• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.999-1005
• /
• 2008

RFID(Radio Frequency IDintification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a high efficiency improvement effect was visible.

• Journal of the Korean Society of Visualization
• /
• v.17 no.1
• /
• pp.26-33
• /
• 2019

The rapid increase in the usage of energy in the fast-changing industries has led to resource depletion and environmental conflicts. Many types of research are available on heat exchangers that undergo simple energy conversion processes. The impingement rods discussed in this study improves the durability of the heat exchanger and ensure the stability of the operation. However, it is uncertain about selecting the installation location of the impingement rods. The commercially available CFD code, ANSYS CFX, is used for the impingement rods installation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.78-89
• /
• 1993

A new theory based on the modified momentum and energy conservation has been proposed in order to overcome the drawbacks included in previous theories which are used for the determination of dynamic yield stresses and the investigation of dynamic behavior of metals. Then the improvements suggested by the new theory have been manifested through the analysis of the error included in the measurement of deformed length and through the comparison between the new theory, existing theories, and experimental results performed by previous workers. Meanwhile rod impact test has been performed which uses a compressed- air system for the acceleration of flat-ended cylindrical free-cutting brass rods. From the geomtrical measurements of deformed length, the dynamic yield stress of free-cutting brass has determined.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1795-1802
• /
• 2009

Motion based serious game is a new style of game and exercise using hands, arms, head and whole body. At that time gamer's reachable movement space is an important game space and interaction happening place. We propose efficient game spatial division and analysis algorithm that gives special information for collision avoidance of game objects. We devide into 9 parts of game space and check the enemy position and upper, down, left and right side movement information of gamer and calculate optimal path for collide avoidance of the enemy. To evaluate the method, we implemented a motion base serious game that consists of a web cam, a player, an enemy, and we obtained some valid results of our method for the collision avoidance. The resole demonstrated that the proposed approach is robust. If movement information is in front of enemy, then the enemy waits and finds the place and runs to avoid collision. This algorithm can be used basic development of level control and effective interaction method for motion based serious game.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.427-433
• /
• 2022

Obstacle detection, collision recognition, and avoidance technologies are required the collision avoidance technology for UAVs. In this paper, considering collinear multiple static obstacle, we propose an obstacle detection algorithm using LiDAR and a collision recognition and avoidance algorithm based on CPA. Preprocessing is performed to remove the ground from the LiDAR measurement data before obstacle detection. And we detect and classify obstacles in the preprocessed data using the K-means clustering algorithm. Also, we estimate the absolute positions of detected obstacles using relative navigation and correct the estimated positions using a low-pass filter. For collision avoidance with the detected multiple static obstacle, we use a collision recognition and avoidance algorithm based on CPA. Information of obstacles to be avoided is updated using distance between each obstacle, and collision recognition and avoidance are performed through the updated obstacles information. Finally, through obstacle location estimation, collision recognition, and collision avoidance result analysis in the Gazebo simulation environment, we verified that collision avoidance is performed successfully.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.293-309
• /
• 2014

The Qinling-Dabie-Sulu-Hongseong-Odesan collision belt was formed by the collision between the North China and South China Cratons during late Permian to Triassic. During the collision, Triassic post-collision igneous rocks regionally intruded in the Qinling and the Hongseong-Odesan collision belts which represent the western and eastern ends of the collision belt, respectively. However, no and minor Triassic post-collision igneous activities occur in the Dabie and Sulu belts respectively. The peak metamorphic pressure conditions along the Qinling-Dabie-Sulu-Hongseong-Odesan belt indicate that the slab break-off occurred at the depth of ultra-high pressure (UHP) metamorphic condition in the Dabie and Sulu belts and at the depths of high pressure (HP) or high pressure granulite (HPG) metamorphic condition in the Qinling and Hongseong-Odesan belts. In the Dabie and Sulu belts the heat supply from the asthenospheric mantle through the gab formed by slab break-off could not cause an extensive melting in the lower continental crust and lithospheric mantle directly below it due to the very deep depth of slab break-off. On the other hand, in the Qinling and Hongseong-Odesan belts, shallower slab break-off caused the emplacement of regional post collision igneous rocks. The post-collision igneous rocks occur in the area to the north of the Mianlu Suture zone in the western Qinling belt and crop out continuously eastwards into the areas to the north of the Shangdan Suture zone in the eastern Qinling belt through the areas within the South Qinling block. This distribution pattern of post collision igneous rocks suggests that the Triassic collision belt in the Mianleu Suture zone may be extended into the Shangdan Suture zone after passing through the South Qinling block instead into the boundary between the South Qinling block and the South China Craton.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.283-285
• /
• 2002

조합 경매는 구매자들이 원하는 상품들을 조합해서 입찰할 수 있는 경매다. 그러나 판매자의 이익을 최대로 하는 승자를 결정하는 문제는 NP-complete이다. 분기 한정법(branch and bound)을 사용해서 최적의 승자를 찾을 때, 어떤 비드(bid)를 선택해서 분기할 것인가를 결정해야 한다. 이 때, 비드를 선택하는 휴리스틱이 분기 한정법의 성능을 결정하는 중요한 역할을 한다. 본 논문에서는 조합경매의 승자를 결정하기 위해서 분기 한정법과 Linear Programming을 사용할 때, 분기할 비드와 충돌하는 비드들을 동시에 고려하는 비드 선택 휴리스틱을 제안한다. 실험을 통해서 제시하는 휴리스틱의 성능이 우수함을 보였다.

• 전기의세계
• /
• v.42 no.1
• /
• pp.5-11
• /
• 1993

금속이나 세라믹 입자를 용사하여 보호피막을 형성하는 기술은 화염을 사용하는 방법에서 시작했으며 용사재료는 분말, 선, 봉의 형태로 공급되었다. 1960년대에 상업적인 plasma 용사장비가 개발되었으며 여기서 사용된 D.C.plasma jet를 이용하여 분말형태의 용사재료를 용융하고 고속으로 피용사테에 용융입자를 분사하여 피용사체면에 충돌시켜 다층의 얇은 피막을 형성한다. 최근(1985년)에는 R.F.(Radio Frequency) Plasma를 이용하여 열전도도가 작은 재료나 산소와 반응성이 큰 재료를 용사하는 방법도 개발되고 있다. 용사피복법은 현재 여러가지 방법이 실용되고 있으며 재료를 용융하는 열원에 따라 분류하면 표1과 같다. 즉 산소와 연료 가스의 혼합에 의한 연소나 폭발에너지를 이용하는 가스식 용사법과 Arc, Plasma등의 전기 에너지를 이용하는 전기식 용사법으로 크게 나눌 수 있다.

• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2012

The present study conducts experimental investigation on spreading and deposition characteristics of a $4.3{\mu}l$ de-ionized (DI) water droplet impacting upon aluminum (Al 6061) flat and textured surfaces. The micro-textured surface consisted the micro-hole arrays (hole diameter: $125{\mu}m$, hole depth: $125{\mu}m$) fabricated by the conventional micro-computer numerical control (${\mu}$-CNC) milling machine process. We examined the surface effect of texture area fraction ${\varphi}_s$ ranging from 0 to 0.57 and impact velocity of droplet ranging from 0.40 m/s to 1.45 m/s on spreading and deposition characteristics from captured images. We used a high-speed camera to capture sequential images for investigate spreading characteristics and the image sensor to capture image of final equilibrium deposition droplet for analyze spreading diameter and contact angle. We found that the deposition droplet on textured surfaces have different wetting states. When the impact velocity is low, the non-wetting state partially exists, whereas over 0.64 m/s of impact velocity, totally wetting state is more prominent due to the increase kinetic energy of impinging droplet.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.1
• /
• pp.41-49
• /
• 2020

Narrative activities are closely related to the space where human beings live and their awareness of space. In the film Parasite (2019), Director Bong Joon-ho demonstrated his unique insights into the spatial layout of the city. He not only built opposing up and down spaces with clear differentiation of distinct classes, but also conducted complex and smooth narratives in space. Bong Joon-ho used realism to express differences and some unresolvable contradictions between the classes in capitalist society by showing the daily lives of people living in different spaces. This present research focuses on Bong Joon-ho's spatial narrative in the film Parasite, hoping to observe the relationship between characters and between social classes, further exploring Director Bong Joon-ho's spatial narrative awareness and his film creation style. The research reveals that space, an important element of film narrative, has been paid attention to in the film Parasite and space is the narrative's foundation in this film. The narrative of film space is not limited to physical space but also refers to the relationship between characters and the society in which they live, showing metaphorical significance. This film transcends a genre film, portraying the changes of social classes in the development of the society. The film as a whole is one combining ideology and artistry. Every viewer can feel resonated from this film and understand the thought-provoking social situation.