• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.15-21
• /
• 1993

본 연구에서는 자동차 차체의 경량화 방안으로서 섬유강화 복합재료를 이용한 충격흡ㅅ수 구조재인 Side Member(측면부재)의 응용을 위한 시뮬레이션용 Box Tube의 충돌에너지 흡수특성 및 거동에 대해서 기존 금속 측면부재와 비교하여 논의해 보고자 한다. 1. 금속 충돌흡수 부재의 붕괴거동. 2. 복합재료 충격흡수부재의 붕괴거동.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.165-172
• /
• 1998

본 연구에서는 종이 충격흡수의 효율적인 기하형상이 연구되었다. 일반적으로 충격흡수재는 골판지, 스폰지, 종이, 고무등으로 제작된다. 에너지 흡수거동에 대한 종이 충격 흡수재의 보강형태, 크기., 재료 특성에 대한 영향이 ABAQUS/Explicit5.5에 의한 유한요소 해석과 미끄럼 충격시험을 통해 연구되었다. 종이 충격 흡수재의 최대 변위는 충격속도에 따라 증가하며, 내부단수에 따라 감소하였다. 충격이력 특성은 내부단수가 7단일 때 5 msee까지 급속히 변형되며, 그 이후에는 영구변형으로 존재한다.

• Composites Research
• /
• v.27 no.2
• /
• pp.42-46
• /
• 2014

In the present study, impact tests were carried out to investigate the crashworthy behaviour of the expanded polypropylene under the constant incident energy (100 J and 200 J) with five different combinations of striker mass and velocity. Also, preliminary quasi-static test was performed to obtain basic characteristics of the expanded polypropylene. MTS 858 and Instron dynatup 9250 HV were used for the quasi-static test and impact tests, respectively. In consequence, it was found that the impact energy absorption characteristics of the expanded polypropylene was more influenced by the striker mass instead of the velocity of the striker.

• Composites Research
• /
• v.13 no.6
• /
• pp.30-38
• /
• 2000

In this paper, a system of falling weight impact tester was built up to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates in consideration of stress wave propagation theory. Delamination area of impacted specimens for the different ply orientation was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the more absorbed energy. Hybrid specimen containing GFRP layer was higher than that of normal specimens.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.391-399
• /
• 2011

The purpose of this paper is to predict the shock absorbing characteristics of the aluminum honeycomb in a lunar lander. Aluminum honeycomb has been used for shock absorbers of lunar lander due to its characteristics such as light weight, high energy absorption efficiency and applicability under severe space environments. Crush strength of the honeycomb should have strength to endure during shock energy absorbing process. In this paper, the crush strength, which depends on the shape of honeycomb and impact velocity, is estimated using FEM. Ls-dyna is used for finite element analysis of the honeycomb shock absorber. The unit cells of the honeycomb shape are modeled and used for the finite element analysis. Energy absorption characteristics are decided considering several conditions such as impact velocity, foil thickness and branch angle of the honeycomb.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.28-31
• /
• 2007

자동차 측면충돌시 인체의 상해를 줄이기 위하여 도어 시스템 부품 중에 도어트림이 충격을 차단하고 인체를 보호하는 역할을 하고 있다. 차체 판넬이 변형되어 도어트림에 전달되는 충돌 에너지를 패드가 흡수 하는데 중대한 기능을 한다. 이전에 충격흡수 패드는 외곽부위의 수평면에 의존하여 설계되었으며 이 구조는 점진적으로 충격을 흡수 하는데 문제점이 발견 되었는데 트리즈의 6단계 창의성 기법을 적용하여 패드의 주요 특성을 찾아내고 그 특성에 모순을 해결하여 차종에 적용할 수 있는 기본 단면과 설계 자유도가 높은 충격흡수부재를 개발 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.74-74
• /
• 2004

탄소섬유강화 적층재(Carbon Fiber Reinforced Plastic, 이하 CFRP)는 강성도는 뛰어나지만 충격특성에는 취약한 단점이 있다. 따라서 충격저항과 충격에너지 흡수율이 상대적으로 우수한 유리섬유강화 적층재(Glass Fiber Reinforced Plastic, GFRP) 및 아라미드섬유강화 적층재(Aramid Fbier Reinforced Plastic, 이하 AFRP)를 CFRP 적용분야에 대체하고 점차적으로 피로특성을 개선시켜 나간다면 특성이 더욱 개선된 제품을 사용할 수 있을 것으로 판단된다.(중략)

• Composites Research
• /
• v.35 no.6
• /
• pp.469-476
• /
• 2022

In this paper, the microwave absorbing characteristics after the impact of the radar-absorbing structure (RAS) consisting of periodic pattern sheet (PPS) and glass fiber-reinforced plastic (GFRP) were experimentally investigated. The fabricated RAS effectively absorbed the microwave in the X-band (8.2-12.4 GHz). In order to induce the damage to the RAS, a low-velocity impact test with various impact energy of 15, 40, and 60 J was conducted. Afterward, the impact damage was observed by using visual inspection, non-destructive test, and image processing method. Moreover, the absorbing performance of intact and damaged RAS was measured by the free-space measurement system. The experiment results revealed that the delamination damage from the impact energy of 15 J did not considerably affect the microwave absorbing performance of the RAS. However, fiber breakage and penetration damage with a relatively large damaged area were occuured when the impact energy was increased up to 40 J and 60 J, and these failures significantly degraded the microwave absorbing characteristics of the RAS.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.1-9
• /
• 2001

Impact tests are performed on the high strength structural steel that is being developed for the submarine material. Especially, the impact characteristics of this structural steels at low temperatures are investigated by charpy impact testing. Hyperbolic tangent curve fitting method is used to evaluate the LSE(lower shelf energy), USE(upper shelf energy) and DBTT(ductile-brittle transition temperature). Proportional equations between charpy impact energy and lateral expansion are obtained using the test results. Effect of temperature on the fracture appearance is investigated by using SEM.

• Composites Research
• /
• v.26 no.3
• /
• pp.175-181
• /
• 2013

The evaluation and prediction for the absorbed energy, residual velocity, and impact damage are the key things to characterize the impact behavior of composite laminated panel subjected to high-velocity impact. In this paper, the method to predict the residual velocity and the absorbed energy of Carbon/Epoxy laminated panel subjected to high velocity impact are proposed and examined by using quasi-static perforation test and high-velocity impact test. Total absorbed energy of specimen due to the high-velocity impact can be grouped with static energy and kinetic energy. The static energy are consisted of energy due to the failure of the fiber and matrix and static elastic energy, which are related to the quasi-static perforation energy. The kinetic energy are consisted of kinetic energy of moving part of specimen, which are modelled by three modified kinetic model. The high-velocity impact test were conducted by using air gun impact facility and compared with the predicted values. The damage area of specimen were examined by C-scan image. In the high initial impact velocity above the ballistic limit, both the static energy and the kinetic energy are known to be the major contribution of the total absorbed energy.