• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.445-454
• /
• 2020

Non-breakaway crashworthy sliding posts move rigidly with a vehicle in the early stage of vehicle impact. During this stage, a vehicle imparts its linear momentum to the post, experiencing first-stage speed loss followed by second-stage loss from the crush of the energy-absorbing pipe (EAP) installed under the guide rail. An EAP is the key element of a crashworthy sliding post and should be confined to the post foundation. This paper covers the development of an EAP for a sliding post of 507 kg, which is a sliding post type frequently used in Korea for cantilever signs. Detailed explanations of the designs for an EAP structure using LS-DYNA impact simulation are given, and the crashworthiness of the systems are confirmed through crash tests. The EAP presented in this paper can accommodate impacts from 0.9 ton-60 km/h to 1.3 ton-80 km/h, and is applicable to foundations up to 2.7 m in length.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.329-339
• /
• 2017

Impingement jets have been applied in a wide variety of fields as they provide significantly high heat transfer on the impingement-jet stagnation zone. However, the crossflow in an impingement chamber developed by spent wall jets can disrupt and deflect the downstream jets in the array, leading to a decrease in the cooling performance of an array of impingement jets. A numerical analysis is made of the fluid flow and heat transfer characteristics in a corrugated structure that traps the spent air in the corrugations between impingement jets and reduces crossflow effects on downstream jets. All computations are performed by considering a three-dimensional, steady, and incompressible flow by using the ANSYS-CFX 15.0 code. The effects of the configuration parameters of the corrugated structure on crossflow reduction of the array of impingement jets are presented and discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4677-4684
• /
• 2010

In this study, the safety of passenger could be investigated by the analysis of car body to absorb he shock onto automotive door. The damage at door happens because of the collision of automotive door or parking accident due to the carelessness of driver. This door was modelled by CATIA program. The damage process of this model by impact was analyzed and investigated through ANSYS program. The contours of equivalent stress and strain were obtained. It can be known how damage of door becomes under impact and this study result can be thought to contribute for the design of door considering impact safety.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.283-288
• /
• 2004

The finite element modeling of small female occupant for crash simulation is presented in this paper subsequently to the part I of articulated rigid body model. The limbs and internal components are additionally modeled by joining them to the articulated rigid body model for predicting the crash injuries such as bone fractures and joint dislocations. The behavioral characteristics of each limbs and internal components were validated against available cadaveric test results. Accordingly, the human model proposed in this paper could be utilized for the investigation of impact injury mechanism and further complement the lacking biofidelity of current crash dummy.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2013

This study presents relations between the time lag and interaction index of the impinging-jet injectors using the time lag model in a model chamber. The response of the flame is analyzed to artificial perturbation with 5% amplitude of oxidizer speed at a resonance frequency. At the mixing point of fuel and oxidizer, which determines the characteristic length, the relationship between velocity perturbation and heat release rate is quantified by combustion parameters of interaction index and time lag. In this method, time lag or delay is calculated by the characteristic length and the average velocity obtained from numerical results. The tendency that the time delay decreases with axial jet velocity has been observed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.264-270
• /
• 2009

선진국 국립연구소에서만 개발하여 적용중인 hydrocode 또는 wavecode를 최근에 국내에서 C++언어로 ExLO를 개발하였다. 3차원 FEM을 적용한 본 코드의 가장 두드러진 특징은 Lagrangian/ALE/Eulerian solver 들을 모두 한 프레임에 내포하고 있어 적용범위에 따라 즉 변형양상에 따라 선택적인 해석 solver의 적용이 가능하다는 것이다. 즉 문제에 따른 (변형의 양상에 따른) 최적의 시뮬레이션 해석 solver 적용할 수 있다. 본 논문에서는 ExLO를 이용하여 고속 물체의 충돌, 파편의 구조물 관통해석 및 대기 중 Air-blast 충격파 전파해석, 물속에서의 수중폭발 충격파 생성 및 전파해석 등의 예제를 소개하고 그 신뢰성을 확인해 보고자 한다. 대체로 군사적인 적용이 많으나 차츰 민간분야의 다양한 방재현상 시뮬레이션에 적용이 가능할 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.31-38
• /
• 2016

In this paper, the deformation-energy curves of the plastic hinges and the vessel bow, which are the major energy dissipation mechanism of a pile protective structures, were estimated, and the parametric study was performed by using those curves to apply the simplified collision model which developed in the previous study. Considered parameters were the mass of slab, the number of piles, the mass of vessel and the collision speed. As results, the difference of energy dissipation mechanism of two pile types (filled and non-filled) were revealed, and the collision behaviors of the protective structures could be tuned by the control of the inertia mass of capping slab. Therefore the simplified collision model can be used in a primary design and optimal design.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.173-177
• /
• 2020

In this study, the side doors of mid-size sedan vehicles of models A and B which are currently prone to rollover accidents are compared with each other by the structural analyses. As a result of the structural analysis, both models showed the maximum deformation at the point of overturning or impact load, and the model A of the two models was able to withstand greater impact load compared to the model B. In addition, the maximum stress happened at the door edge, and model B was 2.5 times more stressed than model A. In the accident of a crash, model A, which has the smaller maximum stress, is able to withstand greater impact loads than model B. Since model B has a larger deformation than model A, it is considered to be more dangerous than model A in the side impact accident. By applying the impact analysis of automotive side door by the class of vehicle, the study result at this paper is considered to be favorable as the convergent research material which can apply the aesthetic design.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.24-31
• /
• 2010

Combustion-stability rating of impinging-jet injector is conducted numerically using hot-fire simulation in a subscale chamber with the five-element injector head. A sample F(fuel)-O(dxidizer)-O-F impinging-jet injector is adopted. In this work, instantaneous chemical reaction is adopted for hot-fire simulation based on the assumption that mixing process of fuel and oxidizer streams is controlling. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions. The present stability boundaries are in a good agreement with air-injection and hot-fire experimental data. The proposed numerical method can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.87-96
• /
• 2006

A ship collision analysis by finite element method is performed considering the effects of mass and speed of ship and material and shape of structures to analyze the dynamic characteristics by ship collision. From this analysis, collision load-time history and damage of ship and structures are obtained. In this study, results of finite element analysis are compared with previous studies in USA, Japan and some countries of Europe. Dynamic characteristics are different from each other according to interaction between ship and structures. It seems that there are lots of factor to have effects on the ship-structures interaction. Because little information is available on the behavior of the inelastic deformation of materials and structures during the type of dynamic impacts associated with vessel impact, assumptions based on experience and sound engineering practice should be substituted. Therefore more researches on the interaction between ship and structures are required.