• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1331-1343
• /
• 2000

Through the integration of USLE and GIS, the methodology to estimate the soil loss was developed, and applicated to the Sacheon river in Gangrung. Using GIS, spatial analysis such as watershed boundary determination, flow routing. slope steepness calculation was done. Spatial information from the GIS application was given for each grid. With soil and land use map, information about soil classification and land use was given for each grid too. Based upon these data, thematic maps about the factors of USLE were made. We estimated the soil loss by overlaying the thematic maps. In this manner, we can assess the degree of soil loss for each grid using GIS. Annual average soil loss of Sacheon river watershed is 1.36 ton/ha/yr. Soil loss in forest, dry field, and paddy field is 0.15 ton/ha/yr, 27.04 ton/ha/yr, 0.78 ton/ha/yr respectively. The area of dry field, which is 4% of total area, is $2.4km^2$. But total soil loss of dry field is 6561 ton/yr, and it occupies 84.9 % of total soil loss eroded in Sacheon river watershed. Comparing with the 11.2 ton/ha/yr of an average soil loss tolerance for cropland, provision for the soil loss in dry field is necessary. Run-off and water quality of Sacheon river were measured two times in flood season: from July 24, 1998 to July 28 and from September 29 to October 1. As the run-off of the river increased, SS, TN, TP concentrations and pollutant loadings increased. SS, TN, TP loads of Sacheon river discharged during the 2 heavy rains were 21%, 39%, and 19% of the total pollutant loadings generated in the Sacheon river watershed for one year. We can see that much pollutants are discharged in short period of flood season.

• Progress in Medical Physics
• /
• v.20 no.1
• /
• pp.37-42
• /
• 2009

Proton therapy facility, which is recently installed at National Cancer Center in Korea, generally produces a large amount of radiation near cyclotron due to the secondary particles and radioisotopes caused by collision between proton and nearby materials during the acceleration. Although the level of radiation by radioisotope decreases in length of time, radiation exposure problem still exists since workers are easily exposed by a low level of radiation for a long time due to their job assignment for maintenance or repair of the proton facility. In this paper, the working environment near cyclotron, where the highest radiation exposure is expected, was studied by measuring the degree of radiation and its duration for an appropriate level of protective action guide. To do this, we measured the radiation change in the graphite based energy degrader, the efficiency of transmitted beam and relative activation degree of the transmission beam line. The results showed that while the level of radiation exposure around cyclotron and beam line during the operation is much higher than the other radiation therapy facilities, the radiation exposure rate per year is under the limit recommended by the law showing 1~3 mSv/year.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.11-22
• /
• 2017

A plaza represents the identity of a city, and that reveals a plaza's importance. Gwanghwamun Plaza and Seoul Plaza are two representative plazas where the citizens can freely express their opinions. Many major plazas in the center of Seoul were built under the Japanese occupation. Among these, the plaza of Joseon Bank has different characteristics than Gwanghwamun Plaza and Seoul Plaza. Even though this plaza was built in the center of the commercial, administrational, and cultural district during the Japanese colonial period, the research on this plaza has been limited. This study was conducted to verify the features of this plaza by analyzing its construction and transformation during the Japanese colonial period. The study's results outline how the plaza was constructed by the Japanese administration. The intention of the government is shown by the fact that it purchased land parcels and held a design competition. In the 1910s, the government purchased seven parcels of land during the expansion of roads as the place for the plaza. During the late 1930s, the government accepted a traffic circle to regulate the traffic and eliminate the conflict between crossing movements. In 1939, a fountain was built in the plaza's center, and its design was selected through a design competition. It was planned as a square, but gradually turned into a rotary. Furthermore, the plaza was a landmark and symbol of the power and modernity of Japan. As the main modal point of public transportation, the plaza became surrounded with largescale Western-style buildings, commercial advertising, and neon signs. The plaza became a place where people could experience the modern city. These spectacular displays showed that Japanese imperialism was perceived as a strange and peculiar landscape to the majority of Korean citizens. This study investigates the history and characteristics of the plaza, focusing on its beginning as well as the transformation of its form. As to the limitations of the study, it does not consider political and economic contexts within the transformation of Seoul and in relation to this plaza. Instead, that research remains for a future study.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.105-115
• /
• 2007

Data mining extracts interesting knowledge from a large database. Among numerous data mining techniques, research work is primarily concentrated on clustering and association rules. The clustering technique of the active research topics mainly deals with analyzing spatial and attribute data. And, the technique of association rules deals with identifying frequent patterns. There was an advanced apriori algorithm using an existing bit-clustering algorithm. In an effort to identify an alternative algorithm to improve apriori, we investigated FP-Growth and discussed the possibility of adopting bit-clustering as the alternative method to solve the problems with FP-Growth. FP-Growth using bit-clustering demonstrated better performance than the existing method. We used chess data in our experiments. Chess data were used in the pattern mining evaluation. We made a creation of FP-Tree with different minimum support values. In the case of high minimum support values, similar results that the existing techniques demonstrated were obtained. In other cases, however, the performance of the technique proposed in this paper showed better results in comparison with the existing technique. As a result, the technique proposed in this paper was considered to lead to higher performance. In addition, the method to apply bit-clustering to GML data was proposed.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.164-173
• /
• 2004

To delineate geothermal water movement at the Pohang geothermal development site, Self-Potential (SP) survey and monitoring were carried out during pumping tests. Before drilling, background SP data have been gathered to figure out overall potential distribution of the site. The pumping test was performed in two separate periods: 24 hours in December 2003 and 72 hours in March 2004. SP monitoring started several days before the pumping tests with a 128-channel automatic recording system. The background SP survey showed a clear positive anomaly at the northern part of the boreholes, which may be interpreted as an up-flow Bone of the deep geothermal water due to electrokinetic potential generated by hydrothermal circulation. The first and second SP monitoring during the pumping tests performed to figure out the fluid flow in the geothermal reservoir but it was not easy to see clear variations of SP due to pumping and pumping stop. Since the area is covered by some 360 m-thick tertiary sediments with very low electrical resistivity (less than 10 ohm-m), the electrokinetic potential due to deep groundwater flow resulted in being seriously attenuated on the surface. However, when we compared the variation of SP with that of groundwater level and temperature of pumping water, we could identify some areas responsible to the pumping. Dominant SP changes are observed in the south-west part of the boreholes during both the preliminary and long-term pumping periods, where 3-D magnetotelluric survey showed low-resistivity anomaly at the depth of $600m\~1,000m$. Overall analysis suggests that there exist hydraulic connection through the southwestern part to the pumping well.

• The Korean Journal of Nuclear Medicine
• /
• v.36 no.2
• /
• pp.121-132
• /
• 2002

Purpose : Taxol(Paclitaxel), an antineoplastic agent, has been used in the treatment of ovarian and breast cancers. The determination of optimal Taxol concentrations in human serum was required for enhancing therapeutic effect and maintaining the appropriate Taxol level in blood. This study was aimed to synthesizeradiolabeled Taxol derivatives as radiotracer in competitive radioimmunoassay for monitoring Taxol concentrations in blood and to determine the usefulness of its derivatives. Materials and Methods : Hemisucdcinyltaxol(HT) was synthesized by esterification of Taxol with succinic anhydride. Tyraminehemisuccinyltaxol(THT) was synthesized by coupling of HT with tyramine using isobutylchlormate as coupling agent and purified by HPLC. By using chloramine-T($5.25mg/ml,\;10{\mu}{\ell}$) as oxidant agent, THT($4mg/ml,\;30{\mu}{\ell}$) was labeled wity $^{125}I\;(37MBq,\;1mCi)$. To estimate the stability of purified THT, $^{125}I-iodotyraminehemisuccinyltaxol(^125}ITHT)$ was dissolved in 80% acetonitrile aqueous solution, and the solution was incubated at $4^{\circ}C\;and\;37^{\circ}C$ for 7 days. At various time intervals, the stability of THT and $^{125}ITHT$ was monitored. The titer of Taxol monoclonal antibody, 3G5A7, was determined by competitive radioimmunoassay using $^{125}ITHT$ as a labeled antigen. A standard dose-response curve was demonstated by Taxol competitive radioimmunoassay. Resulls : HT and THT were synthesized with 79.9% and 19.5% yield, respectively. The labeling yield of $^{125}ITHT$ was 93%. After 7 days, the chemical purity of THT was 96.5% at $4^{\circ}C$, and 97.5% at $37^{\circ}C$. After 3 days, $^{125}ITHT$ was stable with 94.7% at $4^{\circ}C$ and 93.4% at $37^{\circ}C$. After 7 days, fadiochemical purity was diminished to 88.1% at $37^{\circ}C$. The titer of Taxol monoclonal antibody, 3G5A7, was determined to 1:256. A standard dose-response curve demonstated good collinearity ($R^2=0.971$) as Taxol concentration-dependent manner. Conclusion : Competitive radioimmunoassay using $^{125}I-iodotyraminehemisuccinytaxol$ as radiotracer could be used to monitor for concentration of Taxol in the human serum.

• The Journal of Engineering Geology
• /
• v.21 no.2
• /
• pp.163-178
• /
• 2011

A test borehole was drilled in the Cheongwon area to investigate the relationship between geochemical environment and the natural occurrence of radioactive materials (uranium and Rn-222) in borehole groundwater. The borehole encountered mainly biotite schist and biotite granite, with minor porphyritic granite and basic dykes. Six groundwater samples were collected at different depths in the borehole using the double-packed system. The groundwater pH ranges from 5.66 to 8.34, and the chemical type of the groundwater is Ca-$HCO_3$. The contents of uranium and Rn-222 in the groundwater are 0.03-683 ppb and 1,290-7,600 pCi/L, respectively. The contents of uranium and thorium in the rocks within the borehole are 0.51-23.4 ppm and 0.89-62.6 ppm, respectively. Microscope observations of the rock core and analyses by electron probe microanalyzer (EPMA) show that most of the radioactive elements occur in the biotite schist, within accessory minerals such as monazite and limenite in biotite, and in feldspar and quartz. The high uranium content of groundwater at depths of -50 to -70 m is due to groundwater chemistry (weakly alkaline pH, an oxidizing environment, and high concentrations of bicarbonate). The origin of Rn-222 could be determined by analyzing noble gas isotopes (e.g., $^3He/^4He$ and $^4He/^{20}Ne$).

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.5
• /
• pp.394-400
• /
• 2008

Purpose: Quantitative comparison of transgene expression within stem cells between lentivirus and adenovirus-mediated delivery systems has not been reported. Here, we evaluated the human sodium iodide symporter (hNIS) gene expression in rat mesenchymal stem cell (rMSC) transduced by lentivirus or adenovirus, and compared the hNIS expression quantitatively between the two delivery systems. Materials and Methods: Lentiviral-mediated hNIS expressing rMSC (lenti-hNIS-rMSC) was constructed by cloning hNIS gene into pLenti6/UbC/V5-DEST (Invitrogen) to obtain pLenti-hNIS, transducing rMSC with the pLenti-hNIS, and selecting with blasticidin for 3 weeks. Recombinant adenovirus expressing hNIS gene (Rad-hNIS) was produced by homologous recombination and transduction efficiency of Rad-hNIS into rMSC evaluated by Rad-GFP was $19.1{\pm}4.7%$, $54.0{\pm}6.4%$, $85.7{\pm}8.7%$, and $98.4{\pm}1.3%$ at MOI 1, 5, 20, and 100, respectively. The hNIS expressions in lenti-hNIS-rMSC or adeno-hNIS-rMSC were assessed by immunocytochemistry, western blot, and 1-125 uptake. Results: Immunocytochemistry and western blot analyses revealed that hNIS expressions in lenti-hNIS-rMSC were greater than those in adeno-hNIS-rMSC at MOI 20 but lower than at MOI 50. However in vitro 1-125 uptake test demonstrated that iodide uptake in lenti-hNIS-rMSC ($29,704{\pm}6,659\; picomole/10^6\;cells$) was greater than that in adeno-hNIS-rMSC at MOI 100 ($6,168{\pm}2,134\;picomole/10^6\;cells$). Conclusion: Despite lower amount of expressed protein, hNIS function in rMSC was greater by lentivirus than by adenovirus mediated expression. Stem cell tracking using hNIS as a reporter gene should be conducted in consideration of relative vector efficiency for transgene expression.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.