• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.2
• /
• pp.10-16
• /
• 2012

A computational analysis of nozzle flow characteristics and plume structure is conducted to examine performance of the supersonic nozzle employed in a thruster for ground firing test. At first, flow simulations in two-dimensional converging-diverging nozzle are performed for the verification of computational capability as well as turbulence model validity. Axisymmetric converging-diverging nozzles for ground firing test are analyzed with the k-${\omega}$ SST model. A performance penalty caused by flow separation in a diverging section is observed in initially-designed nozzle. The performance could be enhanced by the modification of the diverging section of nozzle contour.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.54-60
• /
• 2006

This paper discusses wheel offloading approaches of the COMS which has a single solar array system for the accommodation of the optical payloads. First of all, in an effort to reduce fuel consumption and reflect practical implementation point of view, thruster sets for wheel offloading are proposed based on numerical analyses taking into account the COMS configuration. In this analysis, it is assumed that the wheel offloading is conducted twice a day. Secondly, in order to evaluate the effectiveness of the proposed thruster sets, orbit simulations are conducted for several wheel offloading approaches and compared.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.697-703
• /
• 2017

A teflon ionization modeling has been conducted to predict the performance of a PPT(Pulsed Plasma Thruster). One dimensional unsteady circuit model and Teflon ablation model were implemented. The Saha equation was adapted to predict the ionization of Carbon and Fluorine gas. The lumped circuit model including a resistance and a inductance model of a plasma was adapted to predict the magnitude of a discharge current. Numerical simulation results had good agreements with pervious research. The degree of current change according to PPT operating voltage was examined.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.407-412
• /
• 2006

Most of the monopropellant thrusters use catalyst for decomposing hydrazine. The thruster lifetime is determined mainly by catalyst lifetime, which can be investigated by firing tests. For the development of hydrazine decomposition catalyst, Hot-fire test to verify long-life performance of catalyst is required. This study describes the development of test equipment for long duration hot-firing and test/evaluation plan.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.269-272
• /
• 2009

Catalytic decomposition of nitrous oxide was investigated experimentally. Two noble metal catalyst (Pt, Ir) were chosen to decompose nitrous oxide. Each catalyst was tested with different chamber pressure and preheating temperature. Ir decomposed $N_2O$ at lower temperature ($230^{\circ}C$) and suitable for $N_2O$ decomposition. In addition, the minimum required preheating temperature decreased as the chamber pressure increased. However, deactivation of Ir catalyst was observed during the experiments.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.122-126
• /
• 2009

KSLV(Korea Space Launch Vehicle)-I is designed as a launch vehicle to enter a 100 kg-class satellite to the LEO(Low-Earth Orbit). Attitude angles of the upper-stage, including roll, pitch and yaw are controlled by cold gas thruster system using nitrogen gas. To verify the flow rate of the gas charging system and to prepare a nitrogen gas charging scenario, the development of a gas charging simulator for RCS(Reaction Control System) is required. This paper describes the orifice design, development, and test of the gas charging simulator for RCS of KSLV-I.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.102-105
• /
• 2007

The performance evaluation of the micro thruster utilizing hydrogen peroxide decomposition is described. The catalyst bed was made of porous ceramic material($Isolite^{(R)}$) with large surface to mass ratio. 14%wt platinum was loaded on the catalyst support as a catalyst. Hydrogen peroxide with 85% concentration was used as a monopropellant. The length of the catalyst bed and the feed pressure of the hydrogen peroxide were taken as the parameters for the experiment. All experiments were carried out under cold start condition for 30 seconds. The $c^*$ efficiency was evaluated for each test case using measured pressure data. For the catalyst support length of 30 mm and feed pressure at 5.51 bar, satisfactory $c^*$ efficiency beyond 95% was observed.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.189-199
• /
• 2013

This paper summarizes results of second stage attitude control of KSLV-I third flight test. The results show that three axes attitude control at coasting phases of KSLV-I was successfully accomplished by the reaction control system, and pitch and yaw attitude control at thrusting phase where second stage kick motor burns was also normally accomplished by using the thrust vector control system. It is verified that the second stage controller performed successfully for all flight phases regardless of some disturbances due to mass center offset, slag effects, and residual thrust of kick motor. These results may provide an important basis in enhancing domestic technology level of attitude control of launch vehicle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.739-745
• /
• 2017

Research of ADN-based monopropellant thruster is progressed by developed countries in Europe to replace toxic hydrazine, and ADN-based monopropellant thruster system is the only system that was proved in space environment. In this research, ADN-based propellant and catalyst was fabricated to develop ADN-based monopropellant thruster, and catalytic combustion performance with fabricated propellant and catalyst were evaluated with DSC-TG analysis. Catalytic combustion of propellant and catalyst was determined with firing test using 5 N scale liquid monopropellant thruster.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.409-411
• /
• 2017

미사일 추력기 체계에 적용되는 하이드라진[$N_2H_4$]추진제는 MSDS-OHS 유해성 분류상 급성독성 물질로서 사용이 제한되고 있는 바, 다양한 대체물질이 개발 중이다. 최근 해외에서 안전성과 취급이 우수한 질산 히드록실암모늄[$NH_3OHNO_3$]과 암모늄 디나이트라마이드[$NH_4N(NO_2)_2$] 기반 단일계 액상추진제가 개발중이며, 이 물질들을 이용한 추력기 시스템 적용 시험이 진행되고 있다. 그러나 저온에서의 연로물질 산성화 반응으로 인한 디나이트라마이드[$N(NO_2)_2{^-}$] 물질의 분해는 나이트레이트[$NO_3{^-}$] 이온 생성을 촉진시키며, 부수적으로 발생하는 침전물은 촉매 및 노즐의 막힘 현상을 유발하므로 추력기 성능의 저해요인으로 작용한다. 그러므로 저온분해 방지를 위한 첨가제 조성 개발 및 열분해 특성 연구가 최근의 관심사이다. 본 연구는 합성/정제/추출한 암모늄 디나이트라마이드 산화제를 주요 조성물로 적용하였으며, 염기성 안정화제를 질량비율 4~5% 첨가하여 산성화 반응을 억제시킨 단일계 액상추진제(KMP) 형태로 제조하였다. 합성한 추진제는 시차주사열량계(DSC)를 이용하여 분해온도를 측정하여 열안정성을 평가해보았다.