• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.5-11
• /
• 2014

Recently, there have been various lifeline installations constructed in the underground space of urban area due to the effective use of land. For newly installed lifelines or the management of the installed lifelines, many construction activities of excavation and backfilling are observed. Around these area, there are possibilities of collapse or excessive settlement due to the leaking of the pipe or unsatisfactory compaction of backfill material. Besides, construction costs can be saved since the on-site soils are used. The application of this liquidity filling material is not only to the lifeline installation but also to underpin the foundation under the vibrating machinery. On the evaluation of the applicability of this method to this circumstance, the strength should be investigated against the static load from the machine load as well as the vibration load from the activation of the machine. In this study, the applicability of the liquidity fill material on the foundation under the vibrating machinery is assessed via uniaxial compression and resonant column tests. The liquidity filling material consisting of the on-site soils with loess and kaolinite are tested to investigate the static and dynamic characteristics. Furthermore, the applicability of the reclaimed ash categorized as an industrial waste is evaluated for the recycle of the waste to the construction materials. The experimental results show that the shear modulus and 7 day uniaxial strength of the liquidity filling material mixed with reclaimed ash show higher than those with the on-site soils. However, the damping ratio does not show any tendency on the mixed materials.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.58-63
• /
• 1997

The experiment was done to clarify the effect of keeping material and storage temperature on weight and quality of Chinese yam (Dioscorea opposita) tuber. After the yam tubers were placed into the plastic boxes filled with different keeping materials [polyethylene (PE) film, hull, soil, sand, vermiculite], they were stored under different storage temperature(room, cold) from Oct. 15 to Mar. 15 when all the characters related to the tubers were measured. Soil or PE film as keeping materials was the lowest sound tuber rate when stored at room or cold temperature, respectively, while vermiculite was the highest in both storage temperature. When PE film and vermiculite in both storage temperatures were used as keeping materials, tuber weight were less reduced than the others. Brightness of chromaticity and moisture content were lower in room temperature storage than in cold temperature storage although the characteristics related to marketability were not affected by storage temperature. PE film had greater brightness and value 'a' of chromaticity but lower its 'b' value in the latter temperature than in the former temperature. Vermiculite, however, did the reverse result in comparison with PE film.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.177-184
• /
• 2003

매립장 내의 설치된 중간 복토층(intermediate cover)은 매립 도중 혹은 매립완료 후 종종 침출수가 하부의 침출수 집배수관으로 이동하는 것을 막아 매립장 내에 일정 침출수위를 형성시킨다. 이렇듯 중간 복토층은 침출수의 원활한 순환을 막아 매립장 바닥에 형성되어야 하는 침출수위가 중간복토층 위에 형성되도록 하는데, 이는 매립장의 구조적 안정성을 깨뜨리고 주변으로 침출수 누출을 유발시키게 된다. 본 연구에서는 이처럼 중간복토층 상부에 형성된 침출수위를 저하시키기 위하여, 폐기물 매립시 중간복토층에 투수성이 뛰어나고 역학적 강도와 화학적 내구성을 갖는 배수파일(Drain Pile)을 설치할 것을 제안하였다. 배수파일은 중간복토층 상부에 형성될 수 있는 침출수를 매립장 바닥으로 배수시키고, 침출수 집배수정으로 이송이 가능하게 만든다. 또한 배수파일은 매립장 내부에 설치됨으로써 폐기물의 자체 강성을 증가시키고, 동시에 매립장의 측방유동을 막아 구조적 안정성을 확보하는 효과도 기대할 수 있다. 실내시험을 통해 배수파일 충진재로서 굴패각의 활용가능성을 확인한 결과, 산업 폐기물인 굴패각이 침출수의 pH를 중화시키고 유해물질인 NH$_{4}$$^{+}$를 제거하는데 효과적임을 확인할 수 있었다. 한편, 실제현장의 침출수흐름을 모사하기 위해 범용 프로그램(SEEP/W)을 이용하여 매립지 내에서 배수 파일의 효과를 확인하였다.

• Conservation Science in Museum
• /
• v.21
• /
• pp.17-28
• /
• 2019

The term jinjuseon(眞珠扇), meaning literally a pearl fan, refers to a fan decorated with precious stones for use in royal wedding ceremonies. This study examined a jinjuseon housed in the National Palace Museum of Korea (NPMK) which currently lacks jeweled ornaments. In order to determine whether pearls or other gemstone settings originally ornamented the fan,the surface and composition of the gray materials remaining on the washers were investigated and the fan was compared with other artifacts decorated using similar techniques. The analysis revealed that the gray materials visible around the round rims of the washers contain tin-lead alloys. The traces of folded nails suggest that soldering was not applied. The remains of the infill observed in other artifacts with bezel settings indicate that this jinjuseon in the NPMK collection was produced using abezel setting technique wherein pearls or other gemstones were affixed by filling cylindrical bezels with tin-lead alloys.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.20-28
• /
• 2013

Recently, as the registration of vehicles increases, the utilization of the waste tires is emerging as environmental issues. Crumb rubber reproduced by scrap tires has been reused up to 25% in the construction field. The purpose of this paper is to investigate the mechanical properties of sulfur-rubber concrete (SRC) and to suggest the optimum mix design in terms of the compressive strength. Specimens were prepared with various mixing parameters: amount of sulfur, rubber, and micro-fillers. Two casting processes were also mentioned; dry process and wet process. The results mainly showed that the compressive strength of SRC decreased with an increment of rubber content. However, adding micro-filler and adjusting sulfur contents could improve the compressive strength of SRC. Optimum values of sulfur and rubber content were selected by workability and compressive strength of SRC. SRC can be applied to road constructions where high strength of concrete is not concerned, to wall panels that require low unit weight, to construction of median in highways to resist high impact load, and in sound barriers to absorb sound waves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5676-5683
• /
• 2012

In this study, numerical analysis was performed on three shapes of heat transfer plates (chevron, wave and dimple type), which are currently used as fillers of cooling towers. Results show that heat transfer rates per consumed power were larger for enhanced plates as compared with that of plain plate. Highest heat transfer coefficient was obtained for wave shape followed by chevron and dimple shape. For wave shape, cross corrugations induced significant mixing of fluids, which enhanced the heat transfer. Friction factor yielded a similar trend with the heat transfer coefficient. However, heat transfer rate and pressure drop per sheet was the largest for chevron shape, due to the largest heat transfer area per sheet.

• The Korean Journal of Petroleum Geology
• /
• v.6 no.1_2 s.7
• /
• pp.1-7
• /
• 1998

A multichannel seismic profile from the southwestern margin of the Ulleung Basin, East Sea, was analysed in detail to interpret the middle to late Miocene sequence stratigraphic evolution of the area. A regressive package is overlying a transgressive package which, in turn, is underlain by older uplifted and deformed sedimentary layers. A prominent condensed section separates the regressive and transgressive packages. The transgressive package is characterized by onlapping onto the underlying uplifted and deformed strata. The regressive package contains six prograding sequences composed of seismically resolvable lowstand, highstand, and transgressive systems tracts. Most of the depositional sequences comprise lowstand systems tracts consisting of basin-floor fan, slope fan, and prograding complex. Potential reservoirs in the regressive package are turbidite sands in basin-floor fans, channel-fill sands and overbank sand sheets in slope fans, and incised valley-fill sands in the shelf. The shallow marine sands in transgressive packages are another type of reservoir. Detailed sequence stratigraphic analysis, seismic data reprocessing, and 3-D seismic survey are suggested for the successful hydrocarbon exploration in the study area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.13-13
• /
• 2010

개요- 반도체 시장의 확대 및 소자의 고집적화와 장비의 초정밀화 등 고정도 생산성을 요구하는 현대 진공산업 시장에서는 정밀한 제품을 대량으로 생산할 수 있도록 지원할 수 있는 대용량 장비의 수요가 급증하고 있다. 서론- 하루가 다르게 발전하는 기술 경쟁 사회에서는 보다 성능이 좋은 제품을 다른 국가 또는 다른 업체와 차별화된 기술적 우위를 선점해야 한다. 본문-이에따라, 고신뢰도, 고생산성이 요구되는 진공산업 시장에 발맞추기 위한 일환으로 크라이오 펌프의 재생시간을 단축시켜 생산성 향상을 높이고, 기존의 제품에서 소비자가 느꼈던 진동을 최소로 줄일 수 있도록 저진동 제품의 설계를 통한 고객 만족의 제품을 개발함과 동시에, 맥동관 냉동기의 기술상업화를 꾀한 극저온기술 영역의 발전을 함께 도모하고자 한다. 현재까지는 국내의 일부 정부출연 연구소와 학교, 일부 특수산업 분야에서만 크라이오 펌프를 사용하고 있으나, 상업적인 설계 및 생산은 완전히 전무한 상태이다. 이는 진공시장의 잠재적인 성장을 고려할 때 국산화가 시급한 상황이다. 이러한, 상황을 고려하여 현재 기계연구원과 우성진공, 국민대학교가 맥동관 냉동기를 접목시킨 급속재생형 저진동 크라이오 펌프를 지난 2008년부터 산학연 협동으로 개발 진행 중에 있다. 크라이오 펌프의 핵심 기술은 냉동기의 효율에 있다고 볼 수 있으며, 이러한 냉동기의 효과를 높이기 위하여, 제작 공정에 진공 브레이징을 사용하여, 열교환기와 교환기 내의 충진재들과의 정확한 간극을 유지하면서 접합을 할 수 있는 환경요건을 지속적인 실험을 통해 지식을 습득하고 있다. 진공 브레이징은 외관을 아름답고 정교하게 접합할 수 있으므로, 추후 상품으로의 가치를 높일 수 있으며, 서로 다른 이종금속 간의 접합이 가능하여 열교환기의 무산소동과 스테인레스 튜브와의 접합을 가능하게 할 수 있었다. 진공브레이징에 쓰이는 모재는 여러가지가 있으며, 접합의 환경 또한 일반 용접보다 다양하므로 여러번의 실험을 통한다면, 성능은 우수하면서 외관으로 손색이 없는 개발품이 나올수 있겠다는 의견이 모아지고 있는 중이다. 본론- 아직까지는 미국의 CTI사나 일본의 ULVAC 등의 크라이오 펌프의 선진 기업에 비해 기술력이 많이 부족하기는 하지만, 아직 많은 부분이 미개발된 분야이고, 향후 후발국과의 차별을 두어 선진기술을 확보하기 위해서는 기존의 방식을 단순히 따라하는 것이 아닌 남들과 다른 원천기술의 확보가 더 필요하며, 이를 위해 부단한 노력과 시행착오를 거쳐 맥동관 냉동기형 크라이오 펌프라는 기술을 확보할 예정이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.474-482
• /
• 2016

A Kelvin foam plate - widely used in the energy and transport industries as a lightweight structural material - was examined to estimate its Young's modulus using ultrasound. An isotropic tetrakaidecahedron foam structure was designed in SolidWorks and printed using 3D printer with an ABS plastic material. The 3D printed foam structure was used to build a foam plate with a 14 mm thickness ($50mm{\times}100mm$ in size) for the ultrasonic test. The Kelvin foam plate, a significantly porous medium, was completely filled with paraffin wax to enable the ultrasound to penetrate through the porous medium. The acoustic wave velocity of the wax-filled Kelvin foam was measured using the time of flight (TOF) method. Furthermore, the elastic modulus of the Kelvin foam was estimated based on an elastic structural model developed in this study. The Young's modulus of the produced Kelvin foam was observed to be approximately 3.4% of the bulk value of the constituent material (ABS plastic). This finding is consistent with experimental and theoretical results reported by previous studies.

• Conservation Science in Museum
• /
• v.23
• /
• pp.61-70
• /
• 2020

The excavations of Tombs Nos. 2 and 3 in Daeri-ri, Uiseong within the tomb complex on Geumseongsan Mountain revealed grayish-white organic matter of an undetermined shape and use beneath some horse tack. Stereoscopic examination revealed the matter to be decayed rice bran. That the matter was found spread beneath a saddle and the findings of microscopy suggest that the rice bran was used as filler for a saddle cloth that was placed underneath the saddle to reduce the friction between the saddle and the horse. The exact shape and composition of the filler are difficult to verify due to the lack of related organic matter other than the rice bran. Further discovery of rice bran along with horse tack in different situations will provide an opportunity to more closely investigate the precise uses of the rice bran found in ancient tombs.