• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.474-475
• /
• 2018

본 논문은 충 방전 실험을 통해 온도와 C-rate에 따른 24S1P 배터리팩 내부 저항 변화와 용량을 비교분석하였다. 충전 및 방전 전류의 크기와 온도의 변화에 따라 변하는 내부 저항과 용량의 변화를 비교분석하기 위해 다양한 온도 조건($-5^{\circ}C$, $25^{\circ}C$, $55^{\circ}C$)에서 SOC별(0.04C, 1/3C) HPPC 테스트를 진행하였다. 실험을 통해 얻은 데이터로 1차 RC 등가모델을 통하여 온도와 C-rate에 따른 저항, 용량 변화를 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.53-55
• /
• 2019

리튬 이온 배터리가 소형 모바일 기기, 전기 자동차, 에너지 저장장치 등에 상용화됨에 따라서 이의 충전 상태(SOC) 추정 및 셀, 모듈의 건전성(SOH)의 예측이 배터리 사용 기기의 관리 지표로 사용되고 있다. 리튬 이온 배터리는 여러 차례의 방전으로 노화되어 기기의 요구 부하를 공급가능한지 지표로 평가되어야 한다. 정확한 SOH 추정을 위해 리튬 이온 배터리의 방전 용량 실험이 주기적으로 진행되어야 하며, 이를 통해 오프라인 기반의 SOH 추정이 가능해진다. 본 논문에서는 베이지안 회귀분석 방법을 이용하여 오프라인 SOH 추정을 진행하기 위해 방전 용량을 추정하였으며, 고출력 배터리인 18650 25R셀을 이용하여 방전 용량 추정 결과 방전 전류 1 C-rate에서 1%, 2 C-rate에서 2%의 추정 오차율을 나타냈다.

• Clean Technology
• /
• v.24 no.4
• /
• pp.332-338
• /
• 2018

Currently graphite is used as an anode active material for lithium ion battery. However, since the maximum theoretical capacity of graphite is limited to $372mA\;h\;g^{-1}$, a new anode active material is required for the development of next generation high capacity and high energy density lithium ion battery. The maximum theoretical capacity of Si is $4200mA\;h\;g^{-1}$, which is about 10 times higher than the maximum theoretical capacity of graphite. However, since the volume expansion rate is almost 400%, the irreversible capacity increases as the cycle progresses and the discharge capacity relative to the charge is remarkably reduced. In order to solve these problems, it is possible to control the particle size of the Si anode active material to reduce the mechanical stress and the volume change of the reaction phase, thereby improving the cycle characteristics. Therefore, in order to minimize the decrease of the charge / discharge capacity according to the volume expansion rate of the Si particles, the improvement of the cycle characteristics was carried out by pulverizing Si by a dry method with excellent processing time and cost. In this paper, Si is controlled to nano size using vibrating mill and the physicochemical and electrochemical characteristics of the material are measured according to experimental variables.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.515-521
• /
• 2007

Aprotinin, a serine protease inhibitor, has been used to ameliorate the inevitable consequences, including blood component injury after cardiac surgery with cardiopulmonary bypass (CPB). However, there are many arguments on its dosage or usage. We assessed whether administration of low dose of aprotinin in only priming solution has any beneficial effect or reduces its side effects on cardiac surgery. Thirty patients scheduled for elective cardiac surgery were randomly assigned to aprotinin group (n=15) which received aprotinin in priming solution (two million kallikrein inhibitory unit, KIU) and added one million KIU at 1 hour after the beginning of CPB or control group (n=15) which did not receive it. Hematological and biochemical variables, cytokines and cardiac marker levels, and postoperative outcomes were compared between two groups at before, during or after operation. Platelet count in aprotinin group was higher than that of control group at postoperative 24 hr. Activated partial thromboplastin time in aprotinin group was longer than that of control group at intensive care unit (ICU). Troponin-I level and postoperative blood loss volumes in aprotinin group were lower than those of control group at ICU. There were no significant differences between the two groups on the others. These results showed that low dosage of only priming solution during cardiac surgery with CPB reduced platelet destruction and postoperative bleeding, and attenuates myocardial damage. However, further studies need to be carried out with more population or pediatric patients for evaluating various aprotinin usage.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.55-62
• /
• 2021

In order to improve fuel economy and reduce CO2, HEV adopts ISG system as a standard. This ISG system increased the electric load that the battery had to bear, and the number of starting increased rapidly. AGM Lead Acid batteries have been developed and used, but the charging time is about three times longer as the electrolyte amount control during formation must be maintained at a higher level compared to conventional lead-acid batteries. In this study, we tried to shorten the charging time by increasing the charging efficiency through the optimization of the formation pattern. In order to optimize the Formation Pattern, 10 charging steps and 6 discharging steps were applied to 16 multi steps, and the charging current for each step was controlled, and the test was conducted under 4 conditions (21 hr, 24 hr, 27 hr, 30 hr). As a result of simultaneous application of multi-step and discharge step, it was verified that minimizing the current loss and eliminating the sudden polarization during charging contributes to the improvement of charging efficiency. As a result, it showed excellent results in reducing the charging time by about 30 % with improved charging efficiency compared to the previous one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.519-521
• /
• 2022

As appearance of diverse electric power supplies and fuel cells have been emerging, UAVs have capacity to prolong their flight missions. Nowadays, the rotary based UAVs that are commonly distributed on the open market, adapt rechargeable batteries and have around 50 centimeters in width and generally within 30 minutes in hovering flight capacities. UAV's flight time highly depends on the capacity and the weight of its batteries. To cope with the flight time, recharging methods are also being researched. their researches are mainly divided into coupled and decoupled in manner. In this article, we propose the method to refine the position more effectivly and precisely adapting QR Code and 3-D position estimation so that UAVs enable to land on the recharging system successfully.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.34-39
• /
• 2009

In this study, a needle coke was oxidized in a mixture of dilute nitric acid and sodium chlorate ($NaClO_3$) solutions and followed by heat treatment. The samples were analyzed with using XRD, FESEM, elemental analyzer, BET, and Raman spectroscopy. Double layer capacitance was measured with the charge and discharge measurements. The consisting layers of the needle coke were expanded to single phase showing only (001) diffraction peak by the acid treatment for 24 hours. The oxidized coke returned to a graphite structure appearing (002) peak after heat treatment above $200^{\circ}C$. The structure returned could be more easily accessible to the ions by the first charge, and improve the double layer capacitance at the second charge. The two-electorde cell from acid treated coke and $300^{\circ}C$ heat treatment exhibited the maximum capacitances of 32.1 F/g and 29.5 F/ml at the potential of $0{\sim}2.5\;V$.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.69-74
• /
• 1999

Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between $700^{\circ}C$ and $1300^{\circ}C$. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to $1000^{\circ}C$, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.173-179
• /
• 2020

Electric vehicles (EVs) using lithium secondary batteries (LIBs) with excellent power and long-term cycle performance are gaining interest as the successors of internal combustion engine (ICE) vehicles. However, there are few systematic researches for fast charging to satisfy customers' needs. In this study, we compare the degradation of LIB where its composition is LiNi_0.5Co_0.2Mn_0.3/Graphite with the constant current and constant power-charging method. The charging speed was set to 1C, 2C, 3C and 4C in the constant current mode and the value of constant power was calculated based on the energy at each charging speed. Therefore, by analyzing the battery degradation based on the same charging energy but different charging method; CP charging method can slow down the battery degradation at a high rate of 3C through the voltage curve, capacity retention and DC-IR. However, when the charging rate was increased by 4C or more, the deviation between the LIBs dominated the degradation than the charging method.