• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.387-395
• /
• 2018

In this study, the noise characteristics of the propeller tip vortex cavitation and its inception were analyzed experimentally. Generally, tip vortex cavitation is the first appeared cavity that occurs in a propeller. If propeller tip vortex cavitation is appeared, the level and characteristics of underwater radiated noise changes dramatically compared with the non-cavitating propeller. Therefore, it is very important to analyze the noise characteristics of the propeller cavitation and to detect the cavitation inception in the development of the propulsion system for military vessel and underwater weapon system. The change of noise characteristics due to the inception and growth of the propeller tip vortex cavitation was analyzed. Various imaging-noise measurement and analysis technique were used to determine the inception of propeller cavitation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.447-450
• /
• 2004

선박에서 발생하는 소음 가운데 수중 추진기 소음은 가장 우세한 소음이다. 추진기 소음은 소나에 의해 적을 탐지하는 군용 선박에 경우 생존과 직결된 문제가 되며 쾌적함과 정숙성을 요구하는 여객선의 경우에서도 중요한 문제로 대두되고 있다. 이러한 중요성과 필요성에 따라, 본 연구에서는 수중 추진기의 비공동 및 공동 소음을 수치적으로 해석하였다. 수중 추진기 소음 해석을 위해 유동 해석이 선행되어야 하며 이는 포텐셜을 기반으로 한 패널법을 이용하여 해석한다. 소음 해석은 시간 영역 음향상사법을 이용하였으며, 공동 소음은 홀극 음원으로 모사하여 해석하였다. 또한 향후 수중 추진기의 날개 끝 볼텍스 캐비테이션 해석을 위한 기초연구로서 Eulerian-Lagrangian 접근법을 이용하여 수중익에서의 날개 끝 볼텍스 캐비테이션의 거동과 소음을 예측하였다.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.62-67
• /
• 2008

The hovercraft is the amphibious hovercraft. Design and manufacturing companies of the aero propeller exist rarely in the world. Hence the propeller has beef designed and manufactured by manufacturing companies which make aero propeller mainly. In this paper, the hovercraft propeller of similar, which is building and designing by HHIC, is considered the type of aero propeller, rotational speed, diameter, number of blades, Open air propeller efficiency. As the result of check, hovercraft which is necessary huge static thrust is needed the ducted propeller in order to improve climbing capacity. However, the number of blades and turning direction almost do not affect.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.8-17
• /
• 2002

In this paper, the computational analysis of open-water characteristics for three model propellers(P4119, P4842 and 3 podded propeller of KRISO) is done by using a viscous-flow method based on Reynolds-Averaged Navier-Stokes equations. The results are presented for open-water performances, blade-section pressures, and circumferentially-averaged velocity profiles for the all three propeller models. Overall close agreements with available experimental data are shown. However, some discrepancies are also found in the pressure near the leading edge of the propeller blade and the open-water performance of the podded propellers.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.501-508
• /
• 2011

In order to control the tip vortex cavitation occurring around the tip of a rotating propeller blade, researches on the propeller cavitation and blade tip vortex flows have been increased. In this paper, the propeller tip vortex flow for a blunt and sharp tips was studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. In numerical open water test, torques, thrusts, pressure distributions and vortex flows were compared for various rotating speeds. To consider a hull wake, the nominal wake was specified in inlet boundary condition. Pressure distributions and vortex flows with the hull wake were investigated for various propeller rotating angles. From the results, it was confirmed that the blunt tip propeller delayed the tip vortex flow.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.268-277
• /
• 2022

In this study, each component of flow noise source of underwater propeller installed to the scale model of the KVLCC2 is investigated and the effect of each noise source on underwater-radiated noise is quantitatively analyzed. The computation domain is set to be the same as the test section of the large cavitation tunnel in the Korea Research Institute of Ship and Ocean Engineering. First, for the high-resolution computation of flow field which is noise source region, the incompressible multiphase Delayed Detached Eddy Simulation is performed. Based on flow simulation results, the Ffowcs Williams and Hawkings integral equation is used to predict underwater-radiated noise and its validity is confirmed through the comparison with the tunnel experiment result. For the quantitative comparison on the contribution of each noise source, the spectral levels of sound pressure and power levels predicted using propeller tip-vortex cavitation, blade surface and rudder surface as the integral region of noise sources are investigated. It is confirmed that the cavitation which is monopole noise source significantly contributed to the underwater-radiated noise than propeller blades and rudder which is dipole noise source, and the rudder have more contribution than propeller blades due to the influence of the propeller wake.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.41-49
• /
• 1999

A feasibility study is performed for practical application of a Ventilating Water-Jet(VWJ) propulsor which attracts new attention as a candidate propulsor for super-high speed vessels. Super-cavitating foil sections are adopted for the rotor blades since the rotor is operating at ventilating condition. Wedge type and cavitator type foil sections are used for the design of rotor blades. Other geometric characteristics of rotors are selected from the Kaplan type ducted propeller rotors. The test section of KRISO cavitation tunnel is modified to perform open-water tests of the VWJ propulsors. The tests are performed both at fully-submerged and free-jet conditions. Ventilation occurred at the free-jet condition by sucking the air in the downstream side of the rotor, which easily develops as super-cavitation when the rotor operates at lower advance coefficients. Spoilers are attached at the trailing end of the pressure side of the blade section, in order to increase the lift force.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.261-269
• /
• 2021

Without any validation of the incompressible assumption, most of previous studies on cavitation flow and its noise have utilized numerical methods based on the incompressible Reynolds Average Navier-Stokes (RANS) equations because of advantage of its efficiency. In this study, to investigate the effects of the flow compressibility on the Tip Vortex Cavitation (TVC) flow and noise, both the incompressible and compressible simulations are performed to simulate the TVC flow, and the Ffowcs Williams and Hawkings (FW-H) integral equation is utilized to predict the TVC noise. The DARPA Suboff submarine body with an underwater propeller of a skew angle of 17 degree is targeted to account for the effects of upstream disturbance. The computation domain is set to be same as the test-section of the large cavitation tunnel in Korea Research Institute of Ships and Ocean Engineering to compare the prediction results with the measured ones. To predict the TVC accurately, the Delayed Detached Eddy Simulation (DDES) technique is used in combination with the adaptive grid techniques. The acoustic spectrum obtained using the compressible flow solver shows closer agreement with the measured one.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.38-45
• /
• 2021

In this study, changes in cavitation pattern and noise by air injection were investigated experimentally in a cavitation tunnel. Air injection system that can control the location and the amount of air was manufactured and installed in an elliptic wing that exhibits similar characteristics to those of a propeller blade. Various types of cavitation were simulated on the hydrofoil by adjusting the test conditions in the cavitation tunnel, and the changes in cavitation pattern and noise according to air injection were experimentally analyzed. It was shown that the noise characteristics varied depending on the position and the amount of air injection. This means that in order to apply the air injection technology to the propeller, it is necessary to optimize the air injection location and the amount of injection according to the cavitation characteristics.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.209-214
• /
• 2001

RANS 방정식의 수치해법을 사용해서 tractor와 pusher 방식의 포드 프로펠러 주위 점성유동을 계산함으로써 포드형 전동 추진기의 추진 특성을 파악하고자 하였다. 본 연구에 사용한 수치해석 방법을 검증하기 위하여 최근 국내에서 모형 실험이 수행된 포드 프로펠러 형상에 대해 수치계산을 수행하고, 계산으로부터 얻어진 tractor와 pusher 방식의 포드 프로펠러에 대한 단독 성능을 실험 결과와 비교하였다. 또한, 포드에 작용하는 압력 및 프로펠러 날개 주위의 유동을 분석함으로써, 포드가 프로펠러의 추진 성능에 미치는 영향과 tractor와 pusher 추진 방식의 특성을 살펴보았다.