• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.539-546
• /
• 2011

Traffic accident collision interpretation is composed of various shapes, and speed variations working to the vehicle during collision are utilized as a very important factor in evaluating collision degrees between vehicles and safety of passengers who got in the vehicle. So, methods of interpreting results on speed variations utilizing simulation programs on the collision interpretation become necessary. By the way, reliability evaluation on each program is being required because various collision interpretations simulations are spread widely. This study utilized collision interpretation programs such as EDSMAC and PC-CRASH adopting completely different physical approaches, and then carried out collision experiments of one-dimensional front and two-dimensional right angle while changing values of a lot of collision factors such as vehicle's weight, center of gravity, rolling resistance, stiffness coefficient, and braking forces among early input conditions. Also, the study recognized effects of collision factors to speed variations as output results during crashing. As a result of this research, two simulation programs showed same speed variations together on the vehicle's weight, center of gravity, and braking forces. Stiffness coefficient of the vehicle reacted to EDSMAC only, and rolling resistance coefficient did not affect any particular influences on speed variations. However, there appeared a bit comparative differences from the speed variation's values, and this is interpreted as responding outcomes by applying fixed properties values to each simulation program plainly. Therefore, reliability on analysis of traffic accident collisions shall be improved by doing speed analysis after taking the fixed value of simulation programs into consideration.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.35-46
• /
• 2006

When an RFID reader attempts to read the tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency simultaneously. These interferences cause the RFID reader collision. When the RFID reader collision occurs, either the command from the reader cannot be transmitted to the tags or the response of the tags cannot receive to the reader correctly, Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. Among those, Colorwave and Enhanced Colorwave is the reader anti-collision algorithm using the frame slotted ALOHA based a TDM(Time Division Multiplex) and are able to reduce the reader collision because theses change the frame size according to a collision probability. However, these can generate the reader collisions or interrupt the tag reading of other readers because the reader that collides with another reader randomly chooses a new slot in the frame. In this paper, we propose a new RFID reader anti-collision algorithm that each reader monitors the slots in the frame and chooses the slot having the minimum occupation probability when the reader collision occurs. Then we analyze the performance of the proposed algorithm using simulation tool.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.93-100
• /
• 2022

The collision behaviors of the tripod and jacket structures, which are considered as support structures for offshore wind towers at the Southwest sea of Korea, were compared by nonlinear dynamic analysis. These structures, designed for the 3 MW capacity of the wind towers, were modeled using shell elements with nonlinear behaviors, and the tower structure including the nacelle, was modeled by beam and mass elements with elastic materials. The mass of the tripod structure was approximately 1.66 times that of the jacket structure. A barge and commercial ship were modeled as the collision vessel. To consider the tidal conditions in the region, the collision levels were varied from -3.5 m to 3.5 m of the mean sea level. In addition, the collision behaviors were evaluated as increasing the minimum collision energy at the collision speed (=2.6 m/s) of each vessel by four times, respectively. Accordingly, the plastic energy dissipation ratios of the vessel were increased as the stiffness of collision region. The deformations in the wind tower occurred from vibration to collapse of conditions. The tripod structure demonstrated more collision resistance than the jacket structure. This is considered to be due to the concentrated centralized rigidity and amount of steel utilized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.93-100
• /
• 2014

IEEE 802.11 Wireless LAN Medium Access Control(MAC) supports two transmission methods, a DCF basic and a RTS/CTS in contention-based access. Even though the RTS/CTS method has been optionally introduced to solve the hidden terminal problem, it is able to produce better performance in some network environments than the basic transmission method. In this paper, the collision probability of wireless channel is mathematically analyzed and applied to measure network throughput using real transmission parameters so that a reference value between throughputs of two methods is obtained. We also confirmed that control signal rates affect overall network throughput and evaluated network throughputs considering collision probability, number of stations, and contention window size of Backoff between two methods respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.487-488
• /
• 2011

As the increase in maritime traffic and leisure, the marine accident risk has increased in the domestic coast. In this paper, we propose how to analysis for risk of collision between a small vessel and to close multiple vessels or obstacles using fuzzy logic in maritime. the speed of aboard vessel, the number of obstacle within radius 1km and the number of obstacle within 15 degrees left and right are considered as fuzzy sets.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.1-3
• /
• 2012

RIF(Rule Interchange Format)는 시맨틱 웹의 구조중 규칙 계층을 담당하며 기존에 사용되고 있는 여러 상이한 규칙 언어들 간의 호환을 위한 표준 규칙 언어라고 할 수 있다. RIF는 W3C에서 승인되었다. 시맨틱웹을 위한 표준 온톨로지 언어로는 RDF와 OWL이 있으며, 최근 RDF 데이터에 대한 접근제어 (Access Control) 메커니즘과 관련하여 일부 학술적 연구가 수행되었다. 본 논문에서는 RDF 데이터와 결합될 수 있는 RIF 추론 규칙에 대해 이미 제안한 RDF 접근제어 메커니즘을 확장하고자 한다. RDF 데이터에 대해 명세된 접근 권한은 RIF 추론에 의하여 권한 충돌이 발생할 수 있고, 그로 인해 접근 권한은 허용되지 않을 수 있다. 본 논문에서는 어떤 조건에서 이러한 RIF 추론에 의한 권한 충돌이 발생하는 지를 분석하며, 이미 제안한 그래프 레이블링을 사용하는 충돌 발견 방법이 RIF 추론과 관련하여서도 효율적임을 보인다. 실험에서는 제안된 방법이, 비록 포함관계 추론에 특화 되었지만, Chase 알고리즘에 기반한 다른 연구에서의 방법보다 발견 시간을 크게 감소시킴을 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.712-714
• /
• 2016

The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. The simulation results show that the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.642-648
• /
• 2019

Vessels sail according to the COLREG to prevent a collision. However, it is difficult to apply COLREG under special situation as heavy traffic, at this time personal skills of the operator are required. In this case, traffic control is required through the maritime traffic monitoring system. Therefore, maritime traffic management is globally implemented by VTS. In this system, VTS of icer uses the VTS system to assess risks and recommends possible safety operation to vessels with radio systems. This study considers that the risk analysis method with AI (Artificial Intelligence) technology from the operator's aspect. In addition, the research explains the Maritime Traffic Safety Monitoring System, Including AR (Augmented Reality) technology to increase vessel control efficiency. This system is able to predict hazards and risk priorities, and it leads to sequential elimination of dangerous situations. Especially, the hazard situations can be analyzed from operator's perspective of each vessel instead of the VTS officer's aspect, which is more practical than the conventional method. Furthermore, the result of analysis enables to comprehend quantitative hazardous areas and support recommended routes to avoid a collision. As a result, I firmly believe that the system will support to prevent a collision in complex traffic waters. In particular, it could be adopted as a collision prevention system for Maritime Autonomous Surface Ship, which occupies a significant proportion in Maritime 4th industrial revolution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3736-3741
• /
• 2015

Crash impact test is conducted to verify the crashworthiness of fuel tank. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. The failure of crash impact test can result in serious delay of a entire rotorcraft development because of the design complement and re-production of the test specimens requiring a long-term preparation. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error in the real test. Present study conducts on the numerical simulation of phase I crash impact test using SPH supported by crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the crash load on the skin material, overlap area and metal fitting is estimated to confirm the possibility of acquisition of the design load for the determination of the overlap area and adhesive strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.169-176
• /
• 2005

An analysis of the annual frequency of collapse(AF) is performed for each bridge pier exposed to ship collision. From this analysis, the impact lateral resistance can be determined for each pier. The bridge pier impact resistance is selected using a probability-based analysis procedure in which the predicted annual frequency of bridge collapse, AF, from the ship collision risk assessment is compared to an acceptance criterion. The analysis procedure is an iterative process in which a trial impact resistance is selected for a bridge component and a computed AF is compared to the acceptance criterion, and revisions to the analysis variables are made as necessary to achieve compliance. The distribution of the AF acceptance criterion among the exposed piers is generally based on the designer's judgment. In this study, the acceptance criterion is allocated to each pier using allocation weights based on the previous predictions.