때 핵심적 역할을 할 것으로 기대되어 경관생태적 측면에서의 환경개선효과도 기대되었다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.117-120
• /
• 2000

본 논문에서는 2매의 2차원 얼굴영상으로부터 이들을 합성하여 3차원 얼굴의 가상형상을 복원한다. 여기서 2매의 2차원 얼굴영상은 정면과 측면 영상을 사용한다. 우선 임의의 일반 얼굴에 대한 기준모델을 설정하고, 이 모델에서, 얼굴형상의 특징을 표현하는 귀, 2개의 눈, 코 및 입 부분에 집중적으로 특징점을 규정하고, 그 외에 이마 및 턱 부분에도 특징 점을 규정하여 그 위치좌표를 저장해 둔다. 그 후 정면영상의 좌 우측에 측면영상을 대칭적으로 접속하고 영상의 기하변환 방법을 적용하여 점차적으로 합성한다. 이때 나타나는 합성부분에 색상 및 명도의 차를 제거하기 위해 선형보간법을 적용하여 자연스런 3차원 가상얼굴을 구현하게 된다. 그 결과 불특정 얼굴형상도 3차원으로 구현할 수 있음을 확인하였다.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.1
• /
• pp.23-28
• /
• 2017

Shape from focus (SFF) is a technique used to reconstruct 3D shape of objects from a sequence of images obtained at different focus settings of the lens. In this paper, a new shape from focus method for 3D reconstruction of microscopic objects is described, which is based on gradient operator in Mathematical Morphology. Conventionally, in SFF methods, a single focus measure is used for measuring the focus quality. Due to the complex shape and texture of microscopic objects, single measure based operators are not sufficient, so we propose morphological operators with multi-structuring elements for computing the focus values. Finally, an optimal focus measure is obtained by combining the response of all focus measures. The experimental results showed that the proposed algorithm has provided more accurate depth maps than the existing methods in terms of three-dimensional shape recovery.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.1
• /
• pp.63-72
• /
• 1989

The influences of the wideness of pram in designing aftbody of container vessels are investigated. The large transverse KM value of the wide pram aftbody is likely to be regarded as having exellent cargo loading capacity. However the remarkable stability loss under the certain wave conditions, unfavorable situation for structural arrangement and the possibilities of poor vibration and speed-power performances should be considered in case of adopting the wide pram aftbody.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.71-79
• /
• 2002

A new rapid prototyping process, Variable Lamination Manufacturing using a 4-axis-controlled hotwire cutter and expandable polystyrene foam sheet as a laminating material of the part (VLM-S), has been developed to reduce building time and to improve the surface finish of parts. The objective of this study is to reconstruct the surface of the original 3D CAD model in order to generate mid-slice data using the advancing front technique. The generation of 3D layers by a 4 axis-controlled hot-wire cutter requires a completely different procedure to generate toolpath data unlike the conventional RP CAD systems. The cutting path data for VLM-S are created by VLM-Slicer, which is a special CAD/CAM software with automatic generation of 3D toolpath. For the conventional sheet type system like LOM, the STL file would be sliced into 2D data only. However, because of using the thick layers and a sloping edge with the firstorder approximation between the top and bottom layers, VLM-Slicer requires surface reconstruction, mid-slice, and the toolpath data generation as well as 2D slicing. Surface reconstruction demands the connection between the two neighboring cross-sectional contours using the triangular facets. VLM-S employs thick layers with finite thickness, so that surface reconstruction is necessary to obtain a sloping angle of a side surface and the point data at a half of the sheet thickness. In the process of the toolpath data generation the surface reconstruction algorithm is expected to minimize the error between the ruled surface and the original parts..

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.16-21
• /
• 2001

In this paper a virtual form of 3 dimensional face is synthesized from the two sheets of 2 dimensional photographs In this case two sheets of 2D face photographs, the front and the side photographs are used First of all a standard model for a general face is created and from this model the feature points which represents a construction of face are densely defined on part of ears. eyes, a nose and a lip but the other parts. for example, forehead, chin and hair are roughly determined because of flat region or the less individual points. Thereafter the side photograph is connected symmetrically on the left and right sides of the front image and it is gradually synthesized by use of affine transformation method. In order to remove the difference of color and brightness from the junction part, a linear interpolation method is used. As a result it is confirmed that the proposed model which general model of a face can be obtain the 3D virtual image of the individual face.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.377-387
• /
• 2014

This study mainly treats a new type of the bracing friction damper system, which is able to minimize structural damage under earthquake loads. The slotted bolt holes are placed on the shear faying surfaces with an intention to dissipate considerable amount of friction energy. The superelastic shape memory alloy (SMA) wire strands are installed crossly between two plates for the purpose of enhancing recentering force that are able to reduce permanent deformation occurring at the friction damper system. The smart recentering friction damper system proposed in this study can be expected to reduce repair cost as compared to the conventional damper system because the proposed system mitigates the inter-story drift of the entire frame structure. The response mechanism of the proposed damper system is firstly investigated in this study, and then numerical analyses are performed on the component spring models calibrated to the experimental results. Based on the numerical analysis results, the seismic performance of the recentering friction damper system with respect to recentering capability and energy dissipation are investigated before suggesting optimal design methodology. Finally, nonlinear dynamic analyses are conducted by using the frame models designed with the proposed damper systems so as to verify superior performance to the existing damper systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.766-766
• /
• 2012

최근 진행되고 있는 자연형 하천 조성사업과 관련하여 하천 복원 계획 및 실무에 있어 우선적으로 고려되어야 할 사항은 여러 가지가 있지만, 그 중에서 유역의 복합적인 요인(기후, 지형특성, 수리 수문특성, 식생특성, 유사 특성 등)들에 의하여 영향을 받게 되는 하천의 지형형태학적 측면의 경우에는, 안정 하도 형성에 직접적인 영향을 미치게 되므로 계획의 예비조사 단계서부터 충분한 검토가 이루어져야 함에도 불구하고, 국내에서는 하천 지형형태학적인 측면을 고려한 하천 복원의 연구는 아주 미미한 것이 사실이다. 자연하천 조성에 있어서 획일적으로 직선화된 하천보다 사행화를 유도함으로써 얻어지는 장점들이 더 많지만, 하천설계기준 등에서 제시하고 있는 사행화에 대한 정확한 지침이 부재하여 설계자의 판단에 의하여 사행화를 유도하는 경우가 대부분이다. 사행현상은 유심의 변화가 이루어지기 때문에 전단면에 걸친 수심의 유지가 어렵고, 취수구의 기능저하, 제방의 파괴, 국소세굴에 따른 하천재해 등의 문제가 발생하기도 한다. 자연 상태의 하천형상은 대부분 호우로 인한 홍수로 인하여 자연스럽게 만들어지게 되며, 대부분 사행하천의 형태를 띠게 된다. 자연적으로 형성된 사행하천은 하천 정비시 경제적인 측면을 고려하여 직선화로 계획하는 경우가 많으며, 하천 주변 지형과 토지이용 등의 제약 조건 등으로 인하여 만곡구간을 그대로 두고 하천설계를 계획하는 경우도 있다. 그러나 경제적인 측면만을 고려하여 하천을 직선화하는 것은 상류부 홍수를 하류부로 전가시켜 하류 홍수피해를 가중시키는 결과를 초래하므로 바람직하지 않을 뿐만 아니라 직선화된 수로에서는 하천의 생태계가 제대로 이루어지지 않으므로 하천은 만곡구간을 갖는 것이 바람직하다. 본 연구에서는 자연하천 조성시 하천의 사행화를 유도할 수 있는 방안으로 호안 공법의 적용을 통한 사행화 유도 방법을 제안하였으며, 길이 20m, 폭 2m, 높이 1m의 크기를 갖는 개수로 장치를 이용하여 수리모형실험을 실시하였고, 이동상 실험을 통하여 호안 공법의 배열에 따른 사행화 영향 정도를 분석하였다. 또한, 소프트 백과 같은 유연한 소재뿐만 아니라 돌이나 돌망태와 같은 강성 소재에 대한 사행화 영향을 검토함으로써 다양한 호안기법을 통한 영향범위를 제시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.76-95
• /
• 2011

After dismantled, Mireuksajiseoktap(Stone pagoda of Mireuksa Templesite) is being in the stage of restoration design. Now, different ways - producing restoration model, a 3 dimension simulation - have been requested to make more detailed and clearer restoration design prior to confirmation of its restoration design and actual restoration carry-out. This thesis proposes the way to build the detailed model for better restoration plan using extensively-used Reverse Engineering technique and Rapid Prototyping. It also introduces each stage such as a 3-dimension actual measurement, building database, a 3-dimension simulation etc., to build a desirable model. On the top of that, this thesis reveals that after dismantled, MIruksaji stone pagoda's interior and exterior were not constructed into pieces but wholeness, so that its looks can be grasped in more virtually and clearly. Secondly, this thesis makes a 3-dimension study on the 2-dimension design possible by acquiring basic materials about a 3-dimension design. Thirdly, the individual feature of each member like the change of member location can be comprehended, considering comparing analysis and joint condition of member. Lastly, in the structural perspective this thesis can be used as reference materials for structure reinforcement design by grasping destructed aspects of stone pagoda and weak points of the structure. In dismantlement-repair and restoration work of cultural properties that require delicate attention and exactness, there may be evitable errors on time and space in building reinforcement and restoration design based on a 2-dimension plan. Especially, the more complicate and bigger the subject is, the more difficult an analysis about the status quo and its delicate design are. A series of pre-review, based on the 3-dimension data according to actual measurement, can be one of the effective way to minimize the possibility that errors about time - space happen by building more delicate plan and resolving difficulties.