• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.451-459
• /
• 2002

High strength flour (12.5% protein) and low strength flour (10.5% protein)were used to determine optimum formulation far steamed bread added with green tea powder (GTP). The response surface study consisted of the following independent variables : GTP (1.5∼4.5%), mixing time (8∼14 min), fermentation time (30∼50min). Bread Quality attributes measured for total bread score of each combination were loaf volume, spread ratio, surface glossiness, smoothness, grain and texture (firmness, cohesiveness, elasticity and adhesiveness). The required amount of GTP, mixing time and fermentation time for steamed bread made from two kinds of flour were different. GTP could be more added to lower strength flour than higher strength flour without losing bread quality. GTP highly affected the loaf volume, spread ratio, surface smoothness, firmness and total bread score of steamed bread (p<0.001). The results suggested that the functional steamed bread added with GTP having excellent quality can be made from low strength flour using green tea powder 3.2%, mixing time 11 min 8 sec and fermentation time 39 min 55 sec.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.1-9
• /
• 2009

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. When correcting or modifying the software, because of the possibility of introducing new faults when correcting or modifying the software, infinite failure non-homogeneous Poisson process models presented and propose an optimal release policies of the life distribution applied fixed shape parameter distribution which can capture the increasing/decreasing nature of the failure occurrence rate per fault. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, make out estimating software optimal release time

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.129-138
• /
• 2014

This paper proposes a fast intra prediction method to reduce encoding time for the HEVC(high-efficiency video coding) encoder. The proposed fast Intra prediction method uses quadtree structure and SATD(Sum of Absolute Transformed Differences). In HEVC, a $8{\times}8$ SATD value using $8{\times}8$ hadamard transform is used to calculate a SATD value for $8{\times}8$ or larger blocks. The proposed method calculates the best SATD value by using each $8{\times}8$ SATD result in $16{\times}16$ or larger blocks. After that, the proposed method removes a candidate mode for RDO(Rate-Distortion Optimization) based on comparing SATD of the candidate mode and the best SATD. By removing candidate modes, the proposed method reduces the operation of RDO and reduces total encoding time. In $8{\times}8$ block, the proposed method uses additional $4{\times}4$ SATD to calculat the best SATD. The experimental results show that the proposed method achieved 5.08% reduction in encoding time compared to the HEVC test model 12.1 encoder with almost no loss in compression performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.302-302
• /
• 2022

최근 태풍, 집중호우로 인한 홍수피해가 빈번히 발생함하고 있다. 특히 상류에 저수지가 있을 경우 홍수조절을 통해 하류지역의 홍수피해를 저감하기도 하지만 급작스런 방류량의 증가 등으로 인해 하류지역의 피해가 증가되는 경우도 있다. 따라서 하류지역 홍수피해 저감을 위해 저수지의 홍수관리기능에 대한 관심도가 높아지고 있다. 대규모 다목적댐의 경우 다양한 저수지운영룰을 통해 수문을 운영하고 있어 홍수조절기능을 충분히 수행하고 있지만, 농업용저수지는 홍수관리에 있어 수문조작 전문성의 부족과 운영룰의 미정립 등으로 인해 취약성을 가지고 있는 상황이다. 본 연구에서는 수문이 설치된 1백만m³이상의 저수지 중 성주저수지를 연구대상저수지로 선정하였다. 비상수문을 통한 사전방류방안과, 저수지운영을 연구하여 농업용저수지의 홍수조절용량 확보를 위한 사전방류방안에 대해 연구하였다. 저수지운영은 Auto ROM을 적용하였고 홍수조절용량 확보를 위하여 홍수기 수위관리기법 중 사전방류기법을 채택하였다. 사전방류기법은 모의기법에 의한 사전방류와 최적화기법에 의한 최적사전방류량을 결정하는 방법으로 연구하였다. 홍수기의 제한수위는 유효저수량의 70%인 EL.179.7m, 65%인 EL.178.8m, 60%인 EL.177.8m로 설정하여 분석하였다. 모의기법에 의한 사전방류방법은 초기수위는 만수위에서부터 1.0m씩 감소하였고, 비상수문은 0.5m씩 개방하여 4.0m까지 개방 하였다. 사전방류의 시간은 24hrs, 48hrs를 적용하였다. 최적화기법에 의한 사전방류방법은 초기수위는 모의기법과 동일하고 목표수위를 제한수위(70%, 65%, 60%)가 되는 최적방류량을 산정하고 최적방류량을 방류할 수 있는 수문의 개방높이를 분석하였다. 2012년, 2020년의 호우사상에 대해 사전방류가 없는 경우와 모의기법, 최적화기법에 의한 사전방류결과를 적용한 경우를 비교하여 검토하였다. 그 결과 제한수위 70%를 유지할 경우 2012년은 모의기법이 5.6%, 최적화기법이 5.4%의 방류량 감소효과가 있으며 2020년은 모의기법이 9.0%, 최적화기법이 8.8%의 방류량 감소효과가 있는 것으로 검토되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.212-215
• /
• 2009

요구되는 접착력과 그라프트율을 만족시킬 수 있는 변성폴리프로필렌의 제조 기술 확립을 목표로 변성폴리프로필렌의 최적 합성을 위한 과산화물, 변성폴리프로필렌의 최적 합성을 위한 촉매 및 반응몰비, 변성폴리프로필렌의 최적 합성을 위한 반응온도, 반응시간 확립을 통한 변성 PP 제조기술을 개발하였으며, $90{\Phi}$ extruder에서 상업 생산을 위한 공정 제어 기술 확립과 접착력과 그라프트율 등을 나타내는 변성폴리프로필렌의 최적 합성 조건 확립을 통한 폴리프로필렌 엘라스토머 복합수지용은 물론 강관 코팅용, 시트 및 필름용 등의 변성 폴리프로필렌 제조기술을 개발하였다. 이들 변성 PP를 활용하여 매트릭스 및 필러, 분산 조건 변경 시험, 엘라스토머 폴리프로필렌 컴파운드 최적 분산 조건 확립, 엘라스토머 폴리프로필렌 컴파운드 pilot 생산 및 제품 분석을 통하여 초고강성 범퍼, 룸미러 케이스 소재, 인패널, 도어용으로 사용될 수 있는 자동차 부품용 폴리프로필렌 복합수지 개발을 완료하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1139-1148
• /
• 2000

To treat and recycle a large quantity of converter slag. the milling properties of -14/ +24 mesh-sized slag has been considered. The optimal conditions in milling process were investigated for producing powder-type slag and the required consumption was derived for the economical grinding. The characteristics of milling processes were studied in the variation of the rotational speed, milling time, filling ratio of ball, and size and amount of feed. The grinding efficiency was also examined. The optimal rotational speed in this experimental condition was observed to be the value of 79% of critical speed. The extent of grinding was increased with increasing the grinding time. but the efficiency of milling was decreased with the time. 50% ball filling was shown to have the optimal grinding effect, and less amount and small-sized feed made the milling efficiency high. As the result, using Bond's equation, power required for efficient milling was considered and the highest value was observed in the condition of high grinding time and optimal rotational speed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.387-396
• /
• 2003

This paper provides an approximation algorithm for STP-MSP(Steiner Tree Problem with minimum number of Steiner Points).Because it seems to be impossible to have a PTAS(Polynomial Time Approximation Schemes), which gives the near optimal solutions, for the problem, the algorithm of this paper is an alternative that has the approximation ratio 2 with $n^{O(1)}$ run time. The importance of this paper is the potential to solve other related unsolved problems. The idea of this paper is to distribute the error allowance over the problem instance so that we may reduce the run time to polynomial bound out of infinitely many cases. There are earlier works[1,2] that show the approximations that have practical run times with the ratio of bigger than 2, but this paper shows the existence of a poly time approximation algorithm with the ratio 2.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.4
• /
• pp.287-294
• /
• 2005

Three different gruels; $100\%$ rice, $70\%$ rice and $30\%$ sprouted black bean with sprout, and $100\%$ rice and $70\%$ sprouted black bean, were prepared. Organoleptic, chemical and rheological properties were compared according to the heating time and the quantity of water. Regarding to the the rheological properties, the gruel with $30\%$ rice and $70\%$ sprouted black bean with sprout revealed the lowest level of solidity and the highest level of viscosity among these three kinds of gruels. The chemical properties; pH, total sugar content and amylose content were similar each other. In terms of organoleptic properties, the best gruel was made with $30\%$ rice and $70\%$ sprouted black bean with sprout. In addition, the best cooking condition was found that 9 times of water to the weight of rice and sprouted black bean with sprout, was used follows by 40 minutes' heating.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.415-417
• /
• 1999

환경연구자들은 대기환경의 개선과 환경기준의 목표달성과 최적 제어기술을 개발하기 위해 각종 모델을 이용하고 있다. 초기 단계에서는 각종 오염인의 배출자료와 기상자료를 이용하여 대기 중 분진의 농도를 추정하는 분산모델 (dispersion model)이 오랜 기간동안 활발하게 이용되어 왔다. 그러나 분산모델은 배출자료의 오차, 수직ㆍ수평적 분산변수의 불확실도, 복잡한 모델 개발에 따른 시간과 비용 등의 문제점을 가지고 있으며, 모델에 포함된 변수에 의해 특성화된 오염원에 대해서만 농도의 추정이 가능하다는 제약점이 있다.(중략)

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.8
• /
• pp.529-538
• /
• 1987

The time optimal position control scheme based on the Pontryagin's minimum principle is proposed in the current source inverter(CSI) fed induction motor system. The field oriented induction motor system is modelled with a second order plant and a switching curve is obtained by solving Hamiltonian equation. The validity of time optimal control solution has been verified by experimental tests carried out with a prototype MC68000 based microcomputer system, and 5Hp induction motor. Experimental results are in a close agreement with those the digital simulation ones.