• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.23-31
• /
• 2002

The headway of vehicles entering an intersection is closely related with the saturation flow rate and is a basic parameter required for determining the saturation headway and the start-up lost delay. Since such headway value reflects the drivers' behaviors and features of the intersection, all intersections don't have an equal value, but are affected by number and location of their lanes, changing types, local characteristics and time zone. Accordingly, this study attempted to suggest proper values on the basis of data by investigating headway in lanes. Number of exclusive through lanes was divided into single lane, double lanes and triple lanes, the locations of lanes were divided into inside lane, central lane and outside lane. As a result of investigating the headway, single through lane, double through lanes-inside lane, and triple through lane-outside lane showed as 1.73 sec., 1.71 sec. and 1.93sec., respectively. The result of calculating the area factor of business areas by fixing 1.00 for the residental area and applying relation between headway and saturation flow rate was 0.96. In the case of start-up lost delay lead dual left turn and directional separation were 1.41 sec. and 3.27 sec., respectively, showing the great difference. Therefore, different start-up lost delay according to changing type should be applied.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.9-22
• /
• 1998

본 연구는 U턴 효율적 운영에 필요한 기초자료 즉, U턴 이동류에 대한 차두시간, 출발손실시간, 승용차 환산계수 그리고 포화교통류율을 산정하였다. 또한 다중 U턴 횟수, U턴 허용 길이별 U턴 용량 특성을 분석하였다. 연구결과를 보면, U턴 평균 차두시간은 2.43초이고 이에 따른 포화교통율은 1,480(pcph)로 분석되었다. 출발손실은 두 번째 차량까지 손실이 있어 1.57초로 산정 되었다. 승용차 환산계수는 대형차 혼입율에 따라 1.98에서 1.35사이에 분포하며 평균값은 1.78이다. 그리고 주기당 다중 U턴 횟수가 많을수록 포화교통류율이 커졌으며 횟수가 1회, 2회 및 3회일 때 포화교통류율이 각각 1,600, 1,650 및 1,800pcph로 나타났다. U턴 허용 길이가 늘어나면 포화교통류율이 늘어나며 18m, 21m 및 30m로 증가될 때 1,570, 1,610, 및 1,640pcph로 증가하는 것이로 분석되었다.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.57-65
• /
• 2011

After heated discussion, National Police Agency decided not to install Red Arrow signal at such major intersections as Gwanghwamoon, Sejongro. The major issues can be summarized in the following reasons. The one is the conflict of color and symbol (red means STOP and arrow means PROGRESS), and it would confuse drivers and may cause traffic accident. The other includes high replacement cost. This paper delivered how much red arrow signal would affect (1) drivers start up delay time, (2) saturation flow rate and (3) vehicle headway. The result showed that there was no statistical difference in those even when a red arrow signal is placed.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.31-39
• /
• 2002

The primary objective of this study is to develop a reliable method for estimating the left turn capacity at the signalized intersection. This study is performed during periods of congestion. Multi left turn lane(bay lane and exclusive lane) approaches are examined. When more than one left turn lane exists, traffic volumes are not distributed equally over each lane. The fundamental approach taken in this study is measuring headways on left turn lanes with altering the bay length from 20m to 120m. Left turn lane is divided into 3 sub-sections in this study. These are SLP section(start-up lost time Period), SFP section(saturation flow period), LSP section(lane selection period). Saturation flow rates are evaluated for each sub section periods. As a results of analysis, it has been confirmed that the left turn capacity can be estimated by left turn bay length and effective green time for left turn. The left turn bay length adjustment factor is suggested in this study.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1383-1389
• /
• 2009

This paper describes an Energy Efficient Timetabling Problem(EETP). In these days, the researches on development of an energy efficient railway systems are highlighted over the world. The departures occurred in an electrical power feeding circuit at the same time are necessary to be reduced as far as possible, to minimize the energy consumption. The paper addresses the operational requirements and facility restrictions to construct a mathematical model for EETP. In addition, it suggests several types of objectives for the model.

• Information Display
• /
• v.4 no.4
• /
• pp.14-19
• /
• 2003

CRT용 Glass 산업의 경우, 금형 및 유리의 온도는 매우 중요한 변수이다. 이 온도는 상온에서 출발한 금형이 반복되는 Heat Cycle을 거치면서 안정화 상태로 이르게 되는 과정을 거치면서 결정된다. 이때 안정화되는 금형의 온도분포에 의해 제품의 품질이 결정됨에 따라, 불량이 발생할 경우, 안정화 시간 및 금형수정 Cost 증가 등 매우 큰 손실이 야기된다. 이에 본 연구는 CAE를 통하여 상기 Heat Cycle의 해석과정 중에서, I-DEAS의 MACRO인 "Program file"을 이용하여 Modeling 및 Meshing을 수행하여 단시간 내 정확한 Preprocessing을 통해 유동 및 열 해석에 적용하는 자동화 프로그램을 개발하였다.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.83-89
• /
• 2007

When allocating traffic signal at the signalized intersection, minimum green time and clearance time for bicyclists should be significantly considered in order to enhance safety aspects to bicyclists when crossing intersections, especially where intersections with exclusive bicycle paths that are physically separated from pedestrians. In this study, field measurements related to bicycle crossing time, including minimum peen time and clearance time, were collected and analyzed according to bicycles crossing types at the signalized intersections where high rate of bicyclists exists. Three types of bicycle crossing are defined as follows 1) stopping: completely stop before crossing (at least one foot on found) 2) riding: crossing with riding bicycle 3) pulling: crossing without riding bicycles. Minimum green time based on pedestrian speeds should be used as crossing time in this case. For bicyclists, speed of bicycle that is applicable to estimate the minimum green time is in the 1.36m/sec($15^{th}$ percentile) to 1.60m/sec($25^{th}$ percentile) range in case of its stopping. Also it is in the 0.75($15^{th}$ percentile) to 0.87($25^{th}$ percentile) range for pulling at crosswalk. In addition, speed of bicycle to consider for calculating the clearance time is in the 2.51m/sec($15^{th}$ percentile) to 2.79m/sec($25^{th}$ percentile). These values also resulted from $15^{th}$ percentile or $25^{th}$ percentile speeds of riding. The results of this study are expected to be supported in traffic signal allocation process, reflecting bicyclists' characteristics.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.213-220
• /
• 2008

A MANET is an autonomous, infrastructureless system that consists of mobile nodes. In MANET, on-demand routing protocols are usually used because network topology changes frequently. The current approach in case of broken routes is to flag an error and re-initiate route discovery either at the source or at the intermediate node. Repairing these broken links is a costly affair in terms of routing overhead and delay involved. Therefore, this paper propose a NAODV(Neighbor-aware AODV) protocol that stands on the basis of an AODV. It sets up the route rapidly if it operates for setting the route directly by using sequence number of neighbor nodes without re-search the route when the route to destination node is broken. Also, it reduces loss of packets. We use NS-2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio and average end-to-end delay. Also, when the proposed protocol is applied to the large ad-hoc network with multiple nodes, the performance is more efficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.607-614
• /
• 2016

In generating station, cable spreading design is a very important task, which is very much time consuming, due to the type of cable used in generating station is very diverse. The raceway means the cable line section from source equipment to destination, and consists of cable tray and conduit. The process of existing cable spreading design was written in by hand. Thereby, there are grossly inefficient gain such as cable omission and unfixed fill value by a personal and time investment. In this paper, we proposed and implemented the automated cable route design based flexible cable fill check in generating station, and proposed the automated cable route design can be calculated the cable fill with flexible changing of raceway. Some experimental result shows that implemented cable route design is well performed and conducted as the design specifications, and it will be able to reduce the cable spreading design time.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1681-1698
• /
• 2011

According to the demands of the times, Inchon international airport railroad opened up step by step but It is situation that much government subsidies are paid because It does not competitive power with road traffic by decline of schedule speed. Inchon international airport railroad users will convert by other transportation and minimize damage their time as travel time is prolonged. Therefore, need high speedization of airport railroad, this may act big role competitive power security as well as airport railroad activation with another public transportation. Thus, this paper suggests that a high speedization possibility section in the sections of airport railroad and train speed elevation effect analysis by roadbed, railroad, system improvement and the most efficient operation intervals analyzing each vehicles (AREX (120km/h), KTX (230km/h), EMU(Electric Multiple Unit, 180km/h) train running pattern.