• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.59-64
• /
• 1998

In order to elucidate the leaching behaviour of the herbicide bentazon in soil, soil columns(5cm ID ${\times}$ 34 cm L) were packed with three different soils up to 30 cm height, followed by the treatment of [$^{14}C$]bentazon, and rice plants(Oryza sativa L.) were grown for 9 weeks on these columns, with the columns without growing rice plants as the control for comparison. The amounts of $^{14}C$ activities percolated were about 92% of the originally applied $^{14}C$ irrespective of the physicochemical properties of the soils in the absence of rice plants, whereas $21{\sim}50%$ of the originally applied $^{14}C$ was percolated in the presence of rice plants, suggesting that the amounts of $^{14}C$ leached decreased remarkably in rice-cultivating soils. Bentazon leached faster in soil with higher pH and with lower organic matter content in the presence of growing rice plants. The amounts of $^{14}CO_{2}$ evolved from the soil columns were less than 0.2% of the originally applied $^{14}C$. Smaller amounts of $^{14}C$ were translocated into shoots via roots in soils with higher organic matter content. $^{14}C$ activities distributed into the aqueous phase of the leachate collected from the soil columns increased with leaching period and by rice cultivation, whereas the physico-chemical properties of soils did not exhibit any effect. The amounts of soil-bound residues increased remarkably by cultivating rice plants.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.265-271
• /
• 2010

Desalination effects of capacitive deionization (CDI) process was studied using $TiO_2$/activated carbon electrode. In order to enhance the wettability of electrode and decrease a electrode resistance, $TiO_2$ was coated on activated carbon. By means of $TiO_2$ coating on activated carbon, electric double layer to adsorption content in CDI process was increased. It was identified from TEM, XRD, and XPS that the activated carbon based on $TiO_2$ composite was fabricated successfully by means of sol-gel method. As a results of cyclic voltammetry and impedance, it was identified that $TiO_2$/activated carbon electrode has more electric double later capacitance and less diffusion resistance than activated carbon. Also charge-discharge and ion conductivity profiles showed that the ion removal ratios of $TiO_2$/activated carbon electrode in NaCl electrolyte of $1000\;{\mu}S/cm$ more increased about 39% than that of activated carbon. In conclusion it was possible to identify that the carbon electrode coated $TiO_2$ as electrode material was more effective than raw carbon electrode.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.587-596
• /
• 2011

Ultra rapid-hardening cement is widely used for latex-modified mortar and concrete as repair and finishing material during urgent work. The purpose of this study is to evaluate the improvements in strength made to SBR cement mortars by the adding of various admixtures and by the use of different curing methods. SBR cement mortar was prepared with various polymer-cement ratios, curing conditions and admixture contents, and tested for flow, flexural and compressive strengths. From the test results, it was determined that the flow of SBR cement mortar increased with an increase in the polymer-cement ratio, and the water reducing ratio also increased. The strength of cement mortar is improved by using SBR emulsion, and is strengthened by adding metakaoline. The strength of SBR cement mortar cured in standard conditions was increased with an increase in the polymer-cement ratio, and attained the maximum strengths at polymer-cement ratios of 15 % and 10 %, respectively. The maximum strengths of SBR cement mortar are about 1.8 and 1.3 times the strengths of plain mortar, respectively. In this study, it is confirmed that the polymer-cement ratio and curing method are important factors for improving the strengths of rapid-hardening SBR cement mortar.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.168-177
• /
• 2011

The combustion test for real box of AC outdoor unit has been performed in this study in order to estimate the fire hazard in multi-system type of AC outdoor unit which is currently used for commercial use. The result showed that in test, there was explosion inside of AC outdoor unit, and flame erupted and fire spread through upper side grill. And then this fire burnt the combustibles such as wires, electronic control board, heat exchange copper plate and plastics etc inside the unit, refrigerant gas pipe was burst due to fire, and accelerated the explosion and flame eruption to outside while the refrigerant was erupting. It is found in this test that the maximum heat release rate of AC outdoor unit is 5,830 kW, the maximum internal temperature measured with infrared camera and thermocouple is $1,201^{\circ}C$, maximum ambient temperature is $881^{\circ}C$, and flame rose higher than about 5 m. It is concluded that the fire in AC outdoor unit cause fire to combustibles around the unit, and may give big damage by generating the secondary fire. It is expected that the result obtained from the test on the real object may be applied to fire realization of AC outdoor unit and estimation of fire spreading to the combustibles around in the future computer simulation.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.29-36
• /
• 1999

The leaching behaviour of $^{14}C$-paraquat in soil was investigated using soil columns (5 cm I.D. ${\times}$ 30 cm H.) parked with two soils of different physicochemical properties. $^{14}C$-Activities leached from the soil A (loam) columns with and without rice plants for 117 days were 0.42 and 0.54% of the originally applied, whereas those from the soil B (sandy loam) were 0.21 and 0.31%, respectively. $^{14}C$-Activities absorbed by rice plants from soil A and B were 3.87 and 2.79%, respectively, most of which remained in the root. Irrespective of soil types, more than 96% of the total $^{14}C$ resided in soil, mostly in the depth of $0{\sim}5$ cm. The water-extractable $^{14}C$ in soil was in the range of $6.10{\sim}9.01%$ of the total $^{14}C$ applied. The rest of $^{14}C$, which corresponds to non-extractable soil residues of [$^{14}C$]paraquat, was distributed in humic substances in the decreasing order of humin>humic acid>fulvic acid. The soil pH of the columns without rice plants increased after the leaching experiment due to the flooded anaerobic condition resulting in the reduction of the $H^{+}$ concentration, whereas that of the columns with rice plants did not increase by the offsetting effect of the acidic exudates from the roots. Low mobility of paraquat in soil strongly indicates that no contamination of ground water would be caused by paraquat residues in paddy soils under normal precipitation.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.293-296
• /
• 2003

This study was carried out to obtain physical characteristics of paper board and to measure bulge of 1,000 mL carton pak by different storage conditions. Water holding capacity of paper boards were mean of 5.6～7.0％, stiffness of machine direction(MD) was 243.3～266.7 g/cm and cross direction(CD) was 99.2～109.2 g/cm, respectively. The weight of 1,000 mL carton pak were in the range of 29.17～31.26 g. The bulge of carton paks were 6.33～6.93 mm after 7 days at 6$^{\circ}C$ storage, 7.26～8.56 mm after 7 days at 10$^{\circ}C$ and was 8.66 mm after 7 days at 10$^{\circ}C$ treated with 1 hour heat shock per day, respectively. According to this result, the bulge length of 1,000 mL carton pak was showed increased pattern upon increasing the storage temperature and the order was 6$^{\circ}C$ < l0$^{\circ}C$ < 10$^{\circ}C$＋ heat shock. To prevent bulge occurence, it was thought to control storage temperature and humidity of paper board or carton pak and to minimize their shock on cold chain system after filling process.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.70-77
• /
• 2003

The optimum conditions for the residue analysis of hydroxyanilide fungicide fenhexamid on cucumber, strawberry and grape were investigated by gas chromatography equipped with electron capture detector (GC-ECD) and the residual amount was determined by sprayed days before harvest. Each samples were extracted with acetone, filtered and concentrated to 50 mL. The concentrated extracts were transferred to dichloromethane and then thoroughly concentrated. The concentrated phase was loaded on the filtration column stuffed with silica gel and purified with acetone:hexane (5:95, 15:85, v/v) mixed solvent. The regression equation and linearity of the standard calibration curves between 0.05~2.00 ng were as follows : cucumber; Y=312.40X+10.26, $R^2=0.9996$, strawberry; Y=313.33X+5.54, $R^2=0.9998$, grape; Y=253.27X-2.23, $R^2=0.9994$. From the standard additional experiments with 0.10 mg/L and 0.40 mg/L, the average recoveries of cucumber, strawberry and grape were 94.8%, 88.1% and 93.7%, respectively and the detection limits were all the same as 0.01 mg/L. Residual amounts in crops were ranged from 0.01 to 0.58 mg/L.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.61-69
• /
• 2010

S.M.C (DSME), only operating gold mine in Korea, is processing about 160 ton/day to recover gold and more than 150 ton/day of tailing is produced. Some portion of the tailings are used as a filler material after drying, but most of them are stored on the tailing dam. As a result of chemical analysis by a fire assay method, it contained Au 1.5~2.0 g/ton and 225~300 g per day of gold is getting discarded. It is urgent to develop a technology to recover and reutilize Au. In the present study, flotation tests were carried out to recovery gold for the tailings. Test results show that products with gold grade 21.31 g/ton(Au grade) and 62.73% (Au recovery) were obtained under the optimal conditions including KAX addition rate 97.2 g/ton, frother AF 65 (0.248 l/ton) and depressant sodium silicate (4 kg/ton), it's possible to recover one of the most valuable metal Au, by re-feeding to rougher flotation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.133-140
• /
• 2016

The Ministry of Land, Infrastructure and Transport has introduced low-floor buses, which are convenient for passengers getting on and off the bus and for the handicapped. The standard bus model is 11 m long and uses compressed natural gas (CNG). However, this model has drawbacks in narrow rural road conditions such as those in farming and fishing villages and mountainous areas, as well as difficulty in refueling since CNG facilities are not readily available. In this study, running resistance values were obtained by coasting performance tests on actual roads using a Tata Daewoo LF-40 model with three different weight conditions: curb vehicle weight (CVW), half vehicle weight (HVW), and gross vehicle weight (GVW).The test methods include WHVC, NIER-06, and constant-speed driving at 60 km/h. These tests were used to measure the fuel economy of vehicles other than the target vehicles to obtain the combined fuel economy. The energy efficiency was highest in the case of CVW. In the WHVC mode, the fuel consumption rates of HVW and GVW were typically 3.5% and 12% higher than that of CVW, respectively. In constant-speed driving, the fuel efficiency of HVW was higher than that of CVW. Further research is required to analyze the exhaust gas data.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.479-485
• /
• 2010

Objectives: The aim of this study was to compare the push-out bond strengths of resin cement/fiber post systems to post space dentin using different application methods of resin cement. Materials and Methods: Thirty extracted human premolars were selected and randomly divided into 3 groups according to the technique used to place the cement into root canal: using lentulo-spiral instrument (group Lentulo), applying the cement onto the post surface (group Direct), and injecting the material using a specific elongation tip (group Elongation tip). After shaping and filling of the root canal, post space was drilled using Rely-X post drill. Rely-X fiber post was seated using Rely-X Unicem and resin cement was light polymerized. The root specimens were embedded in an acrylic resin and the specimens were sectioned perpendicularly to the long axis using a low-speed saw. Three slices per each root containing cross-sections of coronal, middle and apical part of the bonded fiber posts were obtained by sectioning. The push-out bond strength was measured using Universal Testing Machine. Specimens after bond failure were examined using operating microscope to evaluate the failure modes. Results: Push-out bond strengths were statistically influenced by the root regions. Group using the elongation tip showed significantly higher bond strength than other ways. Most failures occurred at the cement/dentin interface or in a mixed mode. Conclusions: The use of an elongation tip seems to reduce the number of imperfections within the selfadhesive cement interface compared to the techniques such as direct applying with the post and lentulospiral technique.