• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.558-563
• /
• 1993

To reveal the effect of synthetic detergent on the water pollution as a preliminary step, we measured the primary biodegradation and ultimate biodegradation with three kinds of dishwashing detergents being sold at market. Consequently, the primary biodegradation of above mentioned samples were suited to Korean Standards. Above all, the goods that has fast primary biodegradation shows the tendency to fast ultimate biodegradation.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.555-561
• /
• 2005

A new graphical method was developed to separate two distinctive decay rate coefficients($k_1$ and $k_2$) at their respective degradable substrate fractions($S_1 and $S_2$). The mesophilic batch reactor showed $k_1$ of $0.151\;day^{-1}$ for wasted activated sludge(WAS), $0.123\;day^{-1}$ for thickened sludge(T-S), $0.248{\sim}0.358\;day^{-1}$ at S/I ratio of $1{\sim}3$ for sorghum and $0.155{\sim}0.209\;day^{-1}$ at S/I ratio $0.2{\sim}1.0$ for swine waste, whereas their long term batch decay rate coefficients($k_2$) were $0.021\;day^{-1}$, $0.001\;day^{-1}$, $0.03\;day^{-1}$ and $0.04\;day^{-1}$ respectively. At least an order of magnitude difference between $k_1$ and $k_2$ was routinely observed in the batch tests. The portion of $S_1$, which degrades with each $k_1$ appeared 71% for WAS, 39% for T-S, 90% for sorghum, and $84{\sim}91%$ at S/I ratio of $0.2{\sim}1.0$ for swine waste. Ultimate biodegradabilities of 50% for WAS, 40% of T-S, $82{\sim}92%$ for sorghum, and $81{\sim}89%$ for swine waste were observed.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.387-395
• /
• 2015

Anaerobic mesophilic batch test of several organic wastes were carried out by a graphical statistic analysis (GSA) to evaluate their ultimate biodegradability and two distinctive decay rates ($k_1$ and $k_2$) with their corresponding degradable substrate fractions ($S_1$ and $S_2$). Each 3 L batch reactor was operated for more than 100 days at the substrate to inoculum ratio (S/I) of 0.5 as an initial total volatile solids (TVS) mass basis. Their Ultimate biodegradabilities were obtained respectively as follow; 69% swine waste, 45% dairy cow manure, 66% slaughterhouse waste, 79% food waste, 87% food waste leachate, 68% primary sludge and 39% waste activated sludge. The readily biodegradable fraction of 89% ($S_1$) of Swine Waste BVS ($S_o$) degraded with in the initial 31 days with $k_1$ of $0.116day^{-1}$, where as the rest 11% slowly biodegradable fraction ($S_2$) of BVS degraded for more than 100 days with the long term batch reaction rates ($k_2$) of $0.004day^{-1}$. For the Food Waste and Waste Activated Sludge, their readily biodegradable portions ($S_1$) appeared 89% and 80%, which degrades with $k_1$ of $0.195day^{-1}$ and $0.054day^{-1}$ for an initial 15 days and 28 days, respectively. Their corresponding long term batch reaction rates ($k_2$) were $0.003day^{-1}$ and $0.002day^{-1}$. Results from other organic wastes are addressed in this paper. The theoretical hydraulic retention times (HRTs) of anaerobic digesters treating organic wastes are easily determined by the analysis of multiple decay rate coefficients ($k_1$ and $k_2$) and their corresponding biodegradable substrate fractions ($S_1$ and $S_2$).

• KSBB Journal
• /
• v.19 no.2
• /
• pp.132-137
• /
• 2004

Biodegradability test for various synthetic lubricant oil bases derived from biodiesel was carried out. The biodegradability was estimated under aerobic aqueous condition, according to the method by OECD 301 B, which is based on CO$_2$ evolution test. The ultimate biodegradability of pentaerythritol methyl esters were estimated as 61.1∼80.3%, at 28 day with which the test compounds were indicated as ultimately biodegradable. Among the tested samples, biodiesel showed the highest biodegradability (83.5%). The validation with several criteria, regarding relative errors of test results, toxicity control and procedure control, was performed through the biodegradability test. The test procedure was validated for all the tested lubricant oil bases and biodiesel, except for petroleum diesel.

• The monthly packaging world
• /
• s.87
• /
• pp.194-198
• /
• 2000

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1038-1045
• /
• 2010

In this study, the anaerobic ultimate biodegradability and multiple decay rate of organic matter were evaluated according to various salt concentrations in seafood processing wastewater. The evaluation was also performed with various types of anaerobic bacteria and S/I (substrate/inoculum) ratios. After the S/I ratio was fixed at 0.9, the ultimate biodegradability values of the anaerobic digested sludge and granular sludge were became 72.0% and 92.0%, respectively. The multiple decay rate coefficients ($k_1$) coefficients of the anaerobic digested sludge and granular sludge were $0.0478{\sim}0.1252\;day^{-1}$ and $0.0667{\sim}0.1709\;day^{-1}$, respectively. The optimum S/I ratio of the seafood wastewater, which was determined based on the ultimate anaerobic biodegradability and gas production, was 0.9. The organic matter removal rate never became less than 85.0% under a 3,000 mg/L chloride concentration. The multiple decay rate coefficients ($k_1$) were $0.1603{\sim}0.1709\;day^{-1}$ under $3,000\;mgCl^-/L$, and $0.0492{\sim}0.0760\;day^{-1}$ in more than $6,000\;mgCl^-/L$. The multiple decay rate coefficients ($k_2$) were $0.0183{\sim}0.0348\;day^{-1}$ under $6,000\;mgCl^-/L$, and $0.0154\;day^{-1}$ at $9,000\;mgCl^-/L$. With increasing chloride concentrations, the reaction rate ($k_1$, $k_2$) and ratio of the rapidly degraded organic matter ($S_1$) decreased.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.285-290
• /
• 2008

Various methods (OECD 301B, ISO 9439 and ASTM 5864) for biodegradability test of lubricants were reviewed, and a standard procedure was developed. Most lubrication products are released in rivers or sea then is degraded by microbial action in aerobic condition. Most international method are based on $CO_2$ evolution test. Inoculum obtained from a sewage disposal plant and test compound are cultivated in a mineral medium. Organic carbon of the test compound is degraded and oxidized through the enzymatic actions of inoculum, and ultimately mineralized to carbon dioxide. Biodegradability test conditions of lubricant oils were optimized. The highest biodegradability was achieved when the same medium as in ASTM 5864 and inoculum concentration of $10^4{\sim}10^5$ cell/L were used. The optimum standard materials were selected as aniline and sodium acetate. Additionally the effects of inoculum type on microbial growth and biodegradability were examined. Finally the standard operating procedure (SOP) for biodegradability test method was proposed.

• Journal of Life Science
• /
• v.13 no.6
• /
• pp.970-975
• /
• 2003

Microbial trichloroethylene (TCE) degradation using trickling biofilter (TBF) is a cost-effective treatment method, in which monooxygenase (MO) fortuitously transforms TCE via cometabolism. Simple TBF, however, could not be stably operated for long-term treatment of TCE due to the contradictory characteristics of cometabolism. In this paper, microbial biocatalyst and biofilm reactor system, a two-stage continuous stirred tank reactor (CSTR)/TBF system using Burkholderia cepacia G4 and Methylosinus trichosporium OB3b, are evaluated for the long-term continuous treatment of TCE. The maximum TCE elimination capacities were in the range of 28 and 525 mg TCE/1$.$day. The reactor systems were stably operated for more than 3∼12 months.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.491-496
• /
• 2008

The microsomal epoxide hydrolase gene (referred to as mMCEH) of Mugil cephalus was cloned by PCR, and then inserted to pColdI and pET-21b(+) vector, respectively. The recombinant E. coli possessing the recombinant plasmids exhibited the enantioperference toward (R)-styrene oxide. When enantioselective kinetic resolutions were conducted with 20 mM racemic styrene oxide, enantiopure (S)-styrene oxide was obtained with high enantiopurity more than 99% enantiomeric excess (ee) and 24.50% yield by using the recombinant E. coli harboring pET-21b(+)/mMCEH.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.561-569
• /
• 2014

This study was carried out to get the characteristics of anaerobic digestion for chemical/biological sludge produced from municipal sewage treatment plant for phosphorus. Anaerobic mesophilic batch tests showed that the ultimate biodegradability of waste activated sludge showed 31%, PACl sludge 24%, Alum sludge 26%, respectively. At the S/I 1.0, 75% of total biodegradable volatile solids (TBVS) of waste activated sludge was degraded with an initial rapid decay coefficient, k1 of $0.1129day^{-1}$ and 74% of TBVS of PACl sludge with k1 of $0.0998day^{-1}$, and 76% of TBVS of Alum sludge with k1 of $0.1091day^{-1}$ for 20 days. During the operation of SCFMRs, the 3 reactor (Control, PACl, Alum) pH maintained 6.7~7.0 and the reactor alkalinity maintained 1,800~ 2,200 mg/L as $CaCO_3$. The average biogas production rates of SCFMRs fed with PACl sludge and Alum sludge were 0.089 v/v-d and 0.091 v/v-d, respectively, which was 27~28% lower than that of the control (0.124 v/v-d) at an HRT (hydraulic retention times) of 20 days. And the methane content during the operation ranged 70~76% in 3 reactor. The average TVS removal efficiency of SCFMRs fed with PACl sludge and Alum sludge were 19.6% and 19.9%, respectively, at an HRT of 20 days, which showed 4% lower than that of the control (23.8%). The average BVS removal efficiency of SCFMRs fed with PACl sludge and Alum sludge were 25.8% and 26.9%, respectively, at an HRT of 20 days, which was 8~9% lower than that of the control (34.5%).