• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.206-214
• /
• 1988

To improve the surface waviness in the peripheral milling, the feedrate is controlled so that the cutting force measured in the normal direction to the workpiece is constant. A discrete time first order model between the feedrate and the tool deflection is derived for the control. It has been shown by the analysis that the tool deflection is directly related to the feedrate and largely affects the surface waviness during cutting. The experimental results shown that the surface waviness is drastically improved by the proposed methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.122-130
• /
• 2018

The International Maritime Organization has enacted mandatory performance standards for protective coatings (PSPC), and as a result, shipyards must perform 2R or 3-pass milling on the edges of color plates. However, manual milling could result in many problems in terms of work environment and productivity. Therefore, it is necessary to develop an edge milling automation system that can satisfy the regulations. In this study, a basic design for an edge milling automation system was developed for standard color plates, and the machining process was established by applying shape recognition and a machining path generation algorithm. In addition, operating software was developed, and suitable milling conditions were derived based on the results of a milling test. The results could be used to build an automation system that meets the PSPC requirements and improve productivity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.66-70
• /
• 2010

Using two piezoelectric materials orthogonally arranged, 2-dimensional(2D) vibration in a excitation workpiece table was generated. In this study, micro milling using high frequency 2D vibration was proposed, whose locus of cutting tool is combined with original trochoid locus of milling tool and 2D elliptical locus of excitation table. From the cutting results of 2D vibrational micro milling of nickel alloy, it was observed that the machining quality and the roughness of machined surface were enhanced compared to conventional milling in a side cutting whose immersion ration is relatively low, whereas there was little betterment in a slot cutting.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.63-72
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes a feedrate override Adaptive Control Constraint (ACC) system was developed. The feedrate override function was accomplished through a development of programmable machine controller (PMC) interface technique on the NC controller, Nonlinear model of the cutting process was linearized as an adaptive model with a time varying process parameter. An integral type estimator was introduced for on-line estimation of the cutting process parameter, Zero order hold digital control methodology which uses pole-assignment concept for tuning of PI controllers was applied for the ACC system. Performance of the ACC system wsa confirmed on the vertical machining center equipped with fanuc OMC through a large amount of experiment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.24-28
• /
• 2012

In this paper, the high speed milling characteristics of Al6061 was studied. A gantry type milling & tapping center was developed for this study. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the surface roughness is relative to the cutting conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.303-303
• /
• 2010

국제적으로 에너지 고갈에 대한 문제점과 환경적은 측면에서 대체 에너지 개발에 대한 관심이 뜨거워 지고 있는 지금 그중에서 에너지 하베스팅에 대한 연구가 활발히 이루어지고 있다 에너지 하베스팅 이란 "자연에서 버려지는 에너지를 수확하여 저장하는 기술" 이며 에너지 하베스팅 방법으로는 태양광을 이용한 태양광발전, 기계적인 운동과 전자기적 현상을 이용한 발전 등이 있다. 태양광발전 같은 경우에 흐린날 이나 실내에서는 사용 할 수 없는 반면 날씨와 관계없는 진동의 기계적 에너지를 전기적 에너지로 변환 할 수 있는 압전 세라믹스를 이용한 에너지 하베스팅의 연구가 이루어 지고 있다. 에너지 하베스팅을 하기 위한 여러 가지 type의 소자가 있지만, 본 논문에서는 무연 압전 세라믹스를 이용한 cantilever type의 실험을 진행하였으며 에너지 하베스팅 시스템에서 핵심이 되는 것은 압전 세라믹스의 성능이므로 비교적 높은 $d_{33}$ 와 $g_{33}$를 가진 소자를 선정하였다. 압전 세라믹스를 이용한 에너지 하베스팅의 장점으로 소형 경량으로 이용할 수 있는 범의가 넓으며 진동 또는 충격을 효과적인 방법으로 에너지로 변환할수 있다. 실험 과정으로 KNNS에 CuO를 첨가하여 1차 밀링후 $Ag_2O$를 첨가하여 2차밀링 하여 $900^{\circ}C$ 하소 cantilever type으로 성형 후 $1080^{\circ}C$ 소성을 하여 세라믹스를 제작하여 그에대한 발전 특성을 조사하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.9-15
• /
• 2020

Carbon fiber reinforced plastic (CFRP) is a composite material useful in the aerospace and automotive industries because of its light weight and high strength. In this study, side milling tests were carried out using AlCrN, diamond-like carbon (DLC), and diamond-coated end mills. Additionally, a comparison study according to the cobalt content was conducted. Thus, tool wear and surface quality were examined and the influences of using coating and a certain material type were analyzed. The surface roughness of the machined surface was measured. Microscope observations revealed that the CFRP fiber at the machined surface was not damaged even at a cutting distance of 3,000 mm. Therefore, this study showed that the diamond-coated end mill containing 6% cobalt is appropriate for milling CFRP.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.41-41
• /
• 2012

고급 스포츠웨어와 이너웨어 등에 많이 사용되고 있는 나일론/폴리우레탄 혼방제품은 염색에 있어서 Grin-through 현상, 인공피혁의 염료 이염 현상 등 많은 문제들이 존재한다. 본 연구의 나일론과 폴리우레탄 복합소재에서 나타나는 염색거동을 고찰하고 분석하여, 폴리우레탄 복합소재의 염색성을 개선하기 위하여 실시하였다. 폴리우레탄 복합소재는 해성분이 용출되지 않은 나일론 초극세사 소재에 폴리우레탄 수지를 함침하여 인공피혁과 같은 느낌을 주도록 직접 제조하였다. 제조된 폴리우레탄 함침 나일론 초극세사 소재의 해성분을 용출하였고, Red 색상의 밀링형 산성 염료, 함금속 염료와 반응성 염료에 따라 달라지는 염색특성 및 세탁 견뢰도 등을 고찰하였다. 본 연구를 통하여 다음과 같은 실험결과를 얻을 수 있었다. 나일론 초극세사와 폴리우레탄 수지를 준비하여 습식공정을 통해 인공피혁을 제조한 함침 소재를 알칼리 감량하였고, 감량률은 15~17% 정도로서 대부분의 해성분이 용출됨을 확인하였다. PPG와 PTMG로 구성된 폴리올을 기반으로 한 폴리우레탄 함침 피혁과 PTMG를 단독으로 사용한 함침 피혁의 염색성을 비교한 결과, PPG+PTMG 타입이 더 우수한 염색성을 나타내었다. 특히 밀링 타입과 함금속 타입 염료의 경우는 거의 2배 이상의 흡진율과 겉보기 색농도를 나타내었다. 한편, 반응성 염료의 경우는 두 종류의 폴리우레탄 필름에 거의 염착되지 않았기 때문에 앞으로의 염색실험에서 제외하였다. 견뢰도 측면에서는 각각의 피염물의 등급은 거의 유사하게 나타남을 확인하였다. 이상과 같은 결과로부터, 인공피혁 제조시 PPG+PTMG 타입의 폴리우레탄 수지를 사용하여 함침시 더 높은 색강도와 염착률을 얻을 수 있음을 알았다. 사용하는 염료의 종류를 좀 더 다양하게 하여 실험을 실시하고 폴리우레탄의 물성 및 분석 등의 추가적인 연구가 진행된다면, 인공피혁의 염색시에 발생하는 여러 가지 문제점들을 해결할 수 있을 것이다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.171-176
• /
• 2012

So far, carbide insert production technology was carried out using a diamond grinding wheel. This production technology has problem that raise production costs and decrease in productivity. The SIDE PRESS method to solve this problem have been developed. In this paper, the machining characteristics of lateral chip breaker turning inserts produced by the SIDE PRESS method was studied. The cutting force and the resulting surface roughness were measured at various cutting conditions. The experimental results indicate that the chip breaker inserts of three-dimensional geometry is the best cutting performance.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.171-181
• /
• 2020

Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology.