• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.06b
• /
• pp.60-69
• /
• 1989

안정성과 진동억제 특성이 요구되는 터어빈이나 모터등의 고속 회전기계에서는 틸팅-패드 저어널 베어링이 많이 사용되고 있다. 이는 틸팅-패드 저어널 베어링에서는 패드가 피봇이나 로울러로 지지되어 있으므로 윤활유막에서 발생하는 압력의 합력중심이 항상 이 지지점을 지나게 되어 베어링의 안정특성이 향상되기 때문이다. 틸팅-패드 저어널 베어링은 추력 베어링과 같이 불연속적인 윤활면을 갖는다. 그러므로 베어링의 입구부 선단에서 공급되는 윤활유의 충돌로 인한 압력격변이 일어나는데 이때 패드 입구부에서 발생하는 압력을 선단압력이라 한다. 이러한 선단압력으로 인한 베어링의 성능변화에 관한 연구는 주로 추력 베어링에 대하여 이론 및 실험적으로 수행 되어져 왔으며 그 결과들은 선단압력이 베어링의 성능에 미치는 영향을 무시할 수 없음을 보여주고 있다. 그러나 아직도 선단압력의 영향이 제대로 파악되고 있지 못하며, 특히 틸팅-패드 저어널 베어링에서 선단압력의 영향을 조사한 연구는 많이 부족한 실정이다. 그러므로 본 연구에서는 유한폭 틸팅-패드 저어널 베어링을 모델화한 실험장치를 설계 제작하여 선단압력을 포함한 유막내의 압력분포 및 유막두께를 연속적으로 측정함으로써 틸팅-패드 저어널 베어링의 성능에 미치는 선단압력의 영향을 실험적으로 조사하기로 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.85-92
• /
• 2005

The motion of flexseal bearing for movable nozzle has inherent nonlinear characteristics due to floating rotational center and compression by combustion pressure of solid motor. To perform precise attitude control in spite of these characteristics, the TVC actuation system requires counter potentiometer as an extra position feedback sensor of movable nozzle to form a compensated control loop. The prototype TVC actuation system, test equipments and compensated controller are newly designed, manufactured and tested in consideration of counter potentiometer. On the basis of integration test, the inherent characteristics of movable nozzle and control characteristics of its TVC actuation system are analyzed and summarized in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.482-488
• /
• 2018

Generally, after stern tube bearing shows a significant increase in local load due to propeller load, which increases the potential adverse effects of bearing failure. To prevent this, research on regarding shaft alignment has been carried out with a focus on reducing the relative slope between the shaft and support bearing(s) under quasi-static conditions. However, for a more detailed evaluation of a shafting system, it is necessary to consider dynamic conditions. In this context, the results revealed that eccentric propeller force under transient conditions such as a rapid rudder turn at NCR, lead to fluid-induced instability and imbalanced vibration in the stern tube. In addition, compared with NCR condition, it has been confirmed that eccentric propeller forces given a rapid rudder starboard turn can lift a shaft from the stern tube bearing in the stern tube, contributes to load relief for the stern tube bearing.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1063-1070
• /
• 1988

The influence of the inlet pressure on bearing performance of tilting pad bearings in laminar regime is examined. A simple flow model is presented to calculate the inlet pressure in inlet flow that occurs at a short distance ahead of the bearing inlet. The bearing performances are obtained, load capacity, friction torque and lubricated flow-rate, etc, numerically for the inlet pressure boundary conditions with and without pressure jump. The computed results of both cases show that bearing performance and the optimum pivot position changes remarkably according to the bearing operating conditions. The influence of the inlet pressure on bearing performance must be considered to analyze the bearing performance precisely.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.539-542
• /
• 2002

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.11a
• /
• pp.57-66
• /
• 1988

틸팅-패드 저어널 베어링은 베어링틈새가 원주방향으로 불연속적이므로 패드선단의 약간 전방에서 압력이 상승하기 시작하여 패드선단에서는 주변압력보다 높은 압력을 나타낸다. 이를 선단압력(lnlet pressure or Ram-pressure)이라한다. 추력식 베어링에 대해 선단압력을 고려한 연구결과에 의하면 선단압력은 베어링의 틈새에서 발생하는 유막압력에 상당한 영향을 미치는 것으로 알려져 잇다. 틸팅-패드 저어널 베어링에 대해 정특성 해석을 한바 있으나 선단압력을 고려한 틸팅-패드 베어링의 동특성을 해석한 연구는 아직 없다. 실제로 틸팅-패드 저어널 제어링에서도 선단압력이 0이 아님이 알려져 있으므로 정특성 및 동특성을 보다 정확히 예측하기 위해서는 각 패드 입구부에서 발생하는 선단압력을 고려해야 할 것으로 생각된다. 따라서 본 연구에서는 무한폭 틸팅-패드 저어널 베어링에 대하여 선단압력을 고려하여 정특성 및 동특성을 해석하고 선단압력이 베어링의 정특성 및 동특성에 미치는 영향을 알아보고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.888-891
• /
• 2002

This paper presents the lubrication characteristics of a disk type wavy thrust bearing. The hydrodynamic pressure distributions in the fluid film are numerically solved the Reynolds equation and then the bearing load capacity and friction forces acting on the disk are calculated. Especially the effects of number and amplitude of the circumferential waves are investigated for tilted operating conditions. The results showed that the load capacity increases with wave amplitude and optimum wave number exists for given design conditions. Therefore the results can be applied to enhance the lubrication performance of thrust bearing adopted in the scroll compressor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1082-1087
• /
• 2021

The propeller shaft has different pattern of behaviors at each static, dynamic, and transient condition to a ship shaft system due to the effects of propeller weight and eccentric thrust, which increases the potential risk of bearing failure by causing local load variations. To prevent this, the various research of the shafting system has been conducted with the emphasis on optimizing the relative slope and oil film retention between propeller shaft and stern tube bearing at quasi-static condition, mainly with respect to the Rules for the Classification of Steel Ships. However, to guarantee a stability of the shafting system, it is necessary to consider the dynamic condition including the transient state due to the sudden change in the stern wakefield during rudder turn. In this context, this study cross-validated the ef ect of propeller shaft behavior on the stern tube bearing during port turn operation, which is a typical transient condition, by using the strain gauge method and displacement sensor for 50,000 DWT medium class tanker. And it was confirmed that the propeller eccentric thrust change showing relief the load of the stern tube bearing.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.77-79
• /
• 2006

본 논문에서는 Brushless DC Motors(이하 BLDC Motor이라 함)의 비대칭 영구자석 오버행 구조에 의한 Z축 방향 추력, 진동 특성을 연구하였다 무부하인 경우에는 Z축방향 추력이 일정하므로 베어링에 하중으로만 작용하여 진동은 발생하지 않는다. 그러나 코일전류가 증가할수록 코일전류에 의한 증자, 감자작용으로 인하여 자속에 리플이 발생하며 Z축 방향 추력도 리플은 물론 진동이 발생한다. 따라서, 븐 연구에서는 전기자 전류 변화에 따른 자속밀도 및 Z축 방향 추력 특성을 해석하였으며 이를 실험치와 비교하였다.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.8-13
• /
• 2010

An effective control of the axial thrust of a turbopump is one of the critical issues for obtaining its operational stability. Axial thrusts of the fuel pump for the 75-ton class rocket engine under development were measured with water as a test propellant at a room temperature. According to the test results, the axial thrust of the fuel pump seemed to satisfy the axial force condition of its bearing. Also, the thrust was increased as a whole when the flowrate of the pump was decreased. Furthermore it was found that the thrust and the leakage flowate were modified when the gaps between the floating ring seals and the impeller were changed.