• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.213-221
• /
• 2007

Recently, environmental design are becoming a matter of grave concern in shipbuilding. Out of these concern, oil spilt which is induced by grounding accidents is very critical reason of the ocean pollution. Therefore, a series qf quarter of 105k tanker model grounding simulations were conducted to analyze it's characteristics for the accident. ship get using LS-DYNA3D. In this paper, to conduct whole simulations, a meshsize convergence test was carried out to determine appropriate meshsize for grounding test. After the series analysis. These results were analyzed as each case.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.145-154
• /
• 2013

HNS, including crude oil and products, shipments have increased. The risk analysis of HNS has assumed the importance, especially in maritime transportation area. There are various forms and kinds of HNS and the consequences of an accident are serious. In order to provide practical measures for preventing accidents, this study analyses the potential risks of HNS on maritime transportation accidents at domestic sea by using Event Tree Analysis. This study carries out risk assessment with F-N curve and risk matrix focusing on liquid cargo carriers (Oil and Products Tanker, Chemical Tanker, LPG/LNG Tanker, etc.). Explosion and sinking, suffocation indicate high consequence when on collision represent high probability. Improving human errors should be the main factor to mitigate risk on human lives.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.173-180
• /
• 2016

OBJECTIVES : Fixed roadside objects are a threat to drivers when their vehicles deviate from the road. Therefore, such roadside objects need to be suitably dealt with to decrease accidents. This study determines the factors affecting the severity of accidents because of fixed roadside objects. METHODS : This study analyzed the crash severity impact of fixed roadside objects by using ordered probit regression as the analysis methodology. In this research, data from 896 traffic accidents reported in the last three years were used. These accidents consisted of sole-car accidents, fixed roadside object accidents, and lane-departure accidents on the national highway of Korea. The accident severity was classified as light injury, severe injury, and death. The factors relating to the road and the driver were collected as independent variables. RESULTS : The result of the analysis showed that the variables of the crash severity impact are the collision location (left side), gender of the driver (female), alcohol use, collision facility (roadside trees, traffic signals, telephone poles), and type of road (rural segments). Additionally, the collision location (left side), gender of the driver (female), alcohol use, collision facility (street trees, traffic signals, telephone poles), and type of road (rural segments), in order of influence, were found to be the factors affecting the crash severity in accidents due to fixed roadside objects. CONCLUSIONS : An alternative solution is urgently required to reduce the crash severity in accidents due to fixed roadside objects. Such a solution can consider the appropriate places to install breakaway devices and energy-absorbing systems.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1315-1324
• /
• 2016

Recently, the increasing interest in drones has resulted in development of new related technologies. Attention has been focused toward research on swarm flight which controls drones simultaneously without collision. Thus, complicated missions can be completed rapidly through collaboration between drones. Due to low position accuracy, GPS is not appropriate for the outdoor mission involving accurate flight. In addition, the inaccurate position estimation of GPS gives rise to the serious problem of collision, since many drones are controlled in a narrow space. In this study, we increased the accuracy of position estimation through various sensors with Real-Time Kinematic-GPS (RTK-GPS). The mode switching algorithm was proposed to minimize the problem of sensor error. In addition, we introduced the outdoor swarm flight system based on the proposed position estimation.

• Composites Research
• /
• v.18 no.6
• /
• pp.26-33
• /
• 2005

The mechanical properties of composite materials may severely degrade in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause considerable damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PVDF(polyvinylidene fluoride) film sensors were used for monitoring high-velocity impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research shows how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composite.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.740-746
• /
• 2013

Design with crashworthiness concept has been emphasized for almost aircraft and motor vehicles. However, crashes accompanied serious injury and death have been continuously occurred, and will be occurred subsequently. What was worse, it is a well-known fact that there were a good many crashes classified as survivable accidents in which fatal injuries were reported. But we cannot say that fatal injuries were inevitable consequences of those crashes. If crashworthy design for seat, restraint systems, and cabin strength were adequate or right, survivability in a crash event could be maximized greatly. To substantiate the right crashworthiness, we must thoroughly understand the characteristics of human tolerance under abrupt acceleration change, and the cabin design should be combined with proper use of energy absorbing technologies that reduce accelerations experienced by the occupants. In this paper, the emphasis on the human tolerance under abrupt accelerations as well as the necessity of change in design requirements for crash environment will be stressed to widen the belt of consensus for the right crashworthy design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1437-1442
• /
• 2010

A slipper metal is used for power transmission in the aluminum hot rolling process. The slipper metal connects a spindle with a coupling. Therefore, if the slipper metal is seriously damaged, the spindle and the coupling will crash into each other. Therefore, preventing the destruction of the slipper metal is essential for ensuring a long mechanical life cycle. In this study, the structural analysis and optimal design of the slipper metal was carried out by finite element method for life extension of the slipper metal. To verify the interference of spindle assembly with modified slipper metal, a kinematics simulation was performed by applying various combinations of dynamic boundary conditions. As a result of structural analysis and optimal design of the slipper metal, the maximum stress of the modified slipper metal was lower than that of the initial model by 22%.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.233-239
• /
• 2003

Falling related injuries are categorized as the most serious and common medical problems experienced by the elderly, hip joint fracture, one of the most serious consequences of falling in the elderly, occurs in only about 1% of falling. Nevertheless, hip fracture accounts for a considerable part of the disability, death, and medical costs associated with falling. In this study, we considered the impact angle and displacement rate in falling as another factor affecting femoral strength. Using a fresh-frozen human femur, we developed system to simulate the falling condition and then conducted the experiments changing the impact angle (0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$) of proximal femur. Also, in order to analyze the relative risk due to falling to normal situation in proximal femur, we did the static test simulating the two-legged stance condition. The results showed that the change in impact angle affected the strain distribution in proximal femur, and that a large deformation in femoral neck than in other sites. Furthermore despite low impact velocity, a large deformation in proximal femur occurred in the impact test and different strain distribution was observed compare to the static case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1654-1662
• /
• 2006

An ad hoc network is multi-hop network composed of radio links. and the transmission quality of a radio link is more unstable than that of a wired circuit. Packet loss thus occurs frequently in an ad hoc network, and the consequent connection failure results in a severe deterioration of TCP performance. TCP performance also deteriorates because of the collision of data packets and ACK packets in the radio channel. In this paper we study to improve the performance of the Mobile Ad-hoc network by using Delayed ACK algorithm with our proposed ODA(Ordering-Delayed ACK) method. The proposed ODA algorithm increases the number of the data packets orderly at the receiver side which is going to be applied for the Mobile Ad-hoc network. We accomplished a computer simulation using NS-2. From the simulation results, we find the proposed ODA algorithm obviously enlarge the channel capacity and improve the network performance at the situation of multi-hop of ad-hoc network than the existing Delayed ACK algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.233-241
• /
• 2010

CoSlide is a collaborative system, extending the Jakarta Slide WebDAV server. The CoSlide server provides group workspaces for collaborators. CoSpace is a client which supports various collaborative authoring activities on the CoSlide server through the WebDAV protocol. CoSpace provides graphic user interfaces to support effective interaction among the collaborators, managing the shared resources for them. However, during collaboration, simultaneous modifications on the content of shared resources might cause conflicts among the content of the revisions made by the collaborators, leading to serious problems on project progress. In this paper, we describe an extension of the CoSpace client to solve the problem. The extended CoSpace client supports the remote version management facility through which the collaborators can manage the versions of the associated server resources in the distance. Also, to identify the changes of the text files such as program source codes, the extended client provides the facility for comparing two versions and displaying the differences in a visual manner. In addition, it provides the version management of a whole workspace and the removal of all the unnecessary versions of the designated resources.