• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.45-55
• /
• 2006

Korean blockbusters are the works finished by the dialectic of the meeting and collision of two cultures or H. Bhabha's cultural hybridization. They represent things Korean and Western, and yet their borders are demolished to create a new complicated mixture. Typical examples are Swiri, JSA Silmido Taegukgi Whinalimyu, containing a special Korean situation of division ideology and expressing an extremely Western style of production. This thesis will study the present status of Korean film aesthetics through the cultural hybridity.

• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.32-37
• /
• 2016

In this study, the mixing process of two distinct flow is numerically investigated. Two flow with different physical properties (resin and hardener) are mixed through the opposing mixing jets. At a high pressure mixing process, the high speed flow is provided by two in-line nozzles. In the case of numerical modeling, Reynolds-Averaged Navier-Stokes Equations (RANS) is conducted to model the flow pattern inside the chamber. Additionally, SST k-omega turbulence model is selected to predict the kinetic energy of flow in impingement zone. The results show that mixing of two distinct flows would be efficient if the velocity of jet is high enough and nozzle diameter is a predominant parameter. Also, this velocity would create higher shear stress between two distinct flows which increases the mixing quality as well as strength of formed vortices. Eventually, the histogram of concentration fraction of resin is examined in order to show the quality of mixing and the range of concentration fractions in the output of chamber.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.197-201
• /
• 2010

$SF_6$ gas would be used in power transformer, GIS (Gas insulated switchgear) and so on because of its electrically superior insulation and chemically stable structure. Recently, the reduction of $SF_6$ is required to avoid global warming and the researches on the dilution of $SF_6$ with other gases have been carried out. $SF_6$ mixture gases with $N_2$ and $C_xF_y$ have drawn attention to the synergy effect. However, in order to understand the mechanism of the synergy effect, it is important to analyze and evaluate properties of mixture gases quantitatively. In this paper, we investigated the mechanism of synergy effect from electron collision processes and electron energy distribution by solving Boltzmann equation with propagator method. Three kinds of gases for dilution of $SF_6$ ($SF_6/N_2$, $SF_6/CF$4 and $SF_6/C_4F_8$) are considered in this simulation. On the properties of $SF_6/N_2$ mixture gas, the variation of reduced electric field was shown highly within 0%~40% mixtures of $SF_6$. And the more low-level electron energy has been distributed, the higher insulation capability has appeared.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1208-1220
• /
• 1996

In this paper, the performance of a Carrier Sense Multiple Access/Collision avoidance (CSMA/CA) protocol using stop-and-Wait automatic Repeat reQuest, which is adapted as a draft standard in IEEE 802.11, is analyzed using a mathematical method based on a renewal theory, and simulation checks are performed, which confirm the goodness of our anlysis. In order to anlayze of CSMA/CA, we model that network is composed of finite populationand channel is slotted. And, we consider the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol. As resuls of analysis, we have found that the throughput is degraded and packet delay is increased as the number of stations, Acknowledgement (ACK) length and Distributed coordination function Inter Frame Space (DIFS) length are increased.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.1
• /
• pp.16-22
• /
• 2008

The effect of two-phase spray injected into subsonic cross-flow was studied experimentally. External-mixing of two-phase spray from orifice nozzle with L/d of 3 was tested with various air-liquid ratio that ranges from 0 to 59.4%. Trajectory of spray and breakup phenomena were investigated by shadowgraph photography. Detailed spray structure was characterized in terms of SMD, droplet velocity, and volume flux using PDPA. Experimental results indicate that penetration length was increased and collision point of liquid jets approached to nozzle exit and distributions of mist-like spray were obtained by increasing air-liquid ratio.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.1-9
• /
• 2019

In-mold Coating is a method that can simultaneously perform injection molding and surface coating in injection mold. The material used for coating is two-component polyurethane which is composed of polyol and isocyanate. L-type mixing head can be used to mix polyol and isocyanate uniformly, and inject them inside the mold cavity. The surface quality of the injection molded products by using in-mold coating depends on the mixing uniformity between main agent and hardener. In this study, flow analysis was performed to design a mixing head for uniform mixing of two-component polyurethane. Especially the effects of design parameters of mixing head on mixing uniformity and nozzle pressure were investigated. The parameters of mixing head were mixing chamber diameter, cleaning cylinder diameter, nozzle alignment angle in the horizontal and vertical direction, and cleaning piston position. It was found that optimal design values were mixing chamber diameter of 3.5 mm, cleaning cylinder diameter of 5.0 mm, nozzle horizontal/vertical alignment angles of 140°/160°, and cleaning piston position of 1.8 mm. The optimal values would be used to develop a two-component mixing head achieving an uniform mixing for in-mold coating.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.160-160
• /
• 2011

I-III-VI족 화합물 반도체인 $CuInS_2$(CIS) 박막은 Cu(In,Ga)$Se_2$에 비해서 독성원소를 사용하지 않으므로 환경 친화적이고 Ga, Se를 사용하지 않아 조성의 조절이 쉬우며 태양전지의 이상적인 밴드갭인 1.5 eV에 근접한 1.53 eV의 직접천이형 에너지 밴드갭을 가지고 있어 태양전지의 광흡수층으로써 유망한 재료이다. CIS 박막 증착에는 다양한 방법이 있으며 본 연구에서는 chamber를 진공으로 만들고 CIS를 구성하는 용액으로부터 미립자화 된 입자를 노즐을 통하여 팽창시켜 에어로졸을 생성하고 입자들의 운동에너지를 증착에 직접 이용 할 수 있는 Aerosol Jet Deposition (AJD)라는 방법을 이용하려고 한다. 이 방법은 높은 증착속도로 우수한 박막을 성장시킬 수 있는 저비용 및 단순공정으로 CIS를 증착 할 수 있는 새로운 방법이다. 물을 용매로 하여 수용액 상태의 $CuCl_2{\cdot}2H_2O$, $InCl_3$, $(NH_2)_2CS$를 혼합하여 CIS 용액을 제조하고 carrier gas를 주입하여 CIS 용액을 노즐로 이동시켜 팽창시킨다. 용액이 팽창되면서 온도가 감소하여 응축이 일어나며 이 응축된 용액이 가열된 기판 위에 충돌하여 용매가 증발하면서 결정화된 CIS가 증착이 된다. CIS의 특성은 용액의 전구체 비율, 기판 온도, 팽창 전 압력, chamber 압력 등의 영향을 받는데 본 연구에서는 기판 온도를 증착변수로 선택하여 CIS 박막을 증착하고 박막의 특성을 고찰하고자 한다.

• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.32-41
• /
• 1999

In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.155-162
• /
• 1999

In this paper, an R_ALOHA_CDMA protocol is proposed for voice and data integrated services in the hybrid TDMA/CDMA wireless networks. In the hybrid TDMA/CDMA systems, the backward logical channels are composed of time slots with multiple spreading codes per slot. In the proposed protocol, a voice terminal can reserve a spreading code to transmit voice packets during a talkspurt. On the other hand, whenever a data terminal generates a packet, it transmits the packet through one of the available spreading codes. Throughout the results, it is shown that the system capacity increases in proportion to the number of spreading codes.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2744-2746
• /
• 2001

이 논문에서는 이동 로봇을 위하여 퍼지이론과 Dempster-Shafer 이론을 이용한 불확실한 환경에서의 센서기반 네비게이션 방법을 제안한다. 제안된 제어기는 장애물 회피 동작과 목적지 찾기 동작을 위한 2개의 행동 모듈로 구성되어 있다. 2개의 행동 모듈은 각각 퍼지 이론으로 학습되었고, 적절한 행동 선택 방법으로 선택되게끔 하였다. 견고한 퍼지 제어기를 가진 로봇이 실험 환경내에서 안전하게 움직이기 위하여 자동으로 지도를 구축(Map Building) 하도록 하였다. 이 실험에서 구성된 맵은 평면상의 격자를 중심으로 작성되었고 로봇의 센서에서 읽어들인 센서 값은 D-S 추론 이론을 이용하여 기존의 맵과 혼합되어진다. 즉, 로봇이 움직일때 마다 실험 환경내에서 새로운 정보를 읽어 들이고, 그 정보로 인하여 기존의 지도가 새로운 지도로 갱신되는 것이다. 이러한 작업을 거치면서 로봇은 장애물과 충돌없이 배회하는 것 뿐 아니라 설정된 목적지까지도 쉽게 찾아갈 수가 있다. 실험에 대한 안정성과 확신을 검증 받기 위하여 실제 로봇에 적용하기보다는 먼저 이동 로봇의 시뮬레이션으로 실험 해 보고자 한다.