• Spatial Information Research
• /
• v.4 no.1
• /
• pp.83-92
• /
• 1996

The inventory maps of landslide deposits show where landsliding has occured in the past., and serve as a general guide to slope stability. Isopleth maps derived from those inventory maps, provide an economi¬cal means for the recognition of landslide activity and assessing the degree of landslide hazard in a large area, es¬pecially rural areas. GIS could generalize the methods of hazard assessment by means of isopleth mapping of landslide deposits. Isopleth maps of Secheon and Boreong areas, where the degree of landslide hazard is very high, show the mitigation of landslide activities remarkably by the remedial efforts during the period of 1978-1991.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.371-376
• /
• 2015

In this study, we use 1:1, 1:2, and 1:4 scale zig-zag shape acoustic metamaterial structure to achieve broad and effective sound blocking at the subwavelength scale. The SPL(Sound Pressure Level) results show that the SPL loss of the scaled metamaterial slab in series is a superposition of individual SPL losses. Also, we show that the metamaterial tailors the material properties to achieve high impedance and high refractive index using effective medium theory. Our results show that broad and effective sound blocking is possible at the subwavelength scale just by scaling acoustic metamaterial.

• Water for future
• /
• v.25 no.3
• /
• pp.65-77
• /
• 1992

The purpose of this study is to analyse existing hysteresis models and to propose a new type of model. The existing hysteresis models are classified by three types: interpolation model, scaling model and domain model, of which the domain model is based on the theoretical approach. Models which need one branch of hysteresis loop for calibration are developed based on the independent domain concept, however, they are not successful to accurately simulate the real data and Rubicon Sandy Loam and Dune Sand. There is a possibility that a new model is based on the dependent domain model considering the pore blockage effect against air entry for homogeneous porous media(modelIII-1, Mualem, 1984). Concludingly, a new type of hysteresis model is proposed by simplifying ModelIII-1 using a proper assumption.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.822-826
• /
• 2009

홍수터에 식재된 수목에 의한 운동량 교환은 흐름의 추가적인 흐름저항으로 작용한다. 따라서 수목으로 인한 통수능의 감소로 부분적인 유속 상승이 발생하기도 하지만, 전반적으로 평균유속이 감소하며 수위는 상승하게 된다. 실무적 사용목적으로 홍수터 수목의 저항은 통합 매개변수인 합성조도계수가 사용되고 있으나, 정량적인 조도계수의 추정은 매우 어려운 문제이다. 본 연구에서는 경험적으로 추정되는 비정량적 합성조도 계수의 한계를 극복하고, 실무적으로 사용이 용이하도록 수목에 의한 흐름저항 항을 분리한 1차원 상류이송 음해기법이 개발되었다. 개발된 기법의 평가를 위하여 균일한 단면에서 수행된 수리실험에 적용하였으며, 다양한 유량규모 및 식재조건에서 제안된 기법의 적용성 및 정확성을 확인하였다. 불규칙한 단면형상을 가진 실제 하천의 홍수터에 식재된 수목군의 경우를 가정하여 1/25 정상축척의 수리실험을 실시하였고, 100년 빈도 홍수량에서 수목식재 전후의 실측결과를 개발된 수치기법으로 계산하여 비교하였다. 개발된 기법은 모든 경우에서 사용자의 주관적인 판단 없이 정확하면서 안정적인 해를 제공하였으므로, 흐름의 2차원 효과가 상쇄될 수 있는 광폭의 자연하천에서 수목의 식재기준 분석을 위한 대안으로 사용될 수 있을 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.9-15
• /
• 2005

This paper describes the test carried out on an experimental study of fuselage drag and stability characteristics of a helicopter configuration and the test techniques developed for the testing and the lessons learned in the Agency for Defense Development Low Speed Wind Tunnel(ADD-LSWT). The main objective of this test is to determine the drag and stability characteristics of helicopter configurations according to the various configuration changes. The fuselage model with a highly modular structure is a representation of 1:8 scale of the external contour of the conceptual design helicopter configuration with rotating main rotor hub including blade stubs capable of rotating up to 500 rpm. The test results are compared with the available similar data and fair to good agreement is obtained.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.87-97
• /
• 2006

LIDAR(Light Detection and Ranging) is a new technology for obtaining DEM(Digital Elevation Model)ewith high density and high point acuracy. As LIDAR emerged, DEM could be developed in the earthsurface more efficiently and more economically, compared to the conventional aerial photogrametry.In this study, a digital camera is simultaneously used in combined LIDAR surveying, and acquired digitial image and DEM produce digital orthoimage. In this process, methods of combining sensor andorthoimage, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; onewith a few GCP and the other without them. The produced maps can be used to corect or revised1:1,000 or 1:5,000 scale maps acordingly.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.3
• /
• pp.193-201
• /
• 2023

A developed code based on the unified conservation laws of incompressible/compressible fluids is applied to analyze similarity in pressure oscillations caused by pulsating air pockets in sloshing tanks. It is shown that the nondimensional time histories of pressure show good agreements under Froude and geometric similarities, provided that there are no pulsating entrapped air pockets. However, the nondimesional period of pressure oscillation due to the pulsating air pocket becomes longer as the size of the sloshing tank increases. The discrepancy in the nondimensional period is attributed to the compressibility bias of the entrapped air. To get rid of the compressibility bias, the ullage pressure in a sloshing tank is adjusted based on the Bagnold's impact number. The variation in the period of pressure oscillation according to the ullage pressure is explained based on the spring-mass system. It is shown that the nondimensional period of pressure oscillation is virtually constant when the ullage pressure is adjusted based on the Bagnold's impact number, regardless of tank size. It is found that the Bagold's impact number should be the same, if the time history of pressure is important while an entrapped air pocket pulsates.

• Composites Research
• /
• v.17 no.4
• /
• pp.7-17
• /
• 2004

In this study, the effect of laminate thickness on the compressive behaviour of composite materials is investigated through systematic experimental work using the stacking sequences, $[O_4]_{ns},{\;}[45/0/-45/90]_{ns}$ and $[45_n/0_n/-45_n/90_n]_s$ (n=2 to 8). Parameters such as fibre volume fraction, void content, fibre waviness and interlaminar stresses, influencing compressive strength with increasing laminate thickness are also studied experimentally and theoretically. Furthermore the stacking sequence effects on failure strength of multidirectional laminates are examined. For this purpose, two different scaling techniques are used; (1) ply-level technique $[45_n/0_n/-45_n/90_n]s$ and (2) sublaminate level technique $[45/0/-45/90]_{ns}$. An apparent thickness effect existes in the lay-up with blocked plies, i.e. unidirectional specimens ($[O_4]_{ns}) and ply-level scaled multidirectional specimens ($[45_n/0_n/-45_n/90_n]_s$). Fibre waviness and void content are found to be main parameters contributing to the thickness effect on the compressive failure strength. However, the compressive strength of the sublaminate level scaled specimens ($[45/0/-45/90]_{ns}$) is almost unaffected regardless of the specimen thickness (since ply thickness remains constant). From the investigation of the stacking sequence effect, the strength values obtained from the sublaminate level scaled specimens are slightly higher than those obtained from the ply level scaled specimens. The reason for this effect is explained by the fibre waviness, void content, free edge effect and stress redistribution in blocked $0^{\circ}$ plies and unblocked $0^{\circ}$ plies. The measured failure strengths are compared with the predicted values.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.5-14
• /
• 2007

The quantity of noxious wastes generated by the growth in industrialization and population in all over the world and its potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. Incorporated technique with PVDs have been used for dewatering from fine-grained soils for the purpose of ground improvement by means of soil flushing and soil vapor extraction systems. This paper is to evaluate several key parameters that affected to the performance of the PVDs specifically with regard to: well resistance of PVD, zone of influence, and smear effects. In the feasibility of contaminant remediation was evaluated in pilot-scale laboratory experiments. Well resistance is affected on the vertical discharge capacity of the PVDs under the various vacuum pressures. The discharge capacity increases consistently in areal extents with higher applied vacuum up to a limiting vacuum pressure. The head values for each piezometer at different vacuum pressures show that the largest head loss occurs within 14 cm of the PVD. Air flow rates and head losses were measured for the PVD placed in the model test box and the gas permeability of the silty soils was calculated. Increasing the equivalent diameter results in a decrease in the calculated gas permeability. It is concluded that the gas permeability determined over the 1,500 to 2,000 $cm^3/s$ flow rates are the most accurate values which yields gas permeability of about 3.152 Darcy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2002

DEM(Digital Elevation Model) is used widely in image processing, water resources, construction, GIS, landscape architecture, telecommunication, military operations and other related areas. And it is used especially in producing ortho-photo based on specific DEM and developing 3D GIS database vividly. As LiDAR(Light and Detection And Ranging) system emerged recently, DEM could be developed in urban area more efficiently and more economically, compared to the conventional DEM Production. Traditional method using check points for elevation has tome limitations in structure's height accuracy by LiDAR, because it uses only terrain height. Accordingly after the downtown of Chungju city was selected as a test field in this paper and DEM and digital ortho images was produced by way of LiDar survey, the accuracy was evaluated through analytical plotting map. The result shows that in case of buildings in LiDAR DEM, the accuracy is 0.30 m in X, 0.62 m in Y and RMS is 1.17 m. The difference distribution between DEM and plotting map in range of $\pm$10 cm was 36.2% and $\pm$10 cm $\pm$20 cm was 43.53%. The accuracy of LiDAR in this study meets 1/5,000 which is the regulation for map of NGI(National Geography Institute) and LiDAR can be possibly used in many other applied area.