• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.198-202
• /
• 2009

Split Hopkinson pressure bar(SHPB) is used to obtain compressive stress-strain data and deformation characteristics of brittle materials such as rock and concrete. SHPB demands both dynamic stress equilibrium condition and nearly constant strain rate before the failure of the specimen. Pulse shape technique, which places a thin metal disk between launched impact bar and incident bar, should be adopted to satisfy both conditions. In this study, metallic disks with various shapes were used to control the incident impact wave. The results show that the peak value of stress and the length of waves increased with decreasing thickness and diameter of the pulse shaper. In order to investigate shape and strain rate-dependency of the pulse shapers, dynamic compressive stress-strain curves were obtained and analyzed.

• Explosives and Blasting
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2020

The measurement technique with dynamic shock sensor was widely used in academic experiment for blasting and impact. However, most of dynamic sensors are expensive so that it needs to be protected by external housing structures or damping devices. In this study, the calibration method for dynamic shock sensor under the distortion by external structures. Hopkinson pressure bar system was adopted to measure the input acceleration to the sensor, and it was compared to the acceleration measured by accelerometer with customized damping device. Consequently, it is conclued that this method can be useful to calibrate the dynamic shock sensor under the linear distortion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.791-799
• /
• 2016

To ensure the reliability and safety of various mechanical systems in accordance with their high-speed usage, it is necessary to evaluate the dynamic deformation behavior of structural materials under impact load. However, it is not easy to understand the dynamic deformation behavior of the structural materials using experimental methods in the high strain-rate range exceeding $10^4\;s^{-1}$. In this study, the Taylor bar impact test was conducted to investigate the dynamic deformation behavior of metallic materials in the high strain-rate region, using a high-speed photography system. Numerical analysis of the Taylor bar impact test was performed using AUTODYN S/W. The results of the analysis were compared with the experimental results, and the material behavior in the high strain-rate region was discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.129-136
• /
• 1995

본 연구에서는 핵연료봉의 여러가지 모양형태에 대한 충격실험과 해석을 통해 비선형해석 code의 해석모델에 대한 검증을 수행하였다. 이 두 결과의 비교를 통해 개발된 모델은 다중 span을 갖는 보나 봉의 비선형충격해석에 충분히 사용될 수 있음을 확인하였다. 이러한 모델을 통한 비선형충격해석시 주의해야 할 점은 자유진동해석시의 고유진동수를 찾기 위한 경계조건을 정확히 하는 것이 중요하며, 또한 충격해석시의 정확한 충격등가스프링비를 결정하는 것이 중요하다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.78-89
• /
• 1993

A new theory based on the modified momentum and energy conservation has been proposed in order to overcome the drawbacks included in previous theories which are used for the determination of dynamic yield stresses and the investigation of dynamic behavior of metals. Then the improvements suggested by the new theory have been manifested through the analysis of the error included in the measurement of deformed length and through the comparison between the new theory, existing theories, and experimental results performed by previous workers. Meanwhile rod impact test has been performed which uses a compressed- air system for the acceleration of flat-ended cylindrical free-cutting brass rods. From the geomtrical measurements of deformed length, the dynamic yield stress of free-cutting brass has determined.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.147-154
• /
• 1998

강체 충격자가 납 표적에 33m/s ∼ 141m/s의 속도로 충돌할 때의 침투특성을 연구하기 위하여 Jognson 이론식을 이용한 이론해석과 AUTODYN 코드를 이용한 수치해석 및 실험장치를 이용한 실험측정을 실시하고 그 결과들을 비교 분석하였다. 실험장치로는 가스압력식 발사장치를 설계 제작하였으며, 실험용 충격자로는 충돌부위 형상이 반구형인 반구형 충격자와 원추형인 원추형 충격자 2종류를 사용하였다. 또한, 납재료에 대한 동적 유동응력을 얻기 위하여 홉킨스 압력봉실험을 수행하였다. 침투특성에 관한 연구결과, 이론적 해석결과는 저속 충돌범위(반구형 충격자 : 53m/s, 원추형 충격자 ; 73m/s)에서 실험결과치와 93%이상 잘 일치하였으며, 수치해석결과는 전체적인 충돌속도 범위에서 반구형 충격자인 경우 73%이상, 원추형 충격자인 경우 86%이상 일치하였다.

• KDI Journal of Economic Policy
• /
• v.9 no.1
• /
• pp.111-115
• /
• 1987

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.143-151
• /
• 2023

In this paper, a method for evaluating the measurement uncertainty is proposed when measuring of floor impact sound insulation of buildings using standard heavy impact source. In addition to the effect of repeated measurements, several other factors such as measurement location, impact location, equipment used for sound pressure measurement, and heavy impact source, were considered. A mathematical model for the average maximum impact sound level and the uncertainty evaluation method for each factor were proposed. The present proposed method was applied to measurement results to evaluate the average maximum impact sound pressure level and the measurement uncertainty.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.608-610
• /
• 2011

본 논문에서는 자동차의 도어의 충격봉의 형상에 따른 변형률과 최대응력을 ANSYS Workbench환경을 이용해 원형, 반원형, 모자형 개단면, 정사각형 등의 단면 형상에 따른 변형량 특성을 측정해 본 결과 변형률은 모자형 개단면 모델이 가장 적은 변형률을 가지는 것으로 나왔으며, 무게가 30%정도 적게 나가는 반원형도 두 번째로 적은 변형률을 가지는 것으로 나타났다. 최대응력의 경우는 반원형이 가장 적은 최대응력 값을 가지는 것으로 나왔고, 변형률과는 다르게 중심부 보다는 충격봉과 프레임의 연결부위에서 최대응력이 발생하는 것을 알 수 있었다. 이를 통해서 충격봉의 중심부는 변형률 및 응력이 다른 부분에 비해서 크게 작용하므로, 중앙부위의 단면계수가 높아야 한다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.435-440
• /
• 2004

The nonlinear impacts between the Control Element Drive Mechanisms (CEDMs) seismic cap plates installed on the CEDM top of a pressurized water reactor are studied with the dynamically reduced models of the CEDM and Integrated Head Assembly (IHA). It is important to develope nonlinear models considering the gap effects between the plates. In order to simulate impacts, reduced models for the primary structures, such as CEDM and IHA, are developed through simplifying detailed models, and the nonlinear structural analysis is performed under seismic loading conditions. The responses are examined in various gap sizes depending on the reactor operating conditions.