• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.564-570
• /
• 2000

The waste FRP occured in the fabrication of SMC (sheet molding compound) bathtubs and the waste polyurethane foam occured in electronic manufacture and waste insulator were applied as a soundproof and light weight pannel in the waste FRP unsaturated polyester matrix resin composites to recycle. The effect of filler contents on the mechanical properties and interfacial phenomena of the filler and matrix on the composites was evaluated. The tensile strength of composites reached its maximum value of 82.34 MPa when the filler content was 70 wt%, and the more content of reinforcement is increased, the more tensile modulus was decreased. The flexural strength and modulus of composites, reinforced 70 wt% with filler content, were dominant compared to the other samples to 72.5 MPa, 958.4 MPa respectively. When composite of reinforced 70 wt% with filler content, it was confirmed that pull out phenomena and cracks did not occur in the interface of reinforcement and matrix resin through the SEM observation. Also, waste FRP and urethane foam were dispersed well into matrix resin as filler.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.130-135
• /
• 2010

In this study, the performance improvement of epoxy resin system had been tried by the improvement of particle size distribution and globularization of filler using polymerization method. From the results of particle size distribution measurement, the polydispersity value of reformed filler was 1.04 and that of silica flour before reformation was 2.6, it could be confirmed that the particle size uniformity of reformed filler had been improved greatly and the shape of particle was globular. Compatibility between monomer and silica was improved remarkably with the silanization pretreatment of silica flour. From the results of degree of crosslinking test, it could be confirmed that the binding structure of reformed filler was 3-dimensional net structure. And it could be also confirmed that the fluidness was improved at the casting of epoxy resin with reformed filler. From the above results, it could be concluded that the reformation of filler with the improvement of particle size distribution and globularization was very successful method to improve the performance of cast epoxy resin system.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.590-595
• /
• 1994

Kimchi packed in PP tray was stored at $10^{\circ}C$ to investigate the effect of filling ratio on the quality changes. The quality of Kimchi studied were gas composition in the package, pH, titratable acidity, color, growth of lactic acid bacteria and sensory properties. As the filling ratio increased, there was more $O_{2}$ consumption and $CO_{2}$ evolution measured. Titratable acidity and pH were not significantly affected by the filling ratio. Color change of crushed Kimchi juice was also little affected by the filling ratio. During the storage, L and b values were decreased exponentially, but a value s remained constant. The growth of lactic acid bacteria and sensory scores showed no significant difference according to the filling ratio. Therefore, the filling ratio in packaging of Kimchi seemed to have little influence on the quality changes of Kimchi.

• Composites Research
• /
• v.34 no.5
• /
• pp.330-336
• /
• 2021

Alumina powder is one of the widely used materials for industry, but there is a problem that the strength of the product changes depending on the powder packing state. To solve the above problem, previous studies have been conducted to increase the particle packing efficiency, but most of the existing studies analyzed the packing characteristics of millimeter-scale particles, so the physical properties are different from those of the micrometer scale. It is difficult to apply to the micrometer scale. In this paper, a three-step experiment was performed using a statistical method to increase packing using micrometer-scale alumina powder. First, a size combination with high packing and a mixing ratio were selected using the mixture test design method, and an appropriate excitation frequency was selected by analyzing the height change according to the frequency change in the vibration test apparatus. Finally, an alumina powder packing experiment was performed based on the experimental results mentioned above. As a result, it was confirmed that the maximum height variation was 42% higher than the maximum value of the 155 measurements performed when selecting the packing size combination. It is thought that this study will serve as basic data for processing and packing research using fine powder.

• Composites Research
• /
• v.36 no.5
• /
• pp.310-314
• /
• 2023

VaRTM(Vacuum assisted resin transfer molding) and VAP(Vacuum assisted process) processes are a type of RTM(Resin transfer molding) process, and are typical out-of-autoclave (OOA) processes that can manufacture large structures at low cost. In this paper, a resin filling test was conducted to compare the VaRTM and VAP processes, and the filling process and dimensional stability were compared. In addition, an analysis method to simulate the filling process was developed, and a dielectric sensor was used to detect the flow front of the resin, which was compared with the analysis results. From the resin filling test, the total filling time of the composite plate was measured to be 48 minutes for the VAP process and 145 minutes for the VaRTM process, and the filling time by the VAP process was reduced by about 67%. In addition, it was confirmed that the VAP process was superior to the VaRTM process in the thickness control ability and uniformity of the composite plate.

• Journal of Chest Surgery
• /
• v.38 no.12 s.257
• /
• pp.807-814
• /
• 2005

Background: Cardiopulmonary bypass is an essential process to maintain circulation for saving life during the cardiac surgery, But it is a process in which systemic inflammation was evoked inevitably because of the exposure of blood to foreign surface. The injuries to distal organs during the cardiopulmonary bypass were resulted from systemic inflammation and the disturbances of micro-circulations in the organs. We designed this study to research the effects of leukocyte depletion from pump-oxygenator priming solution on the systemic inflammation, and the micro-circulation of gastric mucosa that is suggested by the gastric mucosal $CO_{2}$ partial pressure and acidity. Material and Method: The dogs were divided into three groups according to the different pump-oxygenator priming solutions; non-hemic crystalloid solution; leukocyte-depleted homologous blood; and non leukocyte-depleted homo-logous blood. Each priming solution group contained five dogs. In all three groups, 2 hours of cardiopulmonary bypass, and 4 consecutive hours of general anesthesia was maintained on the mechanical ventilation. Each dog was evaluated for the gastric mucosal pH, $CO_{2}$ partial Pressure, arterial pH, $CO_{2}$ partial pressure, the exhaled air $CO_{2}$ partial pressure and the level of IL-8 on before the cardiopulmonary bypass, 1 hour after the cardiopulmonary bypass, 2 hours after the cardiopulmonary bypass, 2 hours after the restoration of normal circulation, and 4 hours after the restoration of normal circulation after the cardiopulmonary bypass. The levels of IL-8 were measured with ELISA (enzyme linked immunosorbent assay) technique. Result: 1. There were significant differences of gastric mucosal $CO_{2}$ partial pressure between the leukocyte-depleted homologous blood group and other two groups(vs non leukocyte-depleted homologous blood group; P=0.02, vs non-hemic crystalloid solution group; P=0,01). 2. The gastric mucosal pH of leukocyte-depleted homologous blood group was significantly different from non leukocyte-depleted homologous blood group (p=0.01). 3. The levels of IL-8, which examine the systemic inflammation, showed signi- ficantly better results in leukocyte-depleted homologous blood group and non-hemic crystalloid solution group than non leukocyte-depleted homologous blood group (p=0.01, 0.01). Conclusion: Based upon these results, we concluded that the leukocyte depletion from the pump-oxygenator priming solution has a beneficial effects in reducing systemic inflammation and the preserving of gastric mucosal micro-circulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.209-212
• /
• 2009

최근 국내에서 적용되고 있는 콘크리트 충진 FRP 스트럿은 시공성 및 경제성 면에서 매우 뛰어난 공법으로 주목 받고 있으나 그 설계 및 시공에 있어 아직도 불확실한 요소를 내포하고 있다. 특히 최근에는 PSC 박스 거더교에서 교폭을 늘리고 자중을 줄이기 위해 콘크리트 충진 FRP 스트럿을 설치하는 공법이 다수 시공되고 있다. 본 연구에서는 이러한 대상교량에 대해 현장시험을 실시하여 교량시스템에서의 콘크리트 충진 FRP 스트럿 거동을 분석하는데 목적이 있다. 특히 전자기파 간섭에 면역이 우수한 광센서인 FBG 센서를 기반으로 하는 계측을 실시하여 잡음이 없는 우수한 결과를 성공적으로 획득하였다. 그 결과 FRP 스트럿은 하중 재하 위치와 속도에 관계없이 압축응력 상태에 존재하고 있으며 횡방향 거동에 지배되고 있음을 확인하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.2
• /
• pp.46-54
• /
• 1990

본 연구에서는 에폭시수지에 무기물충진제 SiO2를I첨가하여 제작된 시편의 주파수 및 온도변화에 따른 유전 완화특성을 연구하였다. 연구결과로 제작된 복합재료의 유전특성은 충진제의 함량증가에 따라 유전율은 상당히 증가하였으나 유전손실의 변화는 거의 없었다. 이와같은 사실을 포함한 모든 특성들은 충진제입자가 에폭시 매트릭스에 견고하게 결합되어 있다는 사실과 Maxwell-Wagner의 계면분극이론으로 잘 설명될 수 있다. 제작된 복합재료에 대한 특성의 검토에서 충진제(SiO2)의 입자는 에폭시 매트릭스와 견고하게 결합되어 있으며 충진제 첨가효과는 전반적으로 유전완화세기에는 별 영향을 미치지 못하나 계면분극효과에 의한 유전율을 증가시키는 효과가 있다.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.221-224
• /
• 2013

In this study, VOC analysis method of vehicle interior materials and parts treated to visible-light responsive photocatalyst was tested by sample bag filled with air instead of nitrogen. As a result, when analyzed VOC of vehicle interior materials and parts, sample bag filled with the nitrogen was not confirmed of effect reducing VOCs and formaldehyde. However, VOCs and formaldehyde of sample bag that was filled with air instead of nitrogen, decreased significantly. Reaction effect for visible light-responsive photocatalyst was confirmed that sample bag of vehicle interior materials and parts should be filled with air instead of nitrogen.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.2
• /
• pp.77-83
• /
• 1991

In this study the investigation were carried out on short-term breakdown characteristics of the compound material dependent on change of filler quantity, ambient temperature(room temperature~[$190[^{\circ}C$]) and kinds of voltage sources for the compound materials of Bisphenol- A epoxy resins filled with $SiO_2$ particles. As the results, obtained the dielectric breakdown strength generally decrease as increasing the quantity of filler and the distance, spacing of each's particles, decrease as increasing the quantity of filler, when the distance is less than [$7.5\mu\textrm{m}$], dielectric breakdown strength is nearly constant. In the case on AC voltage dielectric strength of filled epoxy resins is stronger than nonfilled epoxy resins on temperature region more than $130[^{\circ}C$].