• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.284-294
• /
• 1992

합성용질확산법으로 GaP단결정을 성장시키고 몇가지 성질을 조사하였다. 정지상태에서 결정의 성장속도는 1.75[mm/day]이었고 결정성장용 석영관을 전기로내에서 하강시키므로써 양질의 GaP 단결정을 성장하였다. 에치피트밀도는 결정의 성장축 방향으로 3.8*$10^{4}$[$cm^{-2}$]부터 2.3*$10^{5}$[$cm^{-2}$] 까지 증가하였다. 성장된 GaP결정의 이동도와 캐리어농도는 실온에서 197.49[$cm^{2}$/V.sec]와 6.75*$10^{15}$[$cm^{-3}$]이었고 77K의 온도에서는 266.91[$cm^{2}$ /V.sec]와 3.13*$10^{14}$[$cm^{-3}$]이었다. 에너지갭의 온도의존성은 실험적으로 $E_{g}$(T)=2.3383-(6.082*$10^{-4}$) $T^{2}$/(373.096+T)[eV]로 구하여졌다. 저온에서 측정된 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났고 얕은 준위의 Si도너와 Zn억셉터준위 사이에서의 복사재결합 및 이에 대한 1LO, 2LO의 포논복제가 나타났으며 S $i_{Ga}$ -S $i_{p}$의 쌍방출에 의하여 1.8932[eV]에서 넓은 반치전폭의 피크가 나타났다. GaP의 적외선 흡수는 TO, LO, LA, T $A_{1}$, T $A_{2}$ 포논들의 이중결합모드와 G $a_{2}$O의 진동모드 및 Si도너와 Zn억셉터들에 의하여 일어났다. Zn를 확산시키어 제작한 p-n GaP발광다이오드는 실온에서의 발광중심피크가 6250[.angs.]이었고 최대광출력은 0.0916[mW], 양자효율은 0.51%이었다.이었다.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.127-133
• /
• 1995

A Series of meta and para-substituted phenyl N-methylcarbamate derivatives were synthesized and influence of substituents(X) on the molecular orbital(MO) quantities of carbonyl group, carbamylation reaction center, and insecticidal activities($pI_50$) were discussed quantitatively. From these findings, the most stable streo conformer(Z) shows that the planer phenyl group occupies vertical(${\theta}=90^{\circ}$) position on the plane of the N-methylcarbamyl group. The carbamylation mechanism was proposed that the carbamylation process of acetylcholinesterase(ACh.E) by m-methyl substituted phenyl N-methylcarbamate derivatives proceeds via hyperconjugation of m-methyl group and carbonyl oxygene protonation, theromodynamically control reaction with acidic site of ACh.E.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.73-86
• /
• 1995

The transducer section of the forward-looking ultrasound imaging catheter (FLUIC) consists of a circular piezoelectric element as a vibrator and a conical acoustic mirror as a perfect reflector. A small diameter piezoelectric transducer element is mounted on the side of a catheter's rotating shaft. The unique design of FLUIC provides the capability to form a two-dimensional image of a cross-section of vessel in front of the catheter, which is lacking in the present generation of intravascular ultrasound (IVUS) transducers, as well as a conventional side view image. The mirror configuration for the transducer section of the FLUIC is designed using an approximated ray tracing techniques. The diffraction transfer function approach [1] developed for the field prediction from primary sources is generalized and extended to predict the secondary diffraction characterstics from an acoustic mirror. The extended model is verified by simulation and experiment through a simple plane reflector and employed to analyzed the field characteristics of a FLUIC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.148-148
• /
• 2013

스퍼터 이온펌프(Sputter Ion Pump)는 주로 화학흡착으로 동작하며 기계적 진동이 없고, 기름 등의 오염 물질을 배출하지 않으며, 수명이 길어 초고청정 진공이 요구되는 표면실험장치, 표면분석계, 입자가속기 등에서 널리 사용 되고 있다. 일정한 지름을 갖는 다수의 원통 양극과 그 양단에 두개의 음극판을 배치시킨 후, 양극과 음극 사이에 수 kV의 전압을 걸고 원통의 축방향으로 자장을 인가하면 페닝 방전이 발생한다. 냉음극에서 방출된 전자는 양극으로 비행하면서 가스를 이온화한다. 이온분자는 가스흡수성 게터재료로 된 음극에 충돌하여 스퍼터링을 일으키며 게터막를 주변에 증착시킨다. 이온 및 중성 가스는 게터 고체막 속에 주입 포획되는 형태로 배기된다. 스퍼터 이온펌프는 $10^{-5}$ Pa 부근에서 최대 배기속도를 가지며, 압력이 낮아질 수록, 특히 $10^{-10}$ Pa영역 이하에서는 그 배기속도가 급격히 저하되며, $10^{-10}$ Pa영역에서는 배기능력을 거의 상실한다. 따라서 스퍼터 이온펌프 단독으로 진공시스템을 배기할 때 도달압력은 $10^{-9}$ Pa 영역에 머무르게 되며, $10^{-10}$ Pa 이하의 극고진공을 얻기 위해서는, $10^{-8}$ Pa 이하의 압력에서 배기 속도가 압력과 무관한 흡착펌프(getter pump)와 이온펌프를 조합하여 사용한다. 본 실험에서는 $600^{\circ}C$ 이상의 온도로 진공로에서 탈개스시킨 진공용기를 배기속도 450, 60, 30, 20, 5, 3 l/s의 6종류의 이온펌프와 배기속도 400 l/s, 100 l/s의 non-evaporable getter (NEG) 펌프를 조합시켜 배기하여 그 배기 특성을 비교하였다. 도달 압력은 이온펌프의 배기속도가 클수록 낮아지는 경향을 보여주었다. 450 l/s 이온펌프와 400 l/s NEG를 조합하여 배기시킬 때 도달 압력은 ~$2{\times}10^{-10}$ Pa을 기록하여 가장 낮았으며, 3 l/s 이온펌프와 400 l/s NEG를 조합하였을 때는 $ 2{\sim}3{\times}10^{-8}$ Pa을 기록하였다. 450 l/s 이온펌프와 400 l/s NEG를 조합한 경우 잔류가스의 대부분이 수소였으나, 3 l/s 이온펌프와 400 l/s NEG의 조합한 경우에는 메탄의 잔류량이 수소 보다 많았다. 이 결과는 메탄을 배기하지 못하는 NEG의 배기 특성을 보완하기 위해서는 일정 배기속도 이상의 이온 펌프가 필요함을 보여준다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.17-18
• /
• 2014

Wave energy generation system is sorted as oscillating water chamber type, over topping device type and wave activating body type. The wave activating body type converts from wave energy to kinetic of the machine one and the power generation amount increases while the motion of a activating body increases. In this paper the wave energy convertor consists of a main body which has a generation system and the activating body. They are connected by a bar type bridge. The twisting moment and angular velocity at a shaft of convertor are calculated when various condition of the incident wave, a diversity of connection methods between the main body and the activating body. It can be used as basic idea for determining the design of wave activating body type convertor.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.260-269
• /
• 2014

Transition tracks are an alternative for enhancing the long-term serviceability and durability of concrete track components in railway bridges. The goal of this paper is to investigate the structural behavior for transition track systems of railway bridge deck ends. In this study, the structural behavior of transition tracks such as the variations in static, dynamic, and fatigue behaviors and dynamic properties (natural frequency and damping ratio) are assessed and compared through performing loading tests and finite element analyses using actual vehicle impact loadings. As a result, it is found that the structural behavior of the transition track system is expected to satisfy the actual vehicle impact loading, and the variation in the neutral axis and dynamic characteristics are not affected by the fatigue loading. Therefore, it is inferred that the structural capacity and long-term durability of the transition track system is proven.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.371-377
• /
• 2020

Combustion instability occurred in the combustion test of solid rocket motor with large aspect ration Length/Diameter (L/D) and cylinder-slot grain. As a result of spectral analysis of the pressure perturbation, it was confirmed that the central axis longitudinal frequency was dominant, so that the length of the cylinder part was increased to eliminate the coincidence with acoustic node. In addition, acoustic modal analysis and flow analysis were performed to analyze the cause of instability by unsteady flow structure in solid rocket motors. It was confirmed that the combustion instability is reduced by quantitative comparison of the amplitude and frequencies of the pressure inside the combustion chamber using the grain shape before and after the design change. Finally, a combustion test was performed to verify that the combustion instability was resolved as in the flow analysis.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.29-36
• /
• 1990

Cholesteryl pentyl carbonate $(C_{33}H_{56}O_3)$ is monoclinic, space group P21, with a = 12.484(3), b = 9.043(3), c = 14.053(3)$\AA$, ${\beta} = 94.12(2)^{\circ}$ and z = 2. The intensity data were measured for the 2969 reflections within sin $\theta/\lambda = 0.52 {\AA}^{-1}$, using an automatic four--circle diffractometer and graphite monochromated Mo-K$\alpha$ radiation. The atomic coordinates from cholesteryl octanoate were used in an initial trial structure and the structure was refined by full-matrix least squares methods. The final R-factor was 0.12 for 1164 observed reflections. The pentyl group has shortened bond lengths due to the high thermal vibrations in this region. Adjacent molecules are related by $2_1$ screw axis so that they are arranged in an antiparallel array, corresponding to the Monolayer Type II packing mode. There are close packings of cholesteryl groups within the monolayers. This packing type is similar to those of cholesteryl hexanoate, octanoate, hexyl carbonate and oleate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.29-37
• /
• 2000

Because the previous design procedure for the composite wind turbine blade structure using trial and error method takes long time, a improved design procedure by using the program based on classical laminate theory was proposed to reduce the inefficient element. According to the improved design procedure, limitation of strains, stresses and displacements specified by international standard specification IEC1400-1 for the composite wind turbine blade were applied to sizing the structural configuration by using the rule of mixture and the principal stress design technique with a simplified turbine blade. Structural safety for strength and buckling stability was confirmed by the developed analysis program based on the laminate theory to minimize the design procedure. After modifying the preliminary design result with additional structural components such as skin, foam sandwich and mounting joints, stresses, strains, displacements, natural frequency, buckling load and fatigue life were analyzed by the finite element method. Finally these results were confirmed by comparing with IEC1400-1 specification.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.131-136
• /
• 2011

In this study, a compact wireless vibration measurement system was developed using a 3-axial accelerometer in order to evaluate the vibration stimulation system. A low power microprocessor chip integrated with 2.4 GHz RF transceiver was used for the wireless data communication. To evaluate the system, the frequencies and accelerations from the vibration stimulation system were measured using an LVDT sensor and a vibration measurement system. The average frequency difference by the measurement system was less than 0.1 Hz, and the standard deviation of frequencies estimated by the LVDT sensor and the accelerometer was below 0.08 Hz. The developed system was applied to access a vibration stimulation system for the future study. The average acceleration difference of the central and peripheral point of the stimulation system was less than 0.0005 g(1 g=9.8 $m/s^2$), and the standard deviation of the acceleration was below 0.004 g, which shows the usefulness of the wireless vibration measurement system.