• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.285-290
• /
• 1992

VTR(Video Tape Decoder) 데크(deck) 메카니즘의 조립과정중 최종공정인 주행계 조정공정은 비디오 테이프와 영상 헤드, 음성/콘트롤 헤드의 상대위치를 맞추는 공정으로 VTR의 화질을 좌우하게 된다. 본 연구에서는 주행계 조정나사들을 조정하는 나사조정장치와 이를 제어하여 VTR 데크 메카니즘의 주행계를 자동으로 조정하는 제어시스템을 설계, 제작하였다. 본 연구에서 개발된 VTR 데크메카니즘의 주행계 자동조정장치는 5개의 조정 나사를 모두 조정 가능하도록 구성되어 있기 때문에 시행착오로 인한 반복 조정 작업이 가능하게 되었다. 이것으로 공정의 합리화 및 자동화를 통한 공정의 무인화를 이루는 것이 본 연구의 목적이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1421-1424
• /
• 2000

홈페이지는 하이퍼미디어를 사용하여 작성하는 것이 보퉁이다. 본 연구의 최종 목적은 이를 확장하여 멀티미디어 시나리오를 작성하여 홈페이지에 삽입할 수 있는 기능을 제공하는 것이다. 이를 위하여, 본 논문은 시나리오 표현 방식을 제안하고, 이렇게 표현된 시나리오를 웹브라우저에서 해석하여 상영하는 프로그램의 설계를 소개한다. 인터넷이 아닌 PC에서 시나리오를 작성하는 환경을 제공하고 작성된 시나리오를 상영하여 주는 멀티미디어 저작 도구는 이미 많이 나와 있지만, 홈페이지에 멀티미디어 시나리오를 삽입하고 이를 해석하여 상영하여 주는 소프트웨어 개발 사례는 별로 없다. 본 연구는 웹페이지에 멀티미디어 시나리오를 손쉽게 삽입할 수 있는 소프트웨어 개발의 계기가 될 것으로 본다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.484-486
• /
• 2000

일러스트레이션은 물체를 표현하는 최소한의 특징만을 가지고 사물을 표현하는 방법이다. 이를 자동화한 많은 연구들은 주로 많은 스트록을 이용하여 실제와 유사한 일러스트레이션 결과를 생성하고자 하였다. 본 연구는 물체의 특징만을 표현할 수 있는 적은 스트록을 이용하여 일러스트레이션을 생성하는데 목적을 둔다. 이를 위해 우리는 이전 연구[1]에서 간단히 추출된 경계선과 두 가지 스트록 모핑기법을 제시하였다. 본 논문에서는 물체의 특징을 표현하기 위해 유용한 경계선 추출 방법을 제시한다. 정확한 경계선의 추출은 스트록과 더불어 최종 일러스트레이션 결과에 많은 영향을 미친다. 경계선 추출 방법과 이전 논문의 스트록 모핑 방법을 이용한 일러스트레이션 결과는 본 논문의 실험결과로 주어졌다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.195-201
• /
• 2001

Sowing date experiments were carried out by employing a rice variety "Kwanganbyeo" in both field and phytotron with natural daylength. In phytotron, temperatures were controlled at daily mean of 21$^{\circ}C$ and 24$^{\circ}C$. The responses of final leaf number and beading date were analyzed in relation to daylength during photo-sensitive period (PSP). Based on the component models predicting the final leaf number and leaf appearance rate, a rice phenology model was established and verified. Days from sowing to flowering (DSF) were shortened and final number of leaves (FNL) increased as sowing dates were delayed from 25 April to 5 June in field and phytotron. The increased leaf appearance rate (LAR) and the reduced FNL, respectively, due to the higher temperature and the shorter daylength in delayed sowings in the field brought about greater shortening of DSF than in the phytotron where only FNL was reduced by shorter daylength in delayed sewings. FNL showed very close relationship with the average daylength during PSP of six-leaf stage to panicle initiation, being well fitted to the following rational function ($R^2$=0.98):(equation omitted) where D is daylength and a, b, and c are the constants that were estimated as 14.694, -0.992, and -0.068 in Kwanganbyeo, respectively. The rice phonology model, which was composed of two component models for LAR and FNL, predicted DSF very accurately. The differences between the observed and predicted DSF was less than two days in the sewing date field experiments in 1999 and 2000 of which data were not used for the model construction.struction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.427-435
• /
• 2017

The most important factor in the treatment of fully edentulous patients using implants is the shape of the definitive prosthesis. After the shape of the definitive prosthesis is determined, residual bone analysis and selection of the implant type, number and position should be followed. In this case, for restoration of an edentulous patient fully implanted (except the maxillary right lateral incisor) without considering definitive prosthesis, facial esthetics and possibility of fixed type prosthesis were evaluated using complete denture. It was determined that the fixed type prosthesis was possible. Implants that could not be used for the definitive prosthesis were excluded from the treatment plan and fixed type provisional restorations were fabricated. After four months of provisional restorations, the patient showed stable occlusion and esthetic satisfaction. Definitive prosthesis was made of zirconia using CAD/CAM (computer aided design and computer aided manufacturing). The results were satisfactory during the 3 months of follow-up period after termination of treatment.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.158-167
• /
• 2012

The purpose of this paper is to examine the factors that encouraged the industrial growth of Koran city gas industry during 1995-2009, by carrying out input-output structural decomposition analysis(IO-SDA) using Syrquin's model. The results show that the main factors which contributed to the growth of the Korean city gas industry are final domestic demand(48.4%) and technological change(38.6%). By examining the results for the three periods of 1995-2000, 2000-2005, and 2005-2009, the tendency of changes between the two main factors is drawn. In contrast to the drastic decreasing tendency of the final domestic demand's contribution to the growth, 84.5%, 18.9%, and 15.4%, respectively for each period, there is an increasing tendency for technological change as seen by the results of 7.4%, 70.0%, and 42.2%, respectively. These findings may be a result from the fact that the rate of gas supply in the residential sector has been saturated recently. They are also reflective of the energy consumption trend of industrial activities as there has been a shift in the approach for supplying energy, from the traditional approach which use fossil fuels to the newer approach which uses environmentally friendly energy sources. For the continued growth of the city gas industry, policymakers sould consider greater investment in the expansion of city gas supply infrastructure for industrial activities rather than for the residential sector.

• Environmental and Resource Economics Review
• /
• v.23 no.2
• /
• pp.305-330
• /
• 2014

There has been a lot of studies to identify the driving forces of energy consumption. Many of them decomposed the final energy consumption into the intensity effect, structural effect, and production effect. Those approach, however, could not consider the transformation loss during the electric power generation. Therefore, in this study, we conducted a decomposition analysis on the primary energy use basis to reflect that transformation loss. Log mean Divisia index and refined Laspeyres methods were used for the index decomposition. As results, we could find out that the difference between two approaches were definite. The intensity effect in 2011 is -0.607 times against 1981 in the final energy case, but -0.236 times in the primary energy case. The structure effect in 2011 is 0.227 times against 1981 in the final energy case, but 0.434 times in the primary energy case. Therefore, an analysis on the primary energy basis is essential when conducting a decomposition analysis.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.524-537
• /
• 2017

Post-Environmental impact investigation(Post-EII) plays an important role in investigating and reducing the environmental impacts of construction operations in South Korea. To date, it has been estimated that the results for Post-EII showed the low reliability; however, understanding those reliability has rarely been studied. We investigated the effect on water qualities by construction operations of the quarry mine, training center, and golf club in South Korea. In addition, the results of water quality analysis in this study were compared and analyzed with those in Post-EII. Treated wastewater in a quarry mine showed high concentrations of biochemical oxygen demand(BOD), suspended solid(SS), total nitrogen(T-N), and total phosphorus(T-P). Compared with the water quality results between this study and Post-EII, the concentrations of BOD, SS, T-N, and T-P in the treated wastewater were higher than the interquartile range(IQR) as well as the range of the results from minimum to maximum in Post-EII(p<0.05). The concentrations of BOD, SS, T-N, and T-P in treated wastewater were high under constructions in a training center. The concentrations of BOD and SS exceeded the consultation standard for the treated wastewater. These concentrations showed the significant difference with the IQR and the range from minimum to maximum of the water quality results in Post-EII(p<0.05). Therefore, the management and monitoring for water quality should be conducted in the treated wastewater by of construction operations. In addition, the alternative to enhance the reliability for the water quality results should be sought in Post-EII.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2004

This study was carried out to evaluate the microbiological quality of beef carcasses at different slaughtering process in large (>100 cattle/day) and small (<30 cattle/day) scale slaughtering houses. Swabbing method was used to analyze the incidence of microorganisms on brisket surface of beef carcasses in each process of after dehiding, after evisceration, before and final wash, and in cold room. In winter time, large scale slaughterhouse showed lower incidence of aerobic microorganisms (10$\^$0/∼10$^2$ CFU/$\textrm{cm}^2$) than those of small scale slaughterhouse (10$\^$0/-10$^3$ CFU/$\textrm{cm}^2$) during the slaughtering process of after dehiding, evisceration and before final wash. But samples from carcasses after final wash and in cold room storage showed no difference in aerobic cell counts between large and small scale slaughterhouse. In spring time, samples showed higher incidence of microorganisms by the log scale 1 than those of winter time in both of small and large scale slaughterhouse. After final wash, different sampling place in carcass such as rump, flank, brisket showed the different washing effect in both of small and large scale slaughterhouse. After final wash, samples from rump showed lower aerobic cell counts, but samples from flank and brisket showed higher aerobic cell counts than samples from each site before final wash.