• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.71-80
• /
• 2005

This paper proposes a new circuit topology of the half-bridge resonant inverter and presents its digital control scheme. As the proposed half-bridge inverter can be operated in the load-freewheeling modes, pulse width modulation (PWM) control method can be used for the output power control. The proposed half-bridge inverter can keep unity output displacement factor under the load-impedance varying conditions, if a new PWM control scheme based on the resonant frequency tracking algorithm is adopted. In this paper, the operation principle, electrical characteristics and detailed digital control scheme of the proposed half-bridge resonant inverter and loss analysis comparing with a conventional half bridge inverter is described. The experimental results of the proto-type experimental setup to verify the validity of the proposed half-bridge resonant inverter are presented and discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1796-1803
• /
• 2006

This Paper describes a systematic method for designing the $H_{\infty}$ controller for the inverted pendulum which is a nonlinear and single-input double-outputs system. In particular, the open-loop system is conbined with a pre-filter to shape the open-loop transfer function for the sensitivity function ind the complementary sensitivity function to be kept the desirable frequency characteristics. Consequently, the loop shaping technique of the open-loop transfer function reduces the impacts of the model uncertainties, measurement noises and exogenous disterbances on the dynamic characteristics of the inverted pendulum. The results of simulation and experiment show the efficiency of the proposed control method comparing with conventional PID control method.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.332-333
• /
• 2011

본 논문에서는 15V, 1kW 저전압 연료전지를 위한 고효율 전력변환장치를 제안한다. DC-DC 컨버터로는 15V에서 380V로의 고승압에 적합한 입력병렬 출력직렬 부스트 하프브리지를 제안하였는데 이는 전부하영역에서 ZVS 턴온으로 96%의 최고 효율을 달성하였다. 또한 DC-AC 인버터부는 상용전원으로의 변환 및 DC 링크 전압 제어를 수행한다. 1kW급 시작품을 제작하여 그 성능을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.3
• /
• pp.133-141
• /
• 2002

Most maximum power point tracking(MPPT) control algorithm is based on Perturb and Observe(P&O) and Incremental Conductance(IncCond). In comparison with P&O and IncCond algorithm, the dynamic and tracking characteristic of IncCond algorithm is better than P&O algorithm in condition of rapidly changing solar radiation. But in the case of digital implementation, the InCond algorithm has error en decision of maximum power operation point(MPOP). To solve this problem, this paper proposes a improved IncCond algorithm, which can determine the MPOP correctly by inserting the test signal in control input. This paper proposes a novel MPPT control algorithm for the digitally implemented photovoltaic system in condition of rapidly changing solar radiation. To verify the validity of the proposed control algorithm. the computer simulation and experiment are carried out.

• Nuclear Engineering and Technology
• /
• v.17 no.2
• /
• pp.105-115
• /
• 1985

The axial height-dependent transverse buckling is derived from 3-dimensional depletion file in steadystate conditions. For transient conditions a physical correlation is developed based on the linear relationship existing between the responses of in-core and ex-core detectors. The use of this model greatly improves the reliability of a 1-dimensional diffusion theory program in Predicting the axial power transients accompanying large variations of control rod positions.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.451-452
• /
• 2014

본 논문에서는 단상 계통연계형 컨버터의 전원 위상각을 추종함에 있어 필수적인 전압 센서의 옵셋 오차에 대한 영향을 분석하고 이를 검출 및 보상하기 위한 알고리즘을 제안하였다. 전원전압 측정에 따른 옵셋 오차는 전원 주파수의 1배 맥동을 야기하여 전원 위상각이 왜곡된다. 왜곡된 전원 위상각에 의한 좌표변환시 동기 좌표계 dq축 전류에 전원 주파수 1배의 맥동을 야기하며 이는 계통측 상전류에 직류성분과 전원 주파수 2배의 고조파 성분을 발생시키게 된다. 따라서, 본 논문에서는 전원측정시 야기되는 옵셋 오차의 영향을 분석하고 이의 검출신호로 전원 위상각 제어기의 적분출력을 선정하였다. 또한 RMS(Root Mean Square) 기법을 이용하여 옵셋 성분을 검출 및 보상하는 알고리즘을 제안하였다. 제안된 알고리즘의 성능은 시뮬레이션과 실험을 통하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.480-481
• /
• 2012

본 논문에서는 태양광 발전 시스템에서 발생하는 저차 고조파를 저감하는 기법을 제안한다. 태양광 발전 시스템에 포함된 단상 인버터는 기본파의 2배 주파수를 가지는 2차 고조파를 만들어낸다. 이 저차 고조파는 컨버터 전류의 리플로 작용하여 태양전지의 출력을 최대로 높이는 최대전력점 추종기법의 효율을 저감시킨다. 본 논문에서는 계통연계형 태양광 발전 시스템에서 발생하는 저차 고조파를 분석한다. 그리고 추가적인 하드웨어 소자 없이 비례공진 제어기를 사용한 새로운 전향보상 성분을 통해 효과적으로 제거한다. 제안된 알고리즘은 시뮬레이션을 바탕으로 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.31-32
• /
• 2015

본 논문에서는 전하 균등화를 해주는 동시에 차동전력조절 방식(Differential Power Processing, DPP)을 추가하여 최대 전력점(Maximum Power Point, MPP)을 추종하는 회로를 제안한다. 이를 통하여 본 논문에서는 PV모듈을 제어를 하고, 동시에 벅-플라이백 컨버터를 이용하여 전하 균등화를 할 수 있다. 본 논문에서의 전력조절기는 포워드컨버터로 구성 되어 있고, 주 컨버터인 전하균등화회로는 벅-플라이백컨버터로 구성하였다. 컨버터의 입력은 PV모듈을 직렬로 연결, 출력은 배터리를 직렬로 연결하여 제안한 기능을 구현하였다. 이에 따른 조건을 수식으로 증명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.694-699
• /
• 2012

This paper proposes a new sensorless speed control scheme of permanent magnet DC motor using a numerical model and hysteresis controller, which requires neither shaft encoder, speed estimator nor PI controllers. By supplying the identical instantaneous voltage to both model and motor in the direction of reducing torque difference, the rotor speed approaches to the model speed, namely setting value and the system can control motor speed precisely. As the numerical model whose electric parameters are the same as those of the actual motor is adopted, the armature rotating speed can be converged to the setting value by controlling torque on both sides to be equalized. And the hysteresis controller controls torque by restricting the torque errors within respective hysteresis bands, and motor torque are controlled by the armature voltage. The experiment results indicate good speed and load responses from the low speed range to the high, show accurate speed changing performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.909-915
• /
• 2014

Terminal voltage of the Automatic Voltage Regulator(AVR) of brushless synchronous generator is generally being controlled by PID Control way in shore and ship field. However, in case of changeable large load on power system, PID control method is deficiency to respond output voltage with settling time. Hence, taking into consideration this situation, it is required new control method. In this thesis, we propose Fuzzy Logic Control(FLC) which has more optimal robust control way in order to respond varying values of terminal voltage to the brushless synchronous generator through simulation of MATLAB/SIMULINK and prove Fuzzy logic control more optimal compared with PID control.