• 제목/요약/키워드: 충격응답스펙트럼

검색결과 36건 처리시간 0.022초

지진감시설비의 과도진동에 대한 원인 분석

  • 주광호;전규식;이종림
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(4)
    • /
    • pp.352-358
    • /
    • 1996
  • 원자력발전소의 지진에 대한 절대안전성을 확보하기 위하여 설치된 지진감시설비망에 과도진동이 유발되는 사례가 자주 발생하여, 이에 대한 원인을 분석하고 대책을 강구하는 연구를 수행하였다. 현재 울진1,2호기 배관상에 설치되어 있는 가속도계 및 응답스펙트럼기록기에 작업자의 실수로 인한 인위적인 충격이나 배관진동에 의해 과도한 진동이 발생할 수 있다는 개연성을 밝혀 내고 이러한 지진감시설비의 개선 및 적합한 설치장소에 대하여 의견을 제시할 수 있는 계기를 마련하였다.

  • PDF

과속방지턱 설치규격 검토를 위한 동역학적 분석 (Dynamic Analysis for Evaluation of Speed Control Hump Dimensions)

  • 심재수;최현규;김성민
    • 한국도로학회논문집
    • /
    • 제13권3호
    • /
    • pp.15-20
    • /
    • 2011
  • 본 연구는 과속방지턱의 설치규격 특성을 검토하기 위하여 동역학적 이론을 기반으로 분석을 수행하였다. 먼저 과속방지턱에 대한 현장조사를 통해 기하구조 자료를 수집하여 현행 설치기준과 비교 분석하였으며, 차량과 운전자를 일체화시킨 단자유도 모델링 방법을 이용하여 충격하중에 의한 변위응답 스펙트럼을 구하였다. 해석 결과 과속방지턱의 폭과 높이는 커질수록 운전자에게 미치는 심리적 부담감이 커지나 과도한 불편함을 초래하지 않도록 크기를 결정해야 하는 것으로 분석되었다. 또한 과속방지턱의 폭과 높이의 비율은 운전자가 느끼는 수직가속도의 크기를 지배하므로 폭과 높이의 조화도 고려하여 과속방지턱을 설치하여야 한다.

파이로 충격 모사 시험 장치 주요 매개변수에 따른 SRS 분석 (The Parametric Study of the Design Variables on the SRS of Pyroshock Resonant Bar)

  • 전현규;김문국;김민성;권영민;유예진;김인걸
    • 한국군사과학기술학회지
    • /
    • 제21권4호
    • /
    • pp.413-421
    • /
    • 2018
  • The pyroshocks can cause failure of electronics devices and structures. Metal-metal impact methods are utilized to simulate mechanical pyroshock, and to adjust the knee frquency of the SRS(Shock Response Spectrum) through resonant structures. In this paper, the major parameters of pyroshock simulation device which affect the SRS were examined. Through the Hertzian contact law and the modal characteristics of the resonant bar, it was found that the SRS is affected by the length and mass of a bar and various impact conditions such as velocity and mass of impactor. The characteristics due to the geometric parameters of a resonant bar was analyzed by performing FEA and also the resonant bar was designed and fabricated. Through the pyroshock simulation test, the characteristics of SRS due to the variation of impact parameters were examined.

동특성 분석을 통한 하우징의 구조건전성 평가 (The Evaluation of the Electronic Housing Structural Integrity Using Dynamic Analysis)

  • 이재은;최혜윤;김병준;이증;정오균
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.54-59
    • /
    • 2014
  • The rapid tactical operation and mobility are getting important to recently developed the guided weapon systems. And military wants multi-purposes equipment to carry the war more easily. So military wants to have the equipment that can apply without any distinction about environment. For this reason, the robust design is getting more important now to guarantee survivability of equipment. In this paper, we try to check about structural integrity of Fire Control Unit(FCU) which is one of the guided weapon system using dynamic FEM analysis.

  • PDF

다목적 실용위성 2호 충격 분리 시험 (Shock Separation Test of KOMPSAT-II)

  • 우성현;김홍배;문상무;김영기;김규선
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.1000-1005
    • /
    • 2003
  • The shock separation test simulates the environmental effects of the spacecraft separation from launch vehicle. The shock separation test for a structural model of KOMPSAT-Ⅱ(Korea Multi-Purpose SATellite Ⅱ) was performed in SITC(Satellite Integration & Test Center) launch environmental test hall at KARI(Korea Aerospace Research Institute) to verify the shock test requirement of the spacecraft, to predict the induced acceleration responses on the primary structures and payloads by the explosion of pyre-lock and to perform mechanical fit check. The spacecraft with S/A was mated vertically to LV(Launch Vehicle) adapter simulator via a clamp band, then hoisted and suspended above a foam test bed by four isolation springs secured to the spacecraft hoist fittings to isolate the payload platform shock wave from the sling elements. For separation process, real pyre-devices were used and the time response signals from 60 accelerometers installed on the interested points was acquired and recorded. The SRS responses for each response channels were calculated and the achieved SRS's on the separation plane was reviewed and evaluated in comparison to the ICD(Interface Control Document) value.

  • PDF

핸즈프리 전화통신을 위한 잔여반향제거 (Residual Echo Cancellation for Hands-Free Telephony)

  • 박선준;조점군;이지하;차일환;윤대희
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
    • /
    • pp.169-172
    • /
    • 2000
  • 본 논문에서는 차량 환경에서 핸즈프리 단말기를 위한 잔향반향제거 방법을 제안한다. 제안된 방법은 기존의 음향반향제거와 잡음제거의 결합구조에 근거하며, 음성신호의 스펙트럼 특성을 배경잡음화함으로써 잔여 반향제거 성능을 향상시킨다. 일반적으로 음향반향제거에서 실제 충격응답보다 적은 차수의 적응필터를 이용할 경우 잔여반향의 전력이 증가하며, 잡음제거기법을 적용하여 잔여반향성분을 줄일 수 있다. 음성신호가 입력되는 음향반향제거기의 잔여반향을 효과적으로 제거하기 위해 음성신호의 AR 스펙트럼에 따른 역필터링을 수행함으로써 잡음제거기에 의한 잔여반향제거 성능을 향상시킬 수 있다. 제안된 기법은 현재 상용화되고 있는 이동통신용 음성부호화기에 포함된 잡음제거기법과 결합하여 사용할 경우 매우 적은 부가 계산량만으로 구현할 수 있다.

  • PDF

비행체 탑재 회로카드 조립체의 내충격 향상을 위한 설계 (Design for improving the impact resistance of a vehicle equipped with the circuit card assembly)

  • 이창민;강동석;신영훈;이기선
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.48-53
    • /
    • 2014
  • Rocket, held using the CCA for the mission, a plurality of recording devices, and navigation equipment. In case of a projectile which is entered the water after fired into the air, after performing stages and fairing separated in flight to enter the underwater. It is caused by the explosion of gunpowder mainly, vibration phenomenon of a large transition is induced structurally very, also on entering the water, have a significant shock structurally separated. If shock is transmitted directly to the CCA through the body, it can be caused malfunction of payloads, resulting in failure of the mission of the projectile. In order to ensure the stability against shock, in this paper, Calculating a target resonacne frequency of the CCA, and verified through modal test and analysis. Maximum acceleration position of CCA is checked by SRS analysis. In addition, effectiveness of shock isolation system through shock analysis.

  • PDF

LNG 연료 추진선의 연료 탱크로서 탱크컨테이너의 적용성 연구 및 구조설계 (A Study and Design on Tank Container for Fuel Tank of LNG Fueled Ship)

  • 김태우;서용석;장기복;전민성;이강대;차경호
    • 대한조선학회논문집
    • /
    • 제49권6호
    • /
    • pp.504-511
    • /
    • 2012
  • The objective of this study is to investigate tank container to be used as fuel tank for LNG fueled ship. Feasibility of tank container to the fuel tank of LNG fueled ship is addressed and the advantage of tank container as fuel tank of ship is investigated. Conceptual configuration of the tank container is designed as well as structural analyses based on finite element method are carried out to meet the design regulation suggested by shipping register. Static loading is considered by structural analysis and impact test is performed. It is necessary to require SRS(shock response spectrum) in order to investigate structural safety which can meet.

충격반향기법을 이용한 화해를 입은 고강도 콘크리트의 탄성파 특성 (Characteristics of Elastic Wave in Fire damaged High Strength Concrete using Impact-echo Method)

  • 이준철;이창준;김화중;이지희
    • 한국화재소방학회논문지
    • /
    • 제29권1호
    • /
    • pp.1-6
    • /
    • 2015
  • 본 연구에서는 충격반향기법을 이용하여 화해를 입은 고강도 콘크리트의 화재손상정도를 평가하였다. 100 MPa급의 고강도 콘크리트 시편을 제조하여 $100{\sim}800^{\circ}C$의 고온에 2시간 동안 노출한 후 충격반향기법의 응답스펙트럼을 이용하여 시편의 탄성파 속도를 측정하였으며, 이를 이용하여 동탄성계수를 산출하였다. 이후 직접 압축강도 실험을 통해 시편의 잔존압축강도와 정탄성계수를 측정하였다. 실험결과, 노출되는 온도가 높을수록 탄성파의 속도, 동탄성계수, 잔존압축강도, 정탄성계수가 저하되는 경향을 나타냈으며, 탄성파 속도와 압축강도, 동탄성계수와 정탄성계수는 선형적인 상관관계를 나타냈다. 따라서 충격반향기법을 이용하여 화해를 입은 고강도 콘크리트의 화재손상정도를 평가하는 것이 가능하다고 판단된다.

충격 햄머 실험에서 다자유도 주파수 응답 스펙트럼의 개선 (An Enhancement of Multi-Dof Frequency Response Spectrum from Impact Hammer Testing)

  • Ahn, Se-Jin;Jeong, Weui-Bong
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.363.2-363
    • /
    • 2002
  • The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. (omitted)

  • PDF