• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.179-186
• /
• 2016

A study is to research crash barriers for vehicles that prevent road breakaway of vehicles and protect car passengers and pedestrians as absorbing impulse. Protection performance tests on vehicle passengers were simulated by using a LS-DYNA program. Through repetitive simulation on various speed and angles, passenger protection performance according to different impact condition was contemplated. Variable setting for the simulation was calculated as the mean weight of domestic car sales. By analyzing NASS (National Automotive Sampling System) of NHTSA (National Highway Traffic Safety Administration) of the U.S., the actual speed and collision angle section of accidents were computed. As a result, we confirmed that THIV (Theoretical Head Impact Velocity) and PHD (Post-impact Head Deceleration) are increased according to the impact speed and angle. Also, when the vehicle hit the guardrail post, we could be confirmed that the passenger protection performance greatly decreased.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.333-337
• /
• 2013

본 논문에서는 태양전지의 Ribbon 두께(A-type:0.2mm, B-type:0.25mm)에 따라 3가지 온도조건 ($-40{\sim}65^{\circ}C$, $-40{\sim}85^{\circ}C$, $-40{\sim}105^{\circ}C$)으로 열충격 시험을 수행하였다. 그 결과, A, B type 별 초기 평균효율은 15.2%로 같았다. 하지만, 열충격 시험(600 Cycle) 후 Condition 1에서 A-type 7.5%, B-type 7.7%, Condition 2에서는 8.6%, 13.2%를 나타내었다. Condition 3에서는 각각 11.6%, 19.9%의 감소율을 나타내었다. 열충격 시험 후 A-type보다 Ribbon두께가 두꺼운 B-type의 효율이 크게 감소하였다. 이는 A, B type 모두 이종재료 접합부의 금속간화합물(IMC)층이 형성되어 전기적 저항이 증대된 것으로 판단된다. 또한, B-type의 I-V 특성 곡선 및 EL을 분석한 결과, p-n층이 파괴되고, 병렬저항이 감소하여, 장기적 신뢰성에서 A-type 보다 더 취약한 것으로 나타났다. 향후 태양전지 Ribbon 형상에 따른 장기 신뢰성 특성에 대해 수치해석 및 시뮬레이션 분석이 수반되어야 할 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.3-10
• /
• 2013

Please In this paper, to cope with biased impulsive noise problems, a new information potential is proposed that can move the transmitted symbol points by modifying the information potential designed with Dirac-delta functions. Based on the proposed information potential a new blind algorithm is derived by employing an augmented filter structure. From the simulation results in the environment of biased impulsive noise, the conventional algorithms yield performance degradation by over 15 dB, but the proposed algorithm shows no performance degradation and holds the same steady state MSE of below -25 dB as after the initial convergence regardless of the channel conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.2
• /
• pp.190-196
• /
• 2018

Carbon fiber/epoxy composites are typical brittle materials and have low impact properties. Recently, it is important to investigate impact characteristics of carbon fiber composites because of increasing use as automobile parts and high pressure hydrogen vessels of fuel cell electric vehicles for light weight. In this study, the low velocity impact properties of carbon fiber/epoxy composites fabricated by a filament winding method are studied. The low velocity impact properties were measured by performing tests according to ASTM D7136. The low velocity impact simulations were carried out using commercial structural analysis software, Abaqus. The absorbed energy and the delamination shapes were compared between the experimental and simulation results. The numerical analysis method showed that the absorbed energy decreased with the reduced number of cohesive elements in the composite models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.26-32
• /
• 2013

Blind algorithms based on Information potential of output samples and a set of symbols generated in random order at the receiver go through performance degradation when biased impulsive noise is added to the channel since the cost function composed of information potentials has no variable to deal with biased signal. Aiming at the robustness against biased impulsive noise, we propose, in this paper, a modified information potential, and derived related blind algorithms based on augmented filter structures and a set of random-order symbols. From the simulation results of blind equalization for multipath channels, the blind algorithm based on the proposed information potential produced superior convergence performance in the environments of strong biased impulsive noise.

• Composites Research
• /
• v.25 no.6
• /
• pp.191-197
• /
• 2012

In this paper, the penetration behavior of carbon/epoxy composite laminates subjected to high velocity projectile impact was studied by numerical simulation. The composite laminates made of carbon/epoxy with $[45/0/-45/90]_{ns}$ stacking sequence and the spherical steel impactor were three-dimensionally modeled. The ply numbers of 16 and 24 and the impact velocities in the range of 140-250 m/s were considered. The analysis was performed using an explicit finite element code LS-DYNA. The residual velocity and the amount of damage were predicted and compared to the experimental results.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2008

The free-surface motions interacting with structures are investigated numerically using the Moving Particle Semi-implicit (MPS) method proposed by Koshizuka et al. (1996) for solving incompressible flow. In the method, Lagrangian moving particles are used instead of Eulerian approach using grid system. Therefore the terms of time derivatives in Navier-Stokes equation can be directly calculated without any numerical diffusion or instabilities due to the fully Lagrangian treatment of fluid particles and topological failure never occur. The MPS method is applied to the numerical study on the fluid impact loads for wet-drop tests in a LNG tank, and the results are compared with experimental ones.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.271-280
• /
• 2016

The need to accurate quantification of blast pressure loading in the near field is important because the focus of security design of critical infrastructure, buildings and bridges is for near-field detonations. Incident and reflected pressures for near-field detonations are very difficult to be measured by commercially available pressure transducers due to the high pressure and temperature, which requires a verified and validated computational fluid dynamics code to reasonably predict the near-field pressures and impulses. This paper presents numerical studies to verify and validate a CFD code for calculations of incident and reflected overpressures and impulses. The near field is emphasized and recommendations for mesh sizes to optimally simulate the near-field detonation are provided.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1131-1138
• /
• 2001

This paper concerns the crashworthiness of the widely used vehicle structure, the spot welded hat and double hat shaped section members, which are excellent on the point of the energy absorbing capacity and low production cost. The target of this paper is to analyze the energy absorption capacity of the structure against the front-end collision, and to obtain useful information for designing stage. Changing the spot weld pitches on the flanges, the hat and double hat shaped section members were tested on the axial collapse loads in impact velocities of 4.72m/sec, 6.54m/sec, 7.19m/sec and 7.27m/sec. To efficiently review the collapse characteristics of these sections, the simulation have been carried out using explicit FEM package, LS-DYNA3D. The solutions are compared with results from the impact collapse experiments.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.19-24
• /
• 2016

The minimum error entropy (MEE) algorithm is known to be superior in impulsive noise environment. In this paper, the optimum solutions and properties of the MEE algorithm are studied in regard to the robustness against impulsive noise. From the analysis of the behavior of optimum weight and factors related with mitigation of influence from large errors, it is revealed that the magnitude controlled input entropy plays the main role of keeping optimum weight of MEE undisturbed from impulsive noise. In the simulation, the optimum weight of MEE is shown to be the same as that of MSE criterion.