• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.112-119
• /
• 2022

Recently, as carbon neutrality has been important factor in the construction industry, many studies have been conducted on the high-volume fly ash concrete. High volume fly ash concrete(HVFC) is usually made by replacing more than 50% of cement with fly ash. However, HVFC has a disadvantage of low compressive strength in early age. To overcome this shortcoming of HVFC, improve this, interest in techonolgy using nanomaterials is increasing. Nano silica is expected to improve the early age strength of HVFC as a pozzolanic material. This study investigated the effect of nano silica on the early hydration reaction and microstructure of HVFC. The early hydration reaction of HFVC was analyzed through setting time, isothermal calorimeter, compressive strength and thermal weight analysis. In addition, the microstructure of HVFC was measured by mercury intrusion porosimetry. From the test results, it was confirmed that nano silica increased the early age strength and improve the microstructure of HVFC.

• Clean Technology
• /
• v.16 no.2
• /
• pp.145-152
• /
• 2010

Various technical methods are applied for removing water from the water-retaining media, and the energy efficiency is the main concern in those methods. The electroosmotic process is studied as an efficient way for dewatering. An experimental electroosmotic reactor is designed and used for evaluating the effects of operational variables. The operational variables such as the electrical fields and the structure of water-retaining medias were studied. Three different shapes of polarized electric fields in ranges of 0-100 V/cm and 0-10 kHz are used as the source of electric voltage. The effect of electroosmotic process with respect to the structural variation is estimated by filling the electroosmotic reactor with the glass beads in 0.18 mm, 0.35 mm and 1.2 mm in diameters. 6% of water removal is obtained in the simulating electroosmotic reactor of glass beads. The estimated energy consumption in the simulating electroosmotic was 330~490 cal/g-water.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.49-58
• /
• 2007

Numerical experiments using a distinct element code (PFC3D) were carried out for the analysis of grout-material transfer in soil layers and also for the analysis of increase in mechanical strength after permeation grouting. For rapid analysis, up-scaling analysis in length scale was adopted, and the following observations were made from the numerical experiments. Firstly, the relative size of grout material with respect to the in situ soil particles controlled the transfer distance of the grout particles. When the size of grout particle was 0.2 to 0.25 times of the in situ soil particles, clogging of pore spaces among the in situ soil particles occurred, resulting in restricted propagation of grout particles. It was also found that there was a threshold value in the size of grout particle. Below the threshold value, the transfer distance of the grout particle did not increase with the decrease of particle size of the grout material. Secondly, the increase in cohesion and internal friction angle was observed in the numerical specimen with grouting treatment, but not with the untreated specimen.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.17-25
• /
• 2008

Permeable reactive barriers (PRBs) technology can be applied to contaminated groundwater remediation. It is necessary to select adequate reactive material according to contaminant characterization. In groundwater. In this research, the reaction between reactive material and heavy metal contaminants was estimated through batch test. Reactive material was slag, which has been produced in Gwangyang power plant, and heavy metal contaminants were cadmium, lead and copper. Batch test consisted of two testes: 1) sorption equilibrium test and 2) sorption kinetic test. Sorption equilibrium test was performed for estimating slag sorption capacity against contaminants. And sorption kinetic test was performed for slag sorption rate with contaminants species, contaminants initial concentration and sulfate. Sorption capacity and sorption rate were affected by contaminant species. Sorption rate increased with increasing initial concentration in lead and copper but decreased with increasing initial concentration in cadmium. Sorption rate increased in existing sulfate. In low concentration, film diffusion was domain mechanism, and in high concentration, particle diffusion was domain mechanism.

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.284-288
• /
• 1993

Low temperature magnetic properties and crystal structures of melt-spun $Sm_{2}Co_{7}B_{3}$ compound were characterized. The magnetic measurements in the temperature range 77 K~450 K indicated that a spin-reorientation took place at about 150~160 K. A large anisotropy was observed(Ha=135 kOe at 300 K, 725 kOe at 77 K) for $Sm_{2}Co_{7}B_{3}$ although the magnetic moment is rather low. The crystal structure of the $Sm_{2}Co_{7}B_{3}$ compound was analyzed in detail by Rietveld analysis of powder diffraction pattern, and it was revealed that B(4h) atoms are not placed in the Sm(2e) layer but in between the Sm(2e) and Co($6i_{1}$) layers.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.214-218
• /
• 1994

$Y_{3}Fe_{5}O_{12}$ based garnet films(thin or thick) offer a great promise for the application of microwave communication components. We investigated the magnetic and crystallographic preperties of $Y_{3}Fe_{5}O_{12}$ thick films prepared by KrF eximer laser ablation of a stoichiometric garnet target. It was possible to obtain almost epitaxially oriented films on $Al_{2}O_{3}$(1102) plane. Although the crystalline quality depends on substrate temperature and $O_{2}$ partial pressure used($Po_{2}$), 4.1m thick films of $4{\pi}M_{s}=1300$ Gauss and $H_{c}=37.5$ Oe were obtained at the substrate temperature of $700^{\circ}C$ with the $Po_{2}$ of 100 mTorr after annealing the as-deposited films at $700^{\circ}C$ for 2 hours. These films are expected to be used for magnetostatic spin wave filters at narrow bandwidth frequency.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.181-188
• /
• 2023

In a typical living space, windows are directly exposed to the external noise environment. The best way to reduce outside noise is to block it from the outside, not the inside. Exterior blinds for blocking sunlight are commercialized in various ways. However, it has not yet been actively utilized in Korea. In the previous study, an experiment was conducted in an accredited laboratory to verify the sound insulation performance of an external motorized blind manufactured for shading. And it was verified that there is a sound insulation performance of 6 dBA compared to the reduction performance of a general window. In this study, we tried to confirm the reduction performance by applying the sound insulation performance of external electric blinds to windows in actual living spaces. In addition, an improvement plan was sought to increase the effective noise reduction performance. As a result of the measurement, the reduction performance of the external motorized blind itself was insufficient at the level of 1 dBA to 3 dBA. However, additional reduction performance of the 2 dBA level was confirmed by filling the gap between the blind slits.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.130-130
• /
• 2020

수자원장기종합계획에 따르면 전국 지하수위는 지하수 이용의 지속적인 증가와 도시화에 따른 지하수 함양감소 등으로 최근 매년 조금씩 감소하고 있다. 특히, 환경부의 지하수조사연보(2018)에 따르면 남한강하류 중권역은 한강수계 전체 지하수 사용량의 약 34.5 %를 차지하고 있는 것으로 분석되었으며, 2009년에 비하여 2017년의 지하수위는 1.4 m의 감소 되었다. 본 연구는 한강유역에서 지하수 개발밀도가 높은 이천시에 위치해 있는 복하천 유역(303.8㎢)을 대상으로 지하수위 감소에 따른 기저유량 변동특성을 파악하기 위하여 SWAT-MODFLOW(Soil And Water Assessment Tool-MODFLOW)을 적용하고자 한다. SWAT-MODFLOW는 준분포형 장기유출모형 SWAT과 3차원 분포형 지하수 모의가 가능한 MODFLOW를 연계한 모형이며, MODFLOW만으로는 해결할 수 없는 일별 지하수 함양량의 분포와 SWAT만으로는 계산 불가능했던 지하수위의 시공간 분포를 보완하여 재생함으로써 두 모형의 한계를 극복한 모델이다. SWAT의 검보정 결과로서는 RMSE는 10.6 mm/day, NSE는 0.72, R²는 0.69 효율이 나타났으나, 지하수 유출이 보정되지 않아 MODFLOW의 입력자료인 토양두께(m), 수리전도도(m/day), 비저류량(1/m), 비산출율을 토양통에 따라 분류한 해외논문(Steven et.al 2005) 자료를 산정하여 SWAT-MODFLOW 두모형을 연계한 프로그램에 입력하여 지하수 유출을 보완하였고 SWAT과 SWAT-MDFLOW 지하수 유출량 비교뿐만이 아닌 SWAT-MODFLOW의 출력자료인 지하수위 및 지하수 충진량을 검토하였다.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.53-57
• /
• 2008

In order to survey the contents of ethyl carbamate in alcoholic beverages, GC/MS-SIM method was used after extraction with dichloromethane in solid phase extract cartridge contained alcoholic beverages. In the applied GC/MS-SIM method, the values of recoveries and relative standard deviation were ranged from 85.2 % to 87.9 % and from 0.7 % to 1.9 %, the limit of detection and quantification were $2{\mu}g/kg$ and $10{\mu}g/kg$. Depending on alcoholic beverage kinds, the levels were variable and the average level was $194{\mu}g/kg$ for liquor, $105{\mu}g/kg$ for fruit wine, $62{\mu}g/kg$ distilled spirit, $28{\mu}g/kg$ for sake, $15{\mu}g/kg$ for yakju, $12{\mu}g/kg$ for other alcohol beverages, ND for soju, respectively.