• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2008

Solid Rocket Motor(SRM) has advantages such as - high specific impulse, operational safety and simplicity in design and manufacturing process but thrust magnitude can't be controlled. For studying of pintle nozzle that can control the thrust magnitude of SRM, cold flow test and numerical analysis about needle type pintle shape were performed and results were presented in this paper. As the results of this study, pintle tip's shape and nozzle contour were important design parameters because thrust performance and variable thrust range of pintle nozzle depend on them. Especially, the thrust of needle typed pintle nozzle adopted in this test was predicted 13% higher than normal nozzle without pintle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.289-294
• /
• 2007

Solid Rocket Motor(SRM) has advantages such as - high specific impulse, operational safety and simplicity in design and manufacturing process, but thrust magnitude can't be controlled. For studying of pintle nozzle that can control the thrust magnitude of SRM, cold flow test and numerical analysis about needle type pintle shape were performed and results were presented in this paper. As the results of this study, pintle tip's shape and nozzle contour were important design parameters because thrust performance and variable thrust range of pintle nozzle depend on them. Especially, the thrust of needle typed pintle nozzle adopted in this test was predicted 13% higher than normal nozzle without pintle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.24-25
• /
• 2000

실제 추진기관에서 비추력 성능에 미치는 열/유동현상은 이상 유동(ideal flow)과는 달리, 추진기관의 특성에 따라 다양한 열/유동손실이 나타나며, 연소시험 시에는 이러한 성능 손실 인자들이 복합적으로 작용하여 나타나는 추력이 측정된다. 따라서 임의의 추진기관을 새롭게 성능 설계할 때에 부딪히는 문제중의 하나는 추력 손실 양을 정량화 시키는 일이다. 그런데 고체 추진기관은 복잡한 물리적인 현상들이 복합되어 작동되기 때문에 lump parameter로 간단히 추력 손실을 예측하는 것은 매우 어려운 일이다.(중략)

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.195-207
• /
• 2012

This paper deals with attitude controller design and integrated performance tests on the nitrogen gas reaction control system of KSLV-I. Some major factors which are necessarily required in designing a stabilizing controller of reaction control system are investigated, and the corresponding equations are given. Experimental configurations and test conditions for system level integrated performance tests of the KSLV-I nitrogen gas reaction control system are summarized. It is shown that, based on the experimental data, operational performances of nitrogen gas reaction control system can be analyzed in terms of gas consumption, thrusting force, time delay, and specific impulse. It is also shown that a conformance of the controller to flight can be evaluated. Finally the onboard controller of KSLV-I reaction control system is shown to perform normally with enough stability margin via the first flight test result.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.30-30
• /
• 1998

다목적 실용위성의 자세 제어용으로 장착되는 하이드라진 단일 추진제 추력기의 연소성능 특성을 살펴보았다. 일차적으로, 연소기내의 화학 평형 계산을 통하여 하이드라진 연소 생성물인 암모니아의 분해율과 초기 엔탈피 수준에 따른 추력기의 성능 특성을 살펴보았다. 다음 순서로, 연소기 내의 비평형 화학 반응 계산을 통하여 연소진행 시간에 화학 조성 및 성능 특성을 살펴 볼 수 있었으며, 최종적으로, 점성 및 비점성, 동결 및 비평형 화학 반응 해석에 따른 성능 특성 변화를 살펴보았다. 본 연구 결과로부터 각 작동 변수에 따른 추격기 성능 특성의 변화를 이해할 수 있었으며, 이는 단일 추진제 추력기 연소실의 구성, 설계 및 추력기의 운용 조건 설정에 중요한 자료로 이용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.14-17
• /
• 2011

Numerical simulation was carried out for the SNECMA modulatable thrust devices, with four different nozzle contraction angle $45^{\circ}$, $60^{\circ}$, $83^{\circ}$, and $90^{\circ}$, respectively. Results show that $83^{\circ}$ nozzle contraction is better in that it comes up with good thrust level with small aerodynamic load.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.399-404
• /
• 2010

Test results including the variation of propellant-inlet pressure, pulsed thrust, and environment vacuum with the accompanying thermal responses are presented for the pulse-mode operation of a set of monopropellant hydrazine thrusters producing $0.95lb_f$ of nominal steady-state thrust at an inlet pressure of 350 psia. The test data are reduced into the impulse bit, specific impulse, and force centroid that are the factors typically characterizing pulse-mode performance of small rocket engines. With a scrutiny to the performance parameters, their comparison to the reference criteria of 1 lbf standard monopropellant rocket engine are successfully made.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.32-38
• /
• 2004

A comprehensive understanding is given for the hot-firing test results, which were obtained throughout the verification program of mono-propellant hydrazine rocket engines (thrusters) producing 0.95 lbf (4.2 N) of nominal steady-state thrust at an inlet pressure of 350 psia (2.41 Mpa). A scrutiny for the engine performance is made in terms of thrust and temperature behavior of steady state firing mode at the given propellant injection pressures: Pinj = 400, 250, 100, and 50 psi. The thrust and specific impulse are compared with a reference performance of 1-lbf standard rocket engines and their normalization procedure is introduced. A practical engineering approach to the data measurement and reduction is addressed, too.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.109-112
• /
• 2008

A performance of micro thruster was measured with catalyst bed that was prepared by different catalyst loading condition for the optimization of catalyst bed size. Among the catalyst loading conditions, pH level of precursor solution was changed by several solutions like Nitric acid or Sodium hydroxide. For the each case, it was heated at different drying temperatures that can affect the phase of catalyst loaded on support. From these results, it was studied that the effect of catalyst loading condition on the performance. 90wt% hydrogen peroxide was used as a monopropellant, and platinum was chosen as a catalyst. Characteristic velocity efficiency and temperature efficiency were used for the performance evaluation.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.133-137
• /
• 2002

리니어 모터 중에서 위치 정밀도가 우수하고 개루프 제어가 가능한 리니어 펄스모터(LPM : Linear Pulse Motor)에 대해 추력 성능 및 위치제어 정밀도 향상을 위해서 자기등가회로 모델링법에 의해 추력을 주로 계산하고 있다. 퍼미언스(Permeance) 모델법, 수치해석법(FEM), 속도 기전력법 등을 이용하여 자속밀도(B)를 구하는데 있어 해석적인 추력편차가 존재한다. 정확한 추력을 구하기 위해서는 이들 각각의 방법을 이용한 로렌츠 포스법(Lorentz Force Method), 자기수반 에너지법, Maxwell 응력법 등으로 추력을 계산하여 비교함으로써 모터용량, 파라미터 등의 각종 성능 비교시 중요 요소가 될 수 있다. 이에 본 연구는 위의 방법으로 LPM의 추력을 수식화하여 값을 얻고, 실제 추력값을 측정하여 얻어진 값과 비교 분석하고자한다. 이러므로 보다 정확한 LPM 추력 계산 방법을 얻을 수 있을 것으로 기대된다.