• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.389-397
• /
• 1998

A loop duct system is often found in a VAV-HVAC(variable air volume heating, ventilating and air conditioning) design. It is known that the simple T-method is not be applicable to the loop duct system and cannot be used to calculate the flow rate and the pressure drop at each duct section of the loop duct system. In this paper, the extended T-method has been developed and it is found to be applicable to the loop duct system to which the simple T-method cannot be applied. The validity of the extended T-method has been verified by using to solve for a simple, ideal loop duct system for which there exists analytical solution. In addition, the extended T-method is employed to compute the loop duct system of a real building with an area of 380$m^2$. The results show that the computed flow rate at the exit differs from the designed flow rate by a range of -13.6~43.5 %. Consequently, three design factors must be adjusted in order that the flow rate may be balanced. These include the duct sizes, in terms of their lengths and diameters, the sub-duct locations and the positioning of damper which is found upstream of the exit duct.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.842-845
• /
• 2009

본 연구에서는 신 에너지전원(태양광)이 배전계통에 연계되어 운용되는 것을 상정하여, 정상상태와 비상(사고)상태, 전력품질(순시), 스마트배전설비 등에 대한 배전계통의 특성 및 신 에너지전원의 특성을 시험하고 분석할 수 있는 분산전원용 계통연계 시뮬레이터를 제작하고 평가하기 위하여, 배전계통 전용해석 S/W인 PSCAD/EMTDC를 이용하여 사전 시뮬레이션을 수행하여 설계를 수행하고, 시험결과를 분석하였다. 본 연구에서 제작한 시뮬레이터는 배전용변전소(154/22.9KV)의 주변압기와 3상 4선식 22.9KV 고압배전선로의 2개 선로 및 부하를 축약형태(약 1/100)로 모의한 것이지만, 주상변압기(13,200/380/220V) 이하의 저압 배전선로는 실계통과 거의 동일한 상태로 모의한 것이다. 이상의 구성요소 데이터를 산출하기 위하여 PSCAD/EMTDC를 이용하여 사전 시뮬레이션을 수행하여 설계 및 제작을 수행하고 그 효용성을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.246-253
• /
• 2013

This paper addresses the technology of active flow control for stabilizing a flow field. In order for flow field modeling from the control point of view, the huge-data set from CFD(computational fluid dynamics) are reduced by using a POD(Proper Orthogonal Decomposition) method. And then the flow field is expressed with dynamic equation by low-order modelling approach based on the time and frequency domain analysis. A neural network flow estimator from the pressure information measured on the surface is designed for the estimation of the flow state in the space. The closed-loop system is constructed with feedback flow controller for stabilizing the vortices on the flow field.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.229-241
• /
• 2001

Using eighteen texts from various genera of present-day Japanese, I collected phonologically reduced forms frequently observed in conversational Japanese, and classified them in search of a unified. explanation of phonological phenomena. I found 7,516 cases of reduced forms which I divided into 43 categories according to the types of phonological changes they have undergone. The general tendencies are that deletion and fusion of a phoneme or an entire syllable takes place frequently, resulting in the decrease in the number of syllables. From a morphosyntactic point of view, phonological reduction often occurs at the NP and VP morpheme boundaries. The following findings are drawn from phonetical observations of reduction. (1) Vowels are more easily deleted than consonants. (2) Bilabials ([m], [b], and [w]) are the most likely candidates for deletion. (3) In a concatenation of vowels, closed vowels are absorbed into open vowels, or two adjacent vowels come to create another vowel, in which case reconstruction of the original sequence is not always predictable. (4) Alveolars are palatalized under the influence of front vowels. (5) Regressive assimilation takes place in a syllable starting with [r], changing the entire syllable into a phonological choked sound or a syllabic nasal, depending on the voicing of the following phoneme.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.1
• /
• pp.9-16
• /
• 2003

To evaluate the seismic performance of multistory building structures use an equivalent SDOF model to represent the resistance of the structure to deformation as it respond in its predominant mode. This paper presents a method of converting a MDOF system into an equivalent SDOF model. The principal objective of this investigation is to evaluate appropriateness of converting method through perform nonlinear time history analysis of a multistory building structures and an equivalent SDOF model. The hysteresis rules to be used an equivalent SDOF model is obtained from the pushover analysis. Comparing the peak inelastic response of a moment resisting reinforced concrete frames and an equivalent SDOF model, the adequacy and the validity of the converting method is verified. The conclusion of this study is following; A method of converting a MDOF system into an equivalent SDOF model through the nonlinear time history response analysis is valid. The representative lateral displacement of a moment resisting reinforced concrete frames is close to the height of the first modal participation vector \ulcorner$_1{\beta}$${_1{\mu}}=1$. It can be found that the hysteresis rule of an equivalent SDOF model have influence on the time history response. Therefore, it necessary for selecting hysteresis rules to consider hysteresis characteristics of a moment resisting reinforced concrete frames.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.86-97
• /
• 2006

For the design of DC traction power supply system at new Light Rail Transit(LRT) construction, it is very important to determine system configuration, location and power capacity of substation. However, a LRT system consists of a number of subsystems such as train movement, power supply and traction drives, which inevitably contains many complexities and diversities. The objective of this paper is to clarify and systematize the design procedure and its assessment for the electrification system of a LRT line. This paper discusses in detail our approach to system design and its assessment. The whole DC-feeding network configuration, characteristics of a train, and design method of substation arrangements is thoroughly investigated for the design. As a result of the investigations, the design procedure is clarified and systematized and a computer program for the design and evaluation of the system is developed using the most suitable iterative method with nodal equation. To verify the proposed design and its assessment procedure, case studies for the DC traction power supply system of a planed Korean LRT line are performed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1098-1103
• /
• 2013

A low-noise amplifier(LNA) using series RLC matching network and resistive feedback at 8 GHz is presented. Inductive degeneration is used for the input matching with which the proposed LNA shows quite a wide bandwidth in terms of $S_{21}$. An equivalent circuit model is deduced for input matching by conversion from parallel circuit to series resonant circuit. By exploiting the resistive feedback and series RLC input matching, fully integrated LNA achieves maximum $S_{21}$ of 8.5 dB(peak to -3 dB bandwidth is about 3.5 GHz) noise figure of 5.9 dB, and IIP3 of 1.6 dBm while consuming 7 mA from 1.2 V supply.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1384-1388
• /
• 2009

래스터 기반 DEM 모델을 이용한 수문지형인자의 산정은 DEM의 해상도(셀크기)에 영향을 받으며, 이러한 DEM의 해상도에 따른 불확실성은 강우-유출모델의 결과에 전파되어 모델의 모의결과에 오차를 발생시키는 원인이 된다. 또한 흐름경로의 결정은 수문모델링에서 DEM으로부터 수계를 형성하고 유역을 생성 및 분할하는데 있어 결정적인 역할을 하며, 각 셀의 경사는 흐름방향을 결정하고 흐름길이는 흐름경로를 따라 측정된 거리로서 결정된다. 이러한 모든 일련의 과정들은 셀간의 연산을 통해 이루어지며, 이러한 점에서 DEM의 해상도에 따른 DEM 처리연산 및 수문지형인자의 변동성은 중요한 고려사항이라 할 수 있다. DEM의 해상도에 따른 영향을 규명하기 위해서는 주요 수문지형인자를 대상으로 DEM의 해상도에 따른 민감도를 분석하는 것이 일반적이며, 따라서 본 연구에서는 위천, 황강 및 금호강 유역에 대해 DEM의 셀크기에 따른 유역면적, 유로연장과 최원유로연장, 유역평균경사와 같은 수문지형인자의 변동성을 분석하였다. 셀크기가 증가함에 따라 유로연장 및 최원유로연장이 감소하는 추세는 보이고 있지만 셀크기의 증가로 인해 반드시 흐름길이 및 유로연장이 감소 또는 증가되는 것은 아니며, 더 많은 유역에 대한 적용을 통해 유로연장에 대한 변동을 규명할 필요가 있을 것으로 판단된다. 또한 유역평균경사는 대체로 셀크기 $10\sim30m$에서 가장 큰 감소를 보이고 있으며, 셀크기 30m 이상에서는 감소크기가 점차 완만하게 나타난다. 그리고 셀크기가 증가할수록 유역평균경사에 대한 누가빈도곡선의 기울기는 점차 급해지고 누가빈도가 증가할수로 각 셀크기간의 유역평균경사의 감소에 큰 영향을 미침을 알 수 있다. 이는 비록 유역평균경사에 대한 누가빈도분포의 추세가 모든 해상도에 대해 유사하게 나타나고 있지만 급경사부에 대해서는 데이터 축약으로 인해 유역평균경사에 있어 상당한 감소를 발생시킬 수 있기 때문이라 판단된다.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1359-1362
• /
• 2009

Digital media technology has power of influence as extended in not only science and technology but also our society and culture. These phenomenon is explained as 'digital convergence'. Edmond Couchot argue the term 'hybridization'. Yvonne Spielmann and Jay David Bolter also argue that digital hybrid artworks across and integrates a diverse range of modes of representation, such as image, text, sound, space and bodily modes of expression. They must also address communicative interaction in the convergence of real and virtual spaces. In this paper, I noticed mixed reality environment which is seen as the form of hybrid between real and virtual object. And I discuss about this phenomenon as the study of interdisciplinary between art and science.

• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.618-628
• /
• 2014

A photograph used in a film poster summarizes the story of the film that lasts for around two hours. The image must contain a picture that represents the story and text including the title, with various design elements composed in a harmonious way. However, given that a photograph is the most noticeable element in a film poster, this study aims to examine the function, role, and types of a film poster and analyze poster photographs. Currently, there are companies specialized in photography for film posters, but sometimes recognized photographers are commissioned to take a photograph that will be used for a film poster. Hein-kuhn Oh actively produced such photographs in the early and mid-2000s, and this study deals with 'how the photographs recreate the content of the films' focused on three selected photographs taken by him. Also, There were commonalities found between the tree photographs and Oh's personal portrait photographs, which were then analyzed from the photographic aesthetic point of view. The three selected works are: , , and .