• Korean Journal of Cognitive Science
• /
• v.10 no.4
• /
• pp.63-70
• /
• 1999

Reconstruction of collision accidents is to analyze the cause of accidents and collision behavior using available information from vehicle accident circumstances. This paper introduces a collision reconstruction system which is developed to be applicable to traffic accident reconstruction. Our System combines both quantitative and qualitative collision models so as to compensate for weaknesses in each with strengths of each other. I It provides accurate predictions and causal explanations of the collision behavior. During r reverse analysis of collision. qualitative simulation is used to verify a hypothesis and to detect any conflict in early stage of reconstruction. It is implemented and applied to real car-to-car collision accidents. The test results verify the reliabilities of our techniques.

• Journal of Intelligence and Information Systems
• /
• v.4 no.2
• /
• pp.35-44
• /
• 1998

자동차 사고 재구성이란 사고 상황으로부터 가능한 모든 정보를 수집, 분석하여 사고 거동 및 원인을 규명하는 작업을 의미한다. 본 논문에서는 자동차 사고 재구성에 직접 적용이 가능하도록 개발된 범용성의 정성적 충돌 전문가 시스템의 Prototype을 소개한다. 이 시스템은 충돌 전 물체의 운동 방향과 공간에서의 정보가 주어졌을 때, 충돌로 인한 물체의 순간적인 운동을 정성적으로 예측한다. 분야 모델은 정성적 충돌 이론과 정성적 계산을 제공하는 정성적 수학의 지식 베이스로 구성된다. 충돌로 인한 물체의 운동을 해석하는 데 있어, 충돌 전 물체의 운동 방향과 충돌시의 기하학적 배치사이의 상호 작용을 분석하는 것이 그 핵심을 이루고 있다. 본 논문에서는 그 상호 작용을 밝혀 내어 정성적 표현 방식에 의거하여 해석하는 충돌 이론을 소개하였다. 추론 기관을 설계하는데 있어서는 동력학 정보뿐만 아니라 공간 정보를 추론하기 위한 기법이 제시되었다.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.107-115
• /
• 2000

We suggest a method which solves the planar, two vehicle collision reconstruction problem. The method based on the Principle of impulse and momentum determines the pre-impact velocity components from Post-impact velocity components, vehicle Physical data and collision geometry. A novel feature is that although the impact coefficients such as the restitution coefficient and the impulse ratio are unknown, the method can estimate automatically the coefficients and calculate the pre-impact velocity components. This reverse calculation is important for vehicle accident reconstruction, since the pre-impact velocities are unknown and Post-impact Phase is the starting Point in a usual collision analysis. However. an inverse solution is not always Possible with the analytical rigid-body impact model. Mathematically, one does not exist under the common velocity condition. On the other hand, our method has a capability of reverse calculation under the condition if the absorbed energy during the collision process can be estimated using the crush profile. To validate the developed collision reconstruction a1gorithm, we use car-to-car collision test results. The analysis and experimental results agree well in the impact coefficients and the Pre-impact velocity components.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2011

In order to reconstruct vehicle-pedestrian collision accidents, this paper presents a fuzzy tool to estimate accurately the impact velocity of the vehicle using parameters which could be easily collectable at the accident scene. The fuzzy rules and membership functions were set up using number of over 200 domestic and foreign data from accidents and empirical tests and 700 data from multibody simulation experiments. The developed fuzzy tool deduces the category of pedestrian trajectory and impact speed of the vehicle using 4 membership functions and 2 logic rules. The membership function of throw distance was differently set according to the deduced category of trajectories. The implemented fuzzy program was validated through comparing with the domestic and foreign empirical data. The output results agree very well in impact velocities of vehicle resulting the accuracy and usefulness of the developed tool in the reconstruction analysis of vehicle-pedestrian collision accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.507-513
• /
• 2021

This study examined the final stop position and posture of both vehicles, the damaged part of the vehicle, the road surface, the specifications of the vehicle, and the angle of impact, centering on the case of a collision in which no surface trace was found. As a result of the simulation, the impact velocity of an SM5 and Lexus was 131 km/h and 74 km/h, respectively, and the impact angle of the SM5 and Lexus was 0.91° and -161.07°, respectively. The cause of the accident was that the SM5 passed through the intersection exceeding the maximum speed limit of 61 km/h and entered the Lexus' left turn lane. Lexus collided during the evacuation to avoid the collision. The collision trajectory error rate of the simulation was approximately 1.4%. Of the subjective experience of accident investigators, the collision dynamics and vehicle engineering aspects and simulations were actively utilized to provide close-to-fact cause identification.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.239-247
• /
• 2015

Recently, various research studies on frontal collision and rear-ender which occur more frequently compared to others are underway as the public interest on them is growing. This study analyzes scientifically the relationship between effective impact speed and injury incidence for vehicle crash accident reconstruction and presents a relevant model formula. Because real vehicle experiments have certain limitations such as possible injuries, this study efforts to collect and analyze as many materials as possible to substitute real vehicle experiments, including data from various collision tests and human experiments. As a result, this study present a threshold in which head-on collisions and rear impacts do not cause injuries under 7 km/h of effective impact speed, and suggests a model formula showing that injury extent is linearly proportional to effective impact speed through collision speed and amount of plastic deformation. In conclusion, a model formula for estimating effective impact speed and injury incidence newly proposed in this study is expected to be used as a minimum standard of judgment in disputes on the injury extent of passenger in head-on collisions and rear impacts. Furthermore its availability in terms of technological analysis in legal arguments is expected to be very high if this study will be enhanced by referring to scientific analyses of various real accidents so as to apply it in various types of collision accidents.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.49-56
• /
• 2009

In this study, a side collision accident reconstruction using database based on the deformed shape information from the collision test using model cars is suggested. A deformation index and angle index related to the deformed shape is developed to set the database for the collision accident reconstruction algorithm. Two small size RC cars are developed to carry out the side collision test. Several side collision tests according to the velocity and collision angles are performed for establishing the side collision database. A high speed camera with 1000fps is used to capture the motion of the car. A side collision accident reconstruction algorithm is developed and applied to find the collision conditions before the accident occurs. Two collision cases are tested to validate the database and the algorithm. The results obtained by the reconstruction algorithm show good match with original conditions with regard to the velocity and angle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.171-180
• /
• 2001

Collision accident reconstruction algorithm are developed based on the deformation shape and severity of a car body. At first, the body stiffness equation representing the force-deformation relationship is derived using finite element analysis for head on collision of two cars. The database of deformation shapes and energies is constructed for five different collision configurations; each configuration contains three velocity conditions. Deformation shapes are obtained using a curve fitting method and result in cubic polynomials. Deformation energies are calculated using a stiffness equation and deformation data. Three algorithms are developed to reconstruct collision configuration compared with constructed database. The developed algorithms show reasonably good performance to find collisions conditions for some test problems.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.119-130
• /
• 2010

Reconstruction analysis of traffic accident is done by analyzing diverse data such as the road, accident traces and damage on the automobile. Most data can be a variable in the process of analysis, and measurement error of the data occurs from the investigator, tool and the given environment. Therefore, accident analysis always has some risks of measurement uncertainty. This research quantify the uncertainty in traffic accident analysis by conducting repetitive measurement experiments for variables with high probability of uncertainly such as length (i.e. geometric structure of the road, tire marks) and coefficient of friction. This paper also suggests an analysis result for the uncertainly of photographic observation of automobile crush measurement. These statistical distributions can help determine appropriate ranges for the input data in order to estimate the accident reconstruction uncertainty.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.503-512
• /
• 2014

In this paper, various tire blow-out force experiment data were collected and analyzed to obtain approximate values of related coefficients such as rolling resistance, self-aligning torque, cornering stiffness, and radial stiffness for the analysis of the motion of vehicles with tire blow-outs. These coefficients related to tire blow-outs were input into a vehicle accident analysis program to simulate and examine the effects of tire blow-outs. Various configurations and velocities of vehicle collisions without tire blow-outs were also used as reference to establish collision events of vehicle collisions with tire blow-outs. For the events, the simulation analysis was performed and collision characteristics were obtained. Consideration of tire blow-outs or damages suggested in this study will greatly contribute to more reliable vehicle accident reconstructions.