• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.89-92
• /
• 2012

초음속 항공기를 설계하는데 있어서 일반적인 항공기와는 다른 성능이 요구되는데 그것은 바로 초음속에 의한 충격파가 발생시키는 추가적인 항력을 감소시키는 일이다. 날개의 Airfoil 형상을 결정하기 위해서는 공력 특성을 파악해야 하는데, 이를 알아보는 데 있어서 EDISON_CFD를 사용하였다. 충격파의 생성을 지연시키는 Supercritical Airfoil의 여러 형상에 필요한 격자를 생성하여 비점성, 압축성 유동 해석을 수행하였다. 비교에 필요한 다섯 개의 NASA Supercritical Airfoil을 선정하여, 아음속과 초음속으로 나누어 받음각에 따른 양력계수와 항력계수를 도출하고, 이를 토대로 양항비를 추정해 보았다. 추려진 것 중 가장 우수한 공력성능을 보이는 airfoil을 선정하였는데 그 결과 NASA SC-0403 airfoil의 공력 성능이 가장 뛰어나 그것을 선정하기로 하였고, 또한 2차원 공력 해석에서 얻은 양력계수를 면적에 대하여 적분하여 날개에서의 양력과 항력을 추정하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.1-8
• /
• 2014

Overexpanded flow of an axisymmetric thruster nozzle is numerically simulated to investigate effects of nozzle pressure ratio (NPR) on the shock structure and thrust performance. The Reynolds-averaged Navier-Stokes equations with k-${\omega}$ SST turbulence model are solved utilizing FLUENT solver. As the NPR is raised, thrust performance monotonically increases with the shock structure and flow-separation point being pushed toward the nozzle exit. It is also discussed that the flow structure at nozzle-exit plane which is immediately affected by a position of nozzle-interior shocks and expansion waves, has strong influence upon the thrust performance of thruster nozzle.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.58-58
• /
• 2003

• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.318-324
• /
• 2010

Dynamic properties of materials by shock loads such as rock blasting and earthquake are recently attracted in the design of aboveground and underground structures. The advance of measuring devices enables to obtain the whole histories of stress and strain in rock specimen of which the failure is completed in several hundred microseconds. The SHPB has been a popular and promising technique to study the dynamic behavior of rock. And the dynamic compressive, tensile and other test with this experiment system are planned to be Suggested Methods of ISRM. This technical paper is to introduced one study article which focuses the design of 3S (special shaped striker) to produce the half-sine wave to eliminate the problems of the rectangular wave. This article is also describing the advantage of half-sine incident wave and size effect of rock dynamic strength.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.336-340
• /
• 2017

When supersonic flow is through an internal duct, there forms a flow structure called pseudo-shock. Pseudo-shock is a result of shockwave-boundary layer interaction(SBLI) and to simulate pseudo-shock correctly, one needs to correctly anticipate not only the strength of the shock but also the boundary layer behavior as well. In this study, pseud-shockwave structure at a rectangular duct will be numerically simulated using dedicated inlet boundary conditions to obtain accurate solution in terms of its structure and pressure rise pattern.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.315-324
• /
• 2012

This paper presents a numerical investigation of the deflagration-to-detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene/air mixture as the combustible gas, considering geometrical changes by using obstacles and bent tubes. The model used consists of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment. Simulations with a variety of bent tubes with obstacles show the generation of hot spots through flame and strong shock-wave interactions, and restrained or accelerated flame propagation due to geometrical effects. In addition, the simulation results show that the DDT occurs with a nearly constant chemical heat-release rate of 20 MJ/($g{\bullet}s$) in our numerical setup. Furthermore, the DDT triggering time can be delayed by the absence of unreacted material together with insufficient pressures and temperatures induced by different flame shapes, although hot spots are formed in the same positions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.264-270
• /
• 2009

선진국 국립연구소에서만 개발하여 적용중인 hydrocode 또는 wavecode를 최근에 국내에서 C++언어로 ExLO를 개발하였다. 3차원 FEM을 적용한 본 코드의 가장 두드러진 특징은 Lagrangian/ALE/Eulerian solver 들을 모두 한 프레임에 내포하고 있어 적용범위에 따라 즉 변형양상에 따라 선택적인 해석 solver의 적용이 가능하다는 것이다. 즉 문제에 따른 (변형의 양상에 따른) 최적의 시뮬레이션 해석 solver 적용할 수 있다. 본 논문에서는 ExLO를 이용하여 고속 물체의 충돌, 파편의 구조물 관통해석 및 대기 중 Air-blast 충격파 전파해석, 물속에서의 수중폭발 충격파 생성 및 전파해석 등의 예제를 소개하고 그 신뢰성을 확인해 보고자 한다. 대체로 군사적인 적용이 많으나 차츰 민간분야의 다양한 방재현상 시뮬레이션에 적용이 가능할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.510-517
• /
• 2016

Supersonic jet technology using high pressures has been popularly utilized in diverse industrial and engineering areas related to working fluids. In this study, to consider the effects of a shock wave caused by supersonic jet flow from a high pressure pipe, the SST turbulent flow model provided in the ANSYS FLUENT v.16 was applied and the flow characteristics of the pressure ratio and Mach number were analyzed in accordance with the working fluids (air, oxygen, and hydrogen). Before carrying out CFD (Computational Fluid Dynamics) analysis, it was presumed that the inlet gas temperature was 300 K and pressure ratio was 5 : 1 as the boundary conditions. The density function was derived from the ideal gas law and the viscosity function was derived from Sutherland viscosity law. The pressure ratio along the ejection distance decreased more in the lower density working fluids. In the case of the higher density working fluids, however, the Mach number was lower. This shows that the density of the working fluids has a considerable effect on the shock wave. Therefore, the reliability of the analysis results were improved by experiments and CFD analysis showed that supersonic jet flow affects the shock wave by changing shape and diameter of the jet, pressure ratio, etc. according to working fluids.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.83-83
• /
• 2022

여러 분야의 연구자들이 지진해일의 위험에 대한 경각심을 가지고, 지진해일의 발생, 전파 그리고 수리현상을 해석하기 위해 많은 노력을 기울이고 있다. 해안지역에서 직접적인 피해를 입히는 지진해일의 충격파, 처오름, 월파, 침수 등에 관한 연구에 유사한 파형 특성을 가진 고립파를 많이 사용한다. 고립파는 비선형성과 분산이 균형을 이루는 가정에서 Korteweg-de Vries(KdV) 방정식을 만족하는 안정적인 이론파이다. 고립파의 파형분포는 수심에 의해 결정되고, 일정 수심 이상에서는 지진해일을 대신해 사용할 수 있다. 그러나 수심이 낮은 천해에서는 주기와 파장이 비현실적으로 짧아짐으로 지진해일을 대신하기에는 무리가 있다. 본 연구에서는 지진해일의 처오름 특성을 분석하기 위한 1:20 불투과성 경사면이 포함된 수치파동수조를 구성한다. 먼저, 일본 NOWPHAS(Nationwide Ocean Wave information network for Ports and HArbourS)의 관측자료를 이용하여 2011 동일본 지진해일과 고립파의 파형분포를 비교한다. 그리고 다양한 파형의 지진해일 생성할 수 있게 개발된 조파방법을 수치파동수조에 도입하여 수치해석을 수행한다. 수치해석결과, 지진해일의 처오름 높이가 고립파에 비해 최대 1.8배, 최소 1.13배, 평균 1.56배 증가한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.3
• /
• pp.1-13
• /
• 2021

Effects of the nozzle wall angles on the supersonic flow field in a thrust optimized nozzle were numerically investigated. The combustor and operating condition of 30-tonf rocket engine was selected to study the optimum nozzle shape. The nozzle flow of combustion products was realized by the shifting equilibrium calculation for the propellant of kerosene-LOx. The change of nozzle wall angles induced different developing patterns of the internal and secondary shock wave. The optimum nozzle was obtained when the internal shock was in a specific position at the nozzle outlet. The nozzle wall angles of the optimum nozzle were very similar to those of the optimum nozzle which does not consider the shock wave.