• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.37-48
• /
• 1984

For the designing propulsion shafting of ship, shaft diameters are usually calculated according to the Society's rules and other scantlings such as a shaft length, coupling and taper parts, etc., are decided according to calculated diameters. And then, the torsional vibration, the lateral vibration and shaft alignment should be reviewed to check whether the resonance points of torsional or lateral vibration appear within the normal operating speed range and the shaft alignment is reasonable. If the results of calculations are unsatisfactory, this process should be repeated until the final condition is determined and the process of this work takes much time to carry out. To simplify the above tedious processes, authors have developed a computer program to fulfill the above design processes at once. This program takes aim at reducing the manual calculating work associated with the propulsion shafting of ship. To confirm the availability of developed computer program, several propulsion shaftings which are driven by diesel engines, have been analysed. The results calculated by authors developed computer program show comparatively good agreements with those of the actual propulsion shafting.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.3
• /
• pp.11-38
• /
• 1986

Past and present developments in the alignment procedures of the line shafting are discussed. It is shown that the effects of the propeller hydrodynamics and of the oil-films, built up in the journal bearings, can essentially change the static alignment. However, the inclusion of these phenomena in the alignment is not yet standard. Also the dynamic effects of natural frequencies and vibratory excitations are not yet accounted for in the general case, although also these aspects can influence the safe operation of the line shafting. Therefore a plea is made to develop a more complete and thus a more rational alignment procedure.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.60-71
• /
• 2000

When the crankshaft of Diesel engine has more than 3 throws which are arranged in a different plane its vibration induces coupled motions especially the coupled torsional and axial vibration. Nowadays the torsional vibration which is influenced rather weak than axial one can be theoretically calculated fairly accurately but theoretical calculation results of the axial vibration which is influenced strongly from torsional vibration is not so good. To get accurate calculation results of axial vibration coupled axial-torsional vibration must be treated. in this investigation coupled effects of vibration of Diesel engine propulsion shafting are analyzed theoretically and some more simple calculation methods are also studied. On this first report effects of coupling on natural frequencies and their modes are mainly studied setting the each mass in 4 degrees of freedom. later this problem may be studied again by setting each mass as 6 degrees of freedom.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.184-184
• /
• 2012

Recently, as a result of the application of large and multi-blade propellers with high efficiency for large vessels, the vertical bending stiffness of propulsion shafting system tends to be declined. For some specific vessels, the shaft arrangement leads to the forward stern tube bearing to be omitted, decreasing vertical bending stiffness. In this respect, decreased vertical bending stiffness causes the problem which is the blade order resonance frequency to be placed within the operational range of propulsion shafting system. To verify whirling vibration, the measurement should be carried out covering the range of MCR, however, the range is un-measurable. To resolve the measurement issue, this study shows the measuring method and the estimating method of whiling vibration by using resonance frequency of sub harmonic.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.175-175
• /
• 2012

Proper shaft alignment is one of the most important actions during the design of the propulsion system. The stiffness of recently designed marine propulsion shafting has been increasing remarkably, whereas hull structures have become more likely to deform as a result of optimized design of the scantlings and the high tensile steel. Therefore, to obtain the optimum status in shafting alignment at the design stage, it is strongly recommended that the change of bearing reaction force depending on ballast/load condition, the bending moment force occurred by propeller thrust, elastic deformation of bearing occurred by vertical load of shaft mass and etc., should be considered. This paper dealing with introduction of shaft alignment concerning long shaft for high speed vessel and review its reliability evaluation theoretically.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.38-44
• /
• 1985

A computer program was developed for the analysis of the coupled transverse vibrations of a multi-supported shaft system. The program, based on the theory of Transfer Matrix Method, was written including the system parameters such as the entrained water and gyroscopic effects of the propeller, the rigidity of bearing combined with the oil film effect, and the whirling frequency of the shaft. The program was used to calculate the resonance frequency of the shafting system of the ship Hanbada. The results show good agreement with the measured values. The results are also compared with those of F.E.M. from the comparison, it is found that both results agree well with each other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.301-306
• /
• 2000

Small passenger and car carrier ships are mainly used as a connection way between land and small islands. And these ships should be designed to enlarge the capacity of passenger and car loading within limited space and draft. So the resonances of various vibrations exist in normal operation range of engine and propulsion shafting. In this paper, hull's superstructure vibration which was especially induced by the 1st order excitation of whirling vibration on the 2-engines and 2-propulsion shafting systems is introduced. Also these are verified via the theoretical analysis using transfer matrix method and FEA software ANSYS and its vibration measurement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1082-1087
• /
• 2021

The propeller shaft has different pattern of behaviors at each static, dynamic, and transient condition to a ship shaft system due to the effects of propeller weight and eccentric thrust, which increases the potential risk of bearing failure by causing local load variations. To prevent this, the various research of the shafting system has been conducted with the emphasis on optimizing the relative slope and oil film retention between propeller shaft and stern tube bearing at quasi-static condition, mainly with respect to the Rules for the Classification of Steel Ships. However, to guarantee a stability of the shafting system, it is necessary to consider the dynamic condition including the transient state due to the sudden change in the stern wakefield during rudder turn. In this context, this study cross-validated the ef ect of propeller shaft behavior on the stern tube bearing during port turn operation, which is a typical transient condition, by using the strain gauge method and displacement sensor for 50,000 DWT medium class tanker. And it was confirmed that the propeller eccentric thrust change showing relief the load of the stern tube bearing.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.64-75
• /
• 2009

The shipbuilder's requirement for a higher power output rating has led to the development of a super large two stroke low speed diesel engines. Usually a large-sized bore engine ranging from $8{\sim}14$ cylinders, this engine group is capable of delivering power output of more than 100,000 bhp at maximum continuous rating(mcr). Other positive aspects of this engine type include higher thermal efficiency, reliability, durability and mobility. This plays a vital role in meeting the propulsion requirement of vessels, specifically for large container ships, of which speed is a primary concern to become more competitive. Consequently, this also resulted in the modification of engine parameters and new component designs to meet the consequential higher mean effective pressure and higher maximum combustion pressure. Even though the fundamental excitation mechanisms unchanged, torsional vibration stresses in the propulsion shafting are subsequently perceived to be higher. As such, one important viewpoint in the initial engine design is the resulting vibration characteristic expected to prevail on the propulsion shafting system(PSS). This paper investigated the torsional vibration characteristics of these super large engines. For the two node torsional vibration with a nodal point on the crankshaft, a tuning damper is necessary to reduce the torsional stresses on the crankshaft. Hence, the tuning torsional vibration damper design and compatibility to the shafting system was similarly reviewed and analyzed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.9
• /
• pp.806-813
• /
• 2013

For the past years, higher power rating 2 stroke super long stroke diesel engines having more than 8 cylinders and larger cylinder bore are installed mainly on very large containerships to save on fuel consumption. However, these engines are prone to X-mode vibration due to 2nd node torsional vibration or the X-type moment, particularly because of the increase in total length and height. Recently, cases of excessive X-mode vibration often occurred on engine's major components. This vibration is manifested also as secondary vibration causing failure in engine-mount large structures. This study investigated the excitations caused by the 2nd node propulsion shafting torsional vibration that influence X-mode vibration of the main engine and practical countermeasures are proposed. An 8RT-flex82T 8 cylinder engine and 11S90ME-C 11 cylinder engine for a container ship was used as research model.