• The monthly packaging world
• /
• s.151
• /
• pp.99-101
• /
• 2005

접이식 구조로 충격 완화 및 압축 강도 높여

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.39-45
• /
• 1997

최근 우리 주변에는 기계, 구조물의 고속화 및 대형화에 따른 충격하중의 발생빈도가 급격하게 증가하고 있다. 따라서 이와 같은 충격하중을 받는 기계 및 구조물의 안전성 및 신뢰성 확보를 위하여는 먼저 충격하중 특성을 고려한 내충격 설계기법의 확립이 필요하다. 특히 충격하중의 경우 종래의 파괴역학적 관점에서 주로 다루어 왔던 정적하중 및 피로하중 하에서의 재료거동 특성과 달리 응력파의 전파특성이 재료의 충격강도 및 균열발생, 전파특성에 큰 영향을 미치기 때문에 이를 고려한 역학적 검토가 필요하다. 한편 이와 같은 충격하중이 반복적으로 작용하는 충격피로의 경우 지금까지 많은 연구로 내피로 설계기법이 확립된 일반 피로 특성과 달리 아직 그 주요 메카니즘이 규명되지 않은 부분이 많아 이 부분에 대한 체계적인 연구가 국내에서도 요구된다.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.131-141
• /
• 2004

The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.80-87
• /
• 2017

The performance of a pyrotechnic device that consists of donor/acceptor pair separated by a bulkhead relies on shock attenuation characteristics of the gap material and shock sensitivity of the donor and acceptor explosives. In this research, a micro Kapton flyer was accelerated by an exploding foil initiator (EFI) to figure out shock sensitivity of hexanitrostilbene (HNS) to impact. The averaged shock pressure and duration imparted to the explosive by flyer impact are measured by using a velocity interferometer for any reflector (VISAR) and impedance matching technique. Consequently, this research shows the possibility to determine the critical flyer velocity for initiating the miniaturized pyrotechnic unit by determining the relations between the impact velocity, the amplitude and width of impact loading.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.129-136
• /
• 2010

In this work, PLLA/EGMA blends were prepared by melt blending of biodegradable Poly-L-lactic acid(PLLA) with Poly(ethylene-co-glycidyl methacrylate)(EGMA) and Engage as impact modifiers by twin screw extruder. Blend compositions of PLLA/Impact modifier blends were 100/0, 75/25, 50/50, 25/75 and 0/100, respectively. Also, Talc was added to 3 PLLA rich phases on PLLA/EGMA blends. The morphology, viscoelastic/mechanical properties were characterized by FESEM, DMA, UTM and Izod impact tester. DMA and Izod impact test data showed that storage modulus at room temperature with increasing EGMA and Engage contents decreased, and impact strength increased. However, storage modulus at room temperature increased by adding talc. From FESEM image, we observed that domain phase was well dispersed into matrix. Although the tensile strength and flexural modulus were decreased with increasing the content of EGMA and Engage in them, they could be supplemented by adding talc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.322-327
• /
• 2020

An Armor Piercing Fin Stabilized Discarding Sabot (APFSDS), which penetrates and sabotages the target by physical energy, consists of a general penetrator using Depleted Uranium (DU) or Tungsten Heavy Alloy (THA) but THA is preferable because of manufacturing and environmental issues. On a THA penetrator, the penetration performance is determined mainly by self-sharpening depending on the hardness and toughness of materials. In particular, the tensile strength and impact strength work as key factors. The correlation coefficient for the penetration performance of the tensile strength was 0.721 and the impact strength was -0.599. The improved penetration performance by additional heat treatment was proven experimentally. Therefore, maintaining elongation over 9 % and tensile strength over 123 kg/㎟ is desirable, and the impact strength should be less than 6.8 kg·m/㎠ for good penetration performance.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.133-139
• /
• 1997

PC(polycarbonate), SAN(styren-acrylonitrile)공중합체, 그리고 충격 보강제를 근간 으로 하는 다성분계 고분자 블렌드에 대하여 고정된 사출조건에서 블렌드의 조성에 따른 weldline강도의 변화를 조사하였다. 블렌드의 전체적인 함량에 있어서 PC가 그함량이 높아 연속상이 되는 경우가 비교적 높은 weldline강도를 나타내지만 PC함량이 감소함에 따라서 급격한 저하가 발생하여 채-continuity의 성향이 강한 50%부근에서 최소 값을 보였다. PC 함량이 고정되었을 때에는 분산상의 점도가 증가할수록 weldline 강도가 향상되었는데 이는 weldline의 형성 시에 발생하는 분수형 흐름장에 의한 분산상의 배향이 억제되어 외부 응력 에 대하여 균일하게 대응할수 있는 형태학을 유지하는 효과로 설명된다. 충격보강제의 변경 과 상용화제의 적용으로부터 얻은 결과를 종합하여 볼 때 다성분계 고분자 블렌드의 weldline강도는 구성성분간의 상용성 뿐만 아니라 유변학적인 조건이 만족되어야 효과적으 로 향상될수 있다.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.22-29
• /
• 1997

본 논문에서는 균열이 존재하는 구조부재에 충격이나 폭발하중이 가해진 경우 동적응력확대계수를 구하는 방법들은 논의하고 특히 코오스틱 실험법 및 수치적으로 코오스틱 곡선을 구하여 동적응력확대계수를 구하는 과정을 자세히 설명하였다. 폭발 및 충격에 의한 구조물의 파괴해석은 이와 같은 하중을 받는 압력용기, 빌딩, 초고속선, 해군 함정 등의 파괴강도설계 및 안전성 평가에 핵심기술로 대두되고 있으며 또한 우주항공산업, 고속전철, 암반역학 등의 여러 분야에서 중요한 의미를 갖는다. 따라서 앞으로도 균열진전 및 정지조건, 탄소성 동적파괴해석 및 재료의 충격거동 등에 대한 연구들이 계속되어져야 할 것으로 사료된다.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.770-776
• /
• 2000

The effect of unreactive coupling agent on mechanical and thermal properties of talc-filled polypropylene (PP) composites was studied. Stearic and oleic acids were introduced as coupling agents, and tensile, flexural, and impact strength, thermal stability and melting transition temperature were measured and analyzed according to the types and concentration of coupling agents. Tensile and flexural strength were enhanced by introduction of coupling agent and the maximum effect was observed at the concentration of 3 wt% of coupling agent. Tensile and flexural strength of PP treated with oleic acid were higher than those of PP treated with stearic acid. but impact strength vice-versa. The reasons for these results were postulated by analyzing morphologies of talc-filled PP observed by SEM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1869-1876
• /
• 1992

The effect of particle property on FOD(foreign object damage) and strength degradation in structural ceramics especially, silicon carbide was investigated by accelerating a spherical particle having different material and different size. The damage induced showed significant differences in their patterns with increase of impact velocity. Also percussion cone was formed at the back part of specimen when particle size became large and its impact velocity exceeded a critical value. The extent of ring cracks was linearly related to particle size, however the impact of steel particle produced larger ring cracks than that of SiC particle. Increasing impact velocity the residual strength showed different degradation behaviors according to particle and its size. In the region the impact site represents nearly elastic deformation behavior, the residual strength was dependent upon the depth of cone crack regardless of particle size. However in elastic- plastic deformation region, the radial cracks led to rapid drop in residual strength.