• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.51-60
• /
• 2001

The travel behavior can be analysed microscopically using GPS because the travel characteristics can be found out by travelling two test cars loaded with GPS equipments. The speed difference and spacing variation between the lead vehicle and the following's in uninterrupted flow are the important variables related to capacity and safety. This study analysed these with data obtained by travelling the 4th Line and 28th Line of the national road. The variation width in speed difference in the run time is below 3.0%. But, related to the speed difference in the situation of acceleration and deceleration the difference after 4second is bigger than that just after the start. The spacing variation is similar to this. The spacing just before deceleration concerning safety was analysed. When the theoretical values by the modeling method and observed values were compared, the observed values were analysed 12.52% shorter than the other in average.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.107-112
• /
• 2001

본 연구는 FTMS와 TCS를 실시간으로 통신하여 톨게이트 운영에 관련된 다양한 교통정보를 제공하는 교통상황 모니터링과 미래의 교통상황을 예측하고 이를 바탕으로 톨게이트 교통상황을 예측하는 톨게이트 시뮬레이션 시스템(TGSS)을 개발하는 것이다. 교통상황 모니터링은 실시간 교통자료를 통계처리하고 분석하여 사용자에게 그래픽하게 교통정보를 제공하고 교통류의 예측은 톨게이트에 도착하는 교통류를 60분 후까지 예측하여 톨게이트 운영자에게 제공한다. 또한 톨게이트 예측시스템은 서울톨게이트에 도착하는 교통류 패턴을 이용하여 미래 톨게이트 교통상황을 시뮬레이션하고 이에 대한 톨게이트 운영 대안을 제시하는 기능을 수행한다. FTMS 및 TCS와 실시간으로 통신하기 위하여 별도의 통신프로그램을 작성하였고 통신에 의해 수집된 실시간 교통자료들은 모니터링 시스템과 연계하여 서울 톨게이트 주변구간의 교통상황과 톨게이트 운영 현황을 제공한다. 교통류 예측 시스템에 사용되는 모형은 거시적 교통류 모형인 Simple Continuum 모형과 시계열 모형을 이용하였고 이를 통해 서울 톨게이트에 도착하는 미래 교통류를 예측 할 수 있다. 톨게이트의 교통상황을 구현하기 위하여 미시적 모형인 차량추종모형과 차로변경모형을 톨게이트 예측 시스템에 반영하였고 현재의 톨부스 운영안과 사용자가 입력하는 톨부스 운영대안에 따라 시뮬레이션 함으로써 미래 톨 플라자내 교통상황을 톨게이트 운영자에게 애니메이션으로 보여줄 수 있다. 톨게이트 시뮬레이션 시스템을 이용하여 현재의 톨게이트 운영안과 최적화된 운영안을 상호 비교함으로써 톨게이트 운영자는 좀더 과학적인 톨게이트 운영을 모색할 수 있을 것으로 생각된다. 실용적 측면에서 볼 때, 톨게이트 시뮬레이션 시스템(TGSS)은 실시간 통신을 통한 모니터링과 교통류 예측으로 톨게이트 상황을 시뮬레이션하고 톨게이트 운영 대안을 제시·평가함으로써 서울톨게이트 운영을 효율화하고 이로 인한 고속도로 소통 증대를 도모할 수 있을 것으로 기대된다.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.91-102
• /
• 2003

There are two goals in this paper. The one is development of existing CA(Cellular Automata) model to explain more realistic deceleration process to stop. The other is the application of the updated CA model to forecasting simulation to predict short term link travel time that takes a key rule in finding the shortest path of route guidance system of ITS. Car following theory of CA models don't makes not response to leading vehicle's velocity but gap or distance between leading vehicles and following vehicles. So a following vehicle running at free flow speed must meet steeply sudden deceleration to avoid back collision within unrealistic braking distance. To tackle above unrealistic deceleration rule, “Slow-to-stop” rule is integrated into NaSch model. For application to interrupted traffic flow, this paper applies “Slow-to-stop” rule to both normal traffic light and random traffic light. And vehicle packet method is used to simulate a large-scale network on the desktop. Generally, time series data analysis methods such as neural network, ARIMA, and Kalman filtering are used for short term link travel time prediction that is crucial to find an optimal dynamic shortest path. But those methods have time-lag problems and are hard to capture traffic flow mechanism such as spill over and spill back etc. To address above problems. the CA model built in this study is used for forecasting simulation to predict short term link travel time in Kangnam district network And it's turned out that short term prediction simulation method generates novel results, taking a crack of time lag problems and considering interrupted traffic flow mechanism.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.109-120
• /
• 2007

This study developed a methodology that can reflect more realistic traffic flow to understand platoons on highways. The understanding of the phenomenon nay secure highway safety and authoritative credibility in highway planning. In this study platoons generated by 'random effects' of cars are modeled, and this model is validated using a real data set acquired from the Jayu Expressway in Kyonggi Province, Korea.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.113-130
• /
• 2002

In this paper, we developed DNL(Dynamic Network Loading) model based on Moving cell theory to analyze the dynamic characteristics of traffic flow in congested network. In this paper vehicles entered into link at same interval would construct one cell, and the cells moved according to Cell following rule. In the past researches relating to DNL model a continuous single link is separated into two sections such as running section and queuing section to describe physical queue so that various dynamic states generated in real link are only simplified by running and queuing state. However, the approach has some difficulties in simulating various dynamic flow characteristics. To overcome these problems, we present Moving cell theory which is developed by combining Car following theory and Lagrangian method mainly using for the analysis of air pollutants dispersion. In Moving cell theory platoons are represented by cells and each cell is processed by Cell following theory. This type of simulation model is firstly presented by Cremer et al(1999). However they did not develop merging and diverging model because their model was applied to basic freeway section. Moreover they set the number of vehicles which can be included in one cell in one interval so this formulation cant apply to signalized intersection in urban network. To solve these difficulties we develop new approach using Moving cell theory and simulate traffic flow dynamics continuously by movement and state transition of the cells. The developed model are played on simple network including merging and diverging section and it shows improved abilities to describe flow dynamics comparing past DNL models.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.54-59
• /
• 2000

This paper presents a control system that uses a fuzzy algorithm in controlling the depth of a model midwater trawl net, and experimental results carried out in the circulating water channel by using a model trawl winch system.The fuzzy controller calculates the length of the warp to be changed, based on the depth error between the desired depth and actual depth of the model trawl net and the ratio of change in the depth error. The error and the error change are calculated every sampling time. Then the control input, i.e. desirable length of the warp, is determined by inference from the linguistic control rules which an experienced captain or navigator uses in controlling the depth of the trawl winch controller and the length of the warp is changed. Two kinds of fuzzy control rules were tested, one was obtained from the actual operations used by a skilled skipper or navigator, and the other was a modified from the former by considering the hydrodynamic characteristics of the model trawl system.Two kinds of fuzzy control were tested, one was obtained fro the actual operations used by a skilled skipper or navigator, and the other was a modified from the former by considering the hydrodynamic characteristics of the model trawl system.The results of these model experiments indicate that the proposed fuzzy controllers rapidly follow the desired depth without steady-state error although the desired depth was given in one step, and show robustness properties against changes in the parameters such as the change of the towing sped. Especially, a modified rule shows smaller depth fluctuations and faster setting times than those obtained by a field oriented rule.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.147-174
• /
• 2010

This paper aims to analysis sectoral innovation patterns of technological innovation and localized knowledge spillover in Korean manufacturing sector. Sectoral innovation system approach proposed that the specific pattern of innovative activity and knowledge spillover in an industry can be explained as the outcome of different technological regimes. Technological regime is defined by the particular combination of technological opportunities, appropriability of innovations, cumulativeness of technical advances and properties of the knowledge base. Based on a sample of 2,882 firms in manufacturing sector, this paper provides empirical estimates of the relationships between firm's product innovation and localized knowledge spillover. Results of the analysis provide considerable support to the hypothesis that firm's product innovation and localized knowledge spillover are related to the nature of the underlying technological regime. In the industry based on the tacit and specific knowledge, firm's product innovation is positively related to the localized knowledge spillover. This paper also shows that high stability in the ranking of innovators are related to high degrees of cumulativeness and appropriability.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.34-41
• /
• 1987

This work concerns with a comparison of the 1-dimensional (or 1-D) load follow analysis method with reference to the detailed 3-dimensional (or 3-D) computations. For this purpose a 1-D two-group finite difference code, HLOFO, and a 3-D coarse-mesh code based on the modified Borresen's method, CMSNAC, are developed. The CMSNAC code is used to obtain the 3-D power peaks and reactivity parameters in response to power swing from 100 to 50 and back to 100% in the 12-3-6-3 load cycle for the BOL of the KORI Unit 1 PWR core. The 3-D result is then compared with the 1-D HLOFO computations, the cross section and buckling inputs of which are obtained by combining the flux-volume weighting scheme with the approximate flux from the auxiliary 3-D computations. It is shown that the 1-D computation has a limited accuracy, yet it is confirmed that it can describe the core axial average behavior which is fairly consistent with the detailed 3-D computation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.363-371
• /
• 2009

The purpose of this study is to verify the safety issue of the tinted vehicle based on the field study as well as the issue of the capacity reduction from the tinted vehicle. Through this study, an innovative experimental method to verify the issues was developed using RTK GPS receivers, and a data collection was conducted using the developed experimental method. Using the collected data, the effects of the ahead vehicle with the windows tinted on the traffic condition such as headways and acceleration noise were analyzed to test that the ahead vehicle with windows tinted too darkly affects the increasing vehicle maneuver as following the degree of tinting. This study was conducted as a frontier study and more studies, for example, full scale analyses considering various road and vehicle conditions need to be conducted in the future.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.79-89
• /
• 2015

This study aims to design and implement a traffic model that can simulate the traffic behavior on the microscopic level by using the GIS. In the design of the model, the vehicle in the simulation environment recognizes the GIS road centerline data as road network data reflecting number of lanes, speed limit and so on. In addition, the behavior model was designed by dividing functions into the environmental perception model, time headway distribution model, car following model, and lane changing model. The implemented model was applied to Jahamun-road of Jongno-gu district to verify the accuracy of the model. As a result, the simulation results on the Jahamun-road had no great error compared with the actual observation data. In the aspect of usability of model, it is judged that this model will be able to effectively contribute to analysis of amount of carbon emission by traffic, evaluation of traffic flow, plans for location of urban infrastructure and so on.