• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.34-35
• /
• 2019

The objective of this study is to analyze the risk of collision accidents to the VTSOs(Vessel Traffic Service Operators) as small vessels are expanded for monitoring targets. For this purpose, the risks of accidents and quasi-incidents involving small ships in the VTS area were analyzed by the collision risk model(CoRI) from the view-point of VTSOs. In addition, by analyzing risk of whether or not small vessels are included in the monitoring target by CoRI, we will contribute to the preparation of a proper range of the vessel for monitoring taget through various case studies in the future.

• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.409-409
• /
• 1998

본 연구는 운전자 특성 및 교통사고 발생유형에 따른 사고 심각도(Severity)를 분석함으로써 교통사고를 유발키 쉬운 운전자 집단과 사고 발생시 위험도가 높은 사고유형을 규명하고자 하였다. 교통사고 위험집단 분석을 위한 운전자 특성은 성별, 차종, 연령 등을 대상으로 하였으며, 사고유형별 심각도 분석은 사고유형을 여덟 가지로 분류하고, 결과의 신뢰성 확보를 위하여 안전벨트 착용여부를 추가하여 상해정도와의 관계를 비교하였다. 로그-선형 모형 및 로짓 모형을 사용하여 카테고리 자료를 분석하였으며, 그 결과 위험집단 분석에서는 '20세 미만의 이륜차 운전자', '41세에서 50세까지의 택시운전자'가 가장 위험한 것으로, 또한 남자보다는 여자가 승용차, 택시, 이륜차 등에 관계되었을 때 위험한 것으로 조사되었다. 사고유형과 심각도와의 관계에서는 정면충돌 사고와 앞지르기 시 우회전시 사고가 기여위험도(Odds Multiplier)가 매우 높아 부상 또는 사망사고와 연계될 가능성이 큰 것으로 나타났다. 따라서 교통사고의 예방과 사고발생시의 심각도 경감을 위해서는 교통사고 취약계층으로 분석된 위험집단에 대한 교통안전 교육 및 홍보가 강화되어야 하고, 정면충돌 사고와 앞지르기 시 우회전시 발생하는 사고를 줄일 수 있는 방안이 연구되어야 할 것이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.542-549
• /
• 2019

Maritime accidents, such as the collision of a fishing boat in Incheon's Yeongheung Island, result in several casualties and property damage, even if they occur just once. To prevent such accidents, the Incheon Metropolitan Government is implementing safety management policies; further, they will provide ship collision warning services to prevent collisions on WAVE (Wireless Access in Vehicular Environment) communication-based ship safety operation pilot projects. However, to realize these objectives, a service standardization method is required that defines specific service types, configurations, and systems, which should be prepared based on user requirement analyses. In this study, a standardization method of WAVE communication-based collision warning service was developed by analyzing the requirements of the vessel operators subject to the services and related authorities. This will help improve the quality of service, ensuring professionalism and reliability through continuous improvement and efforts for standardization, as well as data derived from demonstration projects. Therefore, it is expected to help prevent maritime accidents to a considerable extent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.44-51
• /
• 2023

The Convention on the International Regulations for Preventing Collisions at Sea, 1972 (COLREGs) was adopted to prevent ships from colliding with other ships or any object such as the seabed. COLREGs have been codified and refined since the mid-19th century, and have reached the present. Therefore, the terms and sentences used in COLREGs also have distinct academic and legal connotations. However, in the Maritime Safety Act of the Republic of Korea, which translated COLREGs into domestic law, the "risk of collision" and the "danger of collision" was used in the law without distinguishing their meanings. Accordingly, the difference between "risk" and "danger" was analyzed with reference to the definition of risk by an authoritative international organization of the United Nations such as the International Maritime Organization and the International Organization for Standardization as a well-known and authoritative non governmental organization. In addition, the cases codified in COLREGs and translated cases in the Maritime Safety Act were analyzed to highlight the need for amending the Maritime Safety Act. From the perspective of safe navigation, it is expected that the Maritime Safety Act in the future would distinguish between "danger" and "risk" so that the efforts of watch officers to prevent collisions could be further systematized.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.53-66
• /
• 2013

The major purpose of this study is to evaluate methodologies to predict the injury severity of pedestrian-vehicle collisions. Methodologies to be evaluated and compared in this study include Binary Logistic Regression(BLR), Ordered Probit Model(OPM), Support Vector Machine(SVM) and Decision Tree(DT) method. Valuable insights into applying methodologies to analyze the characteristics of pedestrian injury severity are derived. For the purpose of identifying causal factors affecting the injury severity, statistical approaches such as BLR and OPM are recommended. On the other hand, to achieve better prediction performance, heuristic approaches such as SVM and DT are recommended. It is expected that the outcome of this study would be useful in developing various countermeasures for enhancing pedestrian safety.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.55-58
• /
• 2008

RFID(Radio frequency IDentification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a tush efficiency improvement effect was visible.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.25-32
• /
• 2007

In this paper, we propose the Group Separation Algorithm for RFID Tag Anti-Collision. We study the RFID Tag anti-collision technique of ALOHA and the anti-collision algorithm of binary search. The existing technique is several problems; the transmitted data rate included of data, the recognition time and energy efficiency. For distinction of all tags, the Group Separation algorithm identify each Tag_ID bit#s sum of bit #1#. In other words, Group Separation algorithm had standard of selection by collision table, the algorithm can reduce unnecessary number of search even than the exisiting algorithm. The Group Separation algorithm had performance test that criterions were reader#s number of repetition and number of transmitted bits for understanding tag. We showed the good performance of Group Separation algorithm better than exisiting algorithm.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.63-72
• /
• 2014

In this paper, characteristics and types of vehicle accidents involving buses that differ from common passenger cars are analyzed. When heavy vehicles are involved in collision accidents, the external impulse conveyed through bus tire from road surface cannot be ignored, so the conventional rigid-body impact model cannot be applied. As a solution, an analysis model which directly considers the tire impulse or considers the bus as moving barrier has been proposed. Also, as there are many instances in which the location of contact point or coefficients related to rotational motion cannot be estimated, utilization of point-mass collision model has been sought. By applying the proposed analysis model to an actual accident case and comparing with the result of the conventional analysis which does not consider the tire impulse, it is shown that the velocity of bus and other values close to the actual amount can be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.709-713
• /
• 2017

In urgent situations such as crashes, the integrity of an aircraft's fuel tank is directly related to the survivability of the crew. Thus, an external auxiliary fuel tank should be robust against bird strikes. In this study, a numerical analysis was carried out using impact analysis software to analyze the influence of bird strike on a composite container for an external auxiliary fuel tank. The structure was modeled as a shell element, and the fluid and bird were modeled by the particle method. The behavior of the internal fluid was also examined. The maximum stress, deformation, and strain of the composite container were also calculated.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.47-52
• /
• 2008

Important factor in designing a breakaway sign support is the velocity change of the impact vehicle. It is measured from the crash test or can be calculated by 3-D Finite Element Analysis. It can also be calculated with relative ease utilizing energy and momentum conservation. In this paper a formula to calculate the velocity change of a car during the time of impact against a small sign is derived utilizing the energy and momentum balance. Using the formula, parametric studies were conducted to find that impact speed, separation force and Breakaway Fracture Energy(BFE) of the posts which represent the degree of fixedness to the foundation are the important factor to vehicle's speed change. It is shown that speed change is larger in the lower speed impact and to the posts with large separation force and BFE.