• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.65-77
• /
• 2013

Recent advanced sensors and communication technologies have been widely applied to advanced safety vehicle (ASV) for reducing traffic accident and injury severity. To apply the advanced safety vehicle technologies, it is important to quantify the safety benefits, which is a fundamental for justifying application. This study proposed a methodology for quantifying the effectiveness of the advanced driver assistant system (ADAS), and applied the methodology to lane departure warning system (LDWS) and automatic emergency braking system (AEBS) which are typical advanced driver assistant systems. When the proposed methodology is applied to 2008-2010 gyeonggi-province crash data, LDWS would reduce about 10~14% of relevant crashes such as head-on, run-off-the road, rollover and fixed-object collisions on the road. In addition, AEBS could potentially prevent about 50% of total rear-end crashes. The outcomes of this study support decision making for developing not only vehicular technology but also relevant safety policies.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.24-31
• /
• 2013

This paper describes a coordinated control algorithm for rear-side collision avoidance. In order to assist driver actively and increase driver's safety, the proposed coordinated control algorithm is designed to combine lateral control using a steering torque overlay by Motor Driven Power Steering (MDPS) and differential braking by Vehicle Stability Control (VSC). The main objective of a combined control strategy is twofold. The one is to prevent the collision between the subject vehicle and approaching vehicle in the adjacent lanes. The other is to limit actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort. In order to achieve these goals, the Lyapunov theory and LMI optimization methods has been employed. The proposed coordinated control algorithm for rear-side collision avoidance has been evaluated via simulation using CarSim and MATLAB/Simulink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.463-468
• /
• 2009

In VANET(Vheicle Ad hoc Network), the researches based on the wireless LAN are conducting and the method based on 802.11a is being adapted in IEEE 802.11p WAVE(Wireless Access in Vehicular Environments). However, wireless LAN which uses a single channel in a competition can cause transmission delays because of a frequent collision and a use of CSMA/CA to avoid competition in VANET requiring a fast access. In this paper, we designed CMMP (Clustering based Multi-channel MAC protocol) adequate to VANET and then confirmed the appropriate channel conditions in a V2V communication on the basis of this protocol. The simulation results showed that a packet collision and a transmission delay by the use of an existing single channel based on the contention decreased more than 60% by CMMP.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.705-708
• /
• 2003

본 논문에서는 무선 센서 네트워크의 특성을 고려한 미디어제어 프로토콜의 설계에 있어서의 고려사항 및 설계기법에 대해서 제안하고 있다. 무선 센서 네트워크는 제한된 에너지를 가지는 배터리를 에너지원으로 사용하는 센싱 디바이스들로 구성되어 있으며, 이러한 디바이스들로 구성된 네트워크는 하나 혹은 그 이상의 공통의 작업을 수행하는데 그 목적이 있다. 일반적으로 무선 센서네트워크는 ad hoc 헝태의 구조를 가지며, 각각의 노드들은 장시간동안 비활성화 상태에 머무르게 되며, 센싱을 하기 위한 특정 이벤트가 발생하였을 때만 활성 상태로 전이하게 된다. 이와 같은 센서 네트워크의 특성은 IEEE802.11 과 같은 기존의 무선 미디어 제어 프로토콜과는 차별성을 띄게 된다. 센서 네트워크는 노드별 미디어 접근 공정성이나 시간지연보다는 에너지절약과 위상자동설정에 더 중점을 두고 있기 때문에 이에 적합한 미디어 제어 기술이 필요한 것이다. 본 고에서는 에너지 소모를 최소화하고 위상 자동 설정을 지원하기 위한 3 가지의 기법들에 대해서 제안하고자 한다. 첫째로 이벤트 발생 여부에 따른 노드의 신호감지 및 Sleep 상태 전이 및 이웃 노드들과의 가상동기화기법을 이용한 에너지 절약 기법에 대해서 제안하고, 충돌회피 기법에 대해서 살펴보도록 하겠다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.184-185
• /
• 2022

국제해사기구(IMO)에서는 2017년 미래선박으로서 자율운항선박(MASS)의 개념을 채택한 바 있으며, 실해역 운항을 위한 국제법규 및 규정 검토를 진행하고 있다. 무인선은 악천후시 유인선이 수행하기 힘든 임무를 대체하거나 지원하기 위하여 원격 혹은 자율적으로 운용되는 일종의 소형 자율운항선박을 의미한다. 선박해양플랜트연구소에서는 2011년부터 해양수산부 연구개발사업을 통하여, 무인선 아라곤호 시리즈를 개발하였으며, 아라곤1호, 2호, 3호 등 총 3척을 운용하고 있다. 해당 선박은 길이 8미터, 배수량 약 3톤급의 활주선형으로 원격운항, 경로추종 및 충돌회피 등 자율운항 기능이 적용되어 있다. 한편, 무인선은 공중 드론과 달리 탑재중량이 크고, 항속시간이 길어 해상에서 감시,첩보, 정찰 등에 효용성이 높으며, 최근 한척보다는 여러 척을 운용하는 것이 효과적이어서 무인선 군집(USV Swarm)으로 해상임무를 수행하려는 연구가 다양하게 진행되고 있다. 선박해양플랜트연구소에서는 2019년부터, 기존의 아라곤호 시리즈 무인선들을 활용하여, 무인선 군집 자율운항 시스템 개발을 위한 "인공지능 기반 무인선 상황인식 및 자율운항 기술 개발" 과제를 진행하고 있다. 해상에서 불법선박이 출현시 이를 효과적으로 단속하기 위하여 추적 기동이 필요한데, 본 연구에서는 무인선 3척을 활용하여 불법선박을 추적하는 해상 감시 실해역 시험을 수행하였다. 본 논문에서는 무인선 군집 자율운항 시스템에 대하여 소개하고, 무인선 군집을 활용한 불법선 추적에 관한 실해역 시험결과에 대해 소개한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.109-118
• /
• 2009

The conventional lane changing model has been developed without acceleration or deceleration of vehicles at target lane. Thus, existing lane changing models have limitation to apply in real world. In this paper, lane changing model considered acceleration or deceleration, and calculated the safety distance between subject vehicle and adjacent vehicles for lane changing as well. Simulation was conducted to verify the validity and the efficiency of the developed lane changing model in this paper. Several scenarios were carefully examined by safety distance between subject vehicle and adjacent vehicles. In the result, it was verified that if gap between subject vehicle and adjacent vehicles is larger than safety distance, lane changing behavior between subject vehicle and adjacent vehicles avoids collision. The suggested lane changing model may be applied at the future driver assistance system and advanced safety vehicle.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1443-1449
• /
• 2013

Automatic detection of vehicles in front is an integral component of many advanced driver-assistance system, such as collision mitigation, automatic cruise control, and automatic head-lamp dimming. Regardless day and night, tail-lights play an important role in vehicle detecting and status recognizing of driving in front. However, some drivers do not know the status of the tail-lights of vehicles. Thus, it is required for drivers to inform status of tail-lights automatically. In this paper, a recognition method of status of tail-lights based on video processing and recognition technology is proposed. Background estimation, optical flow and Euclidean distance is used to detect vehicles entering tollgate. Then saliency map is used to detect tail-lights and recognize their status in the Lab color coordinates. As results of experiments of using tollgate videos, it is shown that the proposed method can be used to inform status of tail-lights.