• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.73-76
• /
• 2004

자동 부하 전환 개폐기는 일반적으로 주 전원의 전압 상태를 감시하여 주 전원의 정전이나, 저 전압 이 감지 될 때 주 전원을 개방시키고, 예비 전원으로 신속하게 전환 시킬 수 있는 구동 메커니즘이 필요하며, 주 전원이 정상 상태로 복구되면 다시 예비 전원에서 주 전원으로의 신속한 전환이 요구 되어진다. 본 논문에서 연구되는 자동 부하 전환 개폐기의 구동부는 1개의 구동력으로 2개 선로의 스위치를 동시에 조작하게 할 수 있는 링크 구조와 동작 원리를 간지고 있으며, 이 동작을 안정적이고 신뢰도 높게 조작하기 위해서 개폐기 구동부의 동특성을 구현할 수 있는 동적 모델로 검증하여 재작하였다. 보다 정확한 모델 수립을 위하여 기구 동작 시에 발생하는 부품들 사이의 충돌, 마찰, 유연성 등의 많은 동적특성들을 정밀하게 모사 할 수 있는 유연 다물체 동역학을 적용하였으며, 검증하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.589-594
• /
• 2004

현재까지 하천흐름의 동수역학적 해석을 위해 여러 가지 수치기법들에 대한 연구가 진행되고 발전되어져 왔다. 현재 국내에서는 주로 1차원 점변부정류 해석프로그램인 HEC-RAS 모형을 많이 사용하고 있으며, 대부분의 하천정비 기본계획 수립에 있어서도 1차원 해석모형을 적용하고 있다. 하지만 단순 하천이 아닌 합류부를 가진 하천이나 교량, 보 등의 다양한 수공구조물이 존재하는 경우 보다 정교한 흐름해석을 하기 위해 2차원 해석모형의 적용이 필요하다. 본 연구에서는 강원도 영월지역의 동강과 서강이 합쳐지는 합류부와 그 하류에 대한 영향을 알아보기 위하여 1차원 수치해석 모형인 HEC-RAS의 결과를 이용하여 2차원 수치해석 모형인 SMS의 RMA2 모델의 매개변수를 산정하였다. 2차원 수치모형을 이용하여 본 검토 유역의 빈도별 홍수량을 50년 빈도, 80년 빈도, 150년 빈도로 변화시키면서 대상구역의 유속변화를 검토하였다. 그 결과 합류부 지역에서 동강과 서강의 흐름이 충돌하면서 사수부가 발생하였고 유량이 많아질수록 그 사수부가 작아지는 경향을 보였다. 이를 바탕으로 앞으로 더 많은 CASE의 유량 및 하류수위를 변화시켜 수치모의를 하고 대상구역 내 구조물 설치 시 합류부의 유속 및 수위변화를 수치모의하여 모형실험 실시 시 예측 및 검토자료로서 활용할 것이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.123-128
• /
• 2011

Hull design for a small scale Oceanographic buoy will be introduced in this paper. The hull structure design, the connection methods between all parts will be discussed. We mainly introduce a design process of this buoy hull. We use walls with two layers and a radial bone structure to support the body to increase overall intensity and capacity to resist impact.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.258-260
• /
• 2018

해양관측부이는 해상에서 일어나는 기상현상, 해양의 변화 등을 관측하는 중요시설물로 주로 원거리 해상에서 운영되고 있다. 이러한 해양관측부이는 원거리에서 운영됨에 따라 Vandalism, 선박운항 부주의 등에 의하여 파손, 유실 등의 사고가 빈번하게 발생하게 되는데, 해양관측부이가 선박 충돌 등으로 인해 손상되면 운영여건 특수성에 의해 복구 및 교체 작업에 많은 시간과 비용이 발생하게 되며, 정위치 이탈 시 2차사고의 발생 위험성이 있다. 본 연구에서는 이러한 해양관측부이의 보호를 위하여 위성전송 파노라마 카메라 및 항로표지용 AIS 등의 장치를 활용하여 접근하는 선박을 감시하고, 상대 선박에는 위험경보를 인식하여 사고를 예방하며, 불가항력적인 사고 발생 시 운영자에게 이를 신속하게 알려 조기에 필요한 조치를 취하게 할 수 있는 방법과 시스템을 개발하였으며, 해당 시스템을 효율적으로 활용할 수 있는 방안을 제시하고, 개발한 시스템의 유용성을 검증한다.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.1-15
• /
• 2014

The Bobonaro m$\acute{e}$lange is one of the youngest syn-collisional m$\acute{e}$langes, located between the Indo-Australian and Eurasian plates. The m$\acute{e}$lange has formed in association with a collision between the Australian continental margin and the Banda arc initiated in Neogene. The Suai area at the southern part of Timor is a good place to examine the genetic relationship between the m$\acute{e}$lange and other rock sequences because various tectonostratigraphic units coexist in the area. In this study, we present the structural characteristics and spatial distribution of the Bobonaro m$\acute{e}$lange investigated as a part of 1:25K scale geologic mapping in the area, and discuss on the origin of the m$\acute{e}$lange. The Bobonaro m$\acute{e}$lange in the Suai area is composed of unmetamorphosed clay matrix and blocks of various lithologies. The clay matrix mainly is reddish brown or greenish gray in colour, and has scaly texture. Most blocks are allochthonous, but mostly derived from nearby formations. Based on the internal structure and relationship with surrounding rocks, the Bobonaro m$\acute{e}$lange is genetically classified into 1) diapiric m$\acute{e}$lange; 2) tectonic m$\acute{e}$lange; and 3) broken formation. The spatial distribution of the Bobonaro m$\acute{e}$lange indicates that it intruded all pre-collisional units including the lower Australian continental margin unit(Gondwana megasequence) and the Banda arc unit. Taking the field evidences and previous genetic models into consideration, the Bobonaro m$\acute{e}$lange is interpreted to be mainly formed as a diapiric m$\acute{e}$lange originated from Gondwana megasequence, consistently effected by faulting events. This study reflects that diapiric m$\acute{e}$lange is a significant component in recent accretionay-collision belts. It suggests that diapiric process should be considered as a main genetic factor even in ancient m$\acute{e}$lange.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.125-133
• /
• 2021

Purpose: The clinical outcomes were investigated to determine if arthroscopic management is a useful method for 19 hips with iliopsoas tendon impingement (IPI) after total hip arthroplasty (THA). Materials and Methods: Eighteen patients (19 hips), who complained of groin pain and flexion pain that persisted after THA from September 2013 to December 2019, were the subjects of this investigation. The mean time to manifestation after THA was four months (range, 1-9 months) in patients of an average age of 60 years (range, 50-69 years). Thirteen out of 18 patients underwent THA using the direct anterior approach and five by the lateral approach. IPI was diagnosed by the medical history, physical examination, blood test, radiographic examination using X-ray and computed tomography, and topical injection therapy. All patients underwent arthroscopic treatment and a dynamic arthroscopic physical examination after exposure to the iliopsoas tendon revealed impingement. Tenotomy was then performed on the muscle portion through the total tendon portion. Symptoms and pain levels of preoperative, postoperative and follow-up period were investigated and compared. Results: The Western Ontario and McMaster Universities Osteoarthritis Index score decreased from an average of 58.4 (range, 40-88) before surgery to an average of 35.0 (range, 15-76) after surgery. Similarly, the visual analogue scale decreased from an average of 4.0 (range, 2-6) before surgery to an average of 1.4 (range, 0-4) after surgery. Sixteen patients (88.9%) showed pain relief and improvement in the straight leg raise test, and two patients showed postoperative muscle weakness and sustained pain. In the follow-up period, muscle weakness improved. One patient underwent arthroscopic iliopsoas tenotomy at the lesser trochanteric level but the symptoms persisted. The clinical symptoms were improved after one more tenotomy at the joint level. Conclusion: Arthroscopic iliopsoas tenotomy performed in patients with IPI after THA showed good clinical results.

• Economic and Environmental Geology
• /
• v.46 no.5
• /
• pp.391-409
• /
• 2013

The Hongseong area of the southwestern Gyeonggi massif is considered to be part of suture zone that is tectonically correlated with the Qinling-Dabie-Sulu belt of China in terms of the preservation of collisional evidences during Triassic in age. The Wolhyeonri complex, preserved at the center of the Hongseong area, consists mainly of Neoproterozoic orthogneisses and Middle Paleozoic intermediate- to high-grade metamorphic schists, orthogneisses and mafic metavolcanics. The area includes various Middle to Late Triassic intrusives (e.g. dyke or stock). They are mainly monzonite and aplite with small intrusions of monzodiorit, syenite and diorite in composition. The SHRIMP U-Pb zircon ages yield 237 Ma to 222 Ma. The geochemistry of the studied Triassic intrusives show similar subuction- or arc-type signatures having Ta-Nb troughs, depletion of P and Ti, and enrichment of LILEs (large ion lithophile elements). In addition, the Triassic plutons in the Hongseong area, including those from this study, mostly possess high-K calc-alkaline to shoshonitic tectonic affinity. These results could be tectonically correlated to the post-collisional magmatic event following the Triassic collision between the North and South China blocks in China. Therefore, the Triassic plutons in the Hongseong area offer an important insight into the Triassic geodynamic history of the NE Asian region.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.60-64
• /
• 2005

Purpose: To describe the impingement of the osteophyte between the olecranon process and olecranon fossa and to understand the effect of removing the lesion on the elbow extension in heavy workers. Materials and Methods: Arthroscopy was performed to elbow of heavy industrial workers who complained painful limitation of elbow extension.6 patients(Teases) with average age of 43 year were selected. The average ROM showed flexion contracture of $17^{\circ}$ and further flexion of $87^{\circ}$. Results: In all cases, after the operation two months follow up, mean flexion contracture improved from $17^{\circ}\;to\;2^{\circ}$ with further flexion from$87^{\circ}\;to\;122^{\circ}$. After the operation 1 year follow up, the mean flexion contracture was $3^{\circ}$ and further flexion was $113^{\circ}$. Pain relief within acquired range of motion was achieved in all cases and there was no complication in this series. Conclusion: Selective removal of the impingement bony spur for treatment of flexion contracture in the patient with chronic cumulative trauma disorder patients appear to be effective method to control pain, recover joint movement and at] ow early rehabilitation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• The KIPS Transactions:PartA
• /
• v.11A no.6
• /
• pp.459-468
• /
• 2004

Sharing XML trees on mobile devices has become more and more popular. Optimistic replication of XML trees for mobile devices raises the need for reconciliation of concurrently modified data. Especially for reconciling the modified tree structures, we have to compare trees by node mapping which takes O($n^2$) time. Also, using semantic based conflict resolving policy is often discussed in the literature. In this research, we focused on an efficient reconciliation method for mobile environments, using edit scripts of XML data sent from each device. To get a simple model for mobile devices, we use the XML list data sharing model, which allows inserting/deleting subtrees only for the repetitive parts of the tree, based on the document type. Also, we use keys for repetitive part subtrees, keys are unique between nodes with a same parent. This model not only guarantees that the edit action always results a valid tree but also allows a linear time reconciliation algorithm due to key based list reconciliation. The algorithm proposed in this paper takes linear time to the length of edit scripts, if we can assume that there is no insertion key conflict. Since the previous methods take a linear time to the size of the tree, the proposed method is expected to provide a more efficient reconciliation model in the mobile environment.