• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.175-178
• /
• 2011

서버 클러스터는 성능을 보장하기 위하여, 요청 수에 상관없이 미리 측정된 최대 부하 시점에서 처리 가능한 서버 수를 항상 운영하고 있다. 이것은 서비스의 품질은 보장할 수 있으나, 소비 전력 효율이 낮아 상당한 전력을 낭비하는 단점이 있다. 본 논문에서는 사용자 요청 수에 기반하여 동작시킬 서버의 수를 결정하는 알고리즘을 제안한다. 제안된 방식은 기존에 학습된 정보(과거 정보)와 현재의 정보에 근거하여 Off/Sleep 상태의 서버를 On 시키거나, On 상태의 서버를 Off/Sleep시켜, 현 시점에서 필요한 최적의 서버대수를 유지하도록 했다. 15대의 서버로 클러스터를 구성하고, SPECweb을 통해 실험을 수행하였다. 실험결과, 서버 모드를 제어할 경우에 제어하지 않는 경우에 비해 약 35%의 전력이 절감되고, 본 논문에서 제안하는 학습 방법을 추가로 적용할 경우 약 5%의 전력이 추가로 절감되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.83.2-83.2
• /
• 2010

평판형 고체산화물 연료전지(planar SOFC : Solid oxide Fuelcell)는 높은 전류 효율 및 출력밀도를 가지는 중,대형 발전용 전기소자이다. SOFC 스택을 600~800도에서 작동할 경우, 금속 분리판에서 휘발된 크롬에 의한 열화현상과 금속의 산화에 의한 표면 저항의 증가가 큰 문제점으로 알려져 있으며, 이를 개선하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 금속 분리판의 열화를 억제하기 위한 여러 보호코팅의 특성을 밝히고, 특성차이의 원인을 분석하고자 하였다. 모재는 상용 STS444합금 (Nisshin steel 생산) 2.0mmt 박판을 사용하였으며, 표면 상태를 균일하게 하기 위하여 표면은 동일한 #1200 번 사포로 연마후 코팅하였다. 적용한 코팅은 전기도금 Ni 코팅, (MnCo)3O4 wet powder spray 코팅, (MnCo)3O4 ADM코팅 3종이었으며, 코팅층의 두께는 최적 공정조건에 따라 달리 하였다. 산화후 형성되는 표면 산화물의 전기적 특성을 평가하기 위하여 시험편의 비면적 저항 (ASR : area specific resistance)을 장시간 측정하였다. 측정편의 크기는 가로 4cm ${\times}$ 세로 4cm였으며, 100시간 공기중 산화후 측정하였다. 표면 접촉을 높이기 위하여 Pt paste를 40~50um도포하였으며, 1~0.1A인가된 전류에 대한 저항을 4전극법 (4-probe)으로 측정하였다. 표면 코팅층이 크롬 휘발을 억제하는 정도를 평가하기 위하여 크롬 휘발량을 측정하였다. 시편은 가로 1.5cm ${\times}$ 세로 1cm 였으며, 공급된 공기와 수분의 혼합가스와 응축기 표면에 흡착된 크롬의 양을 ICP-MASS법으로 측정하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1423-1430
• /
• 2016

The MAC protocols, which are classified into synchronous and asynchronous MAC protocol in the wireless sensor network, have actively studied. Especially, the asynchronous MAC protocol needs to research on the algorithm synchronizing between nodes, since each node independently operates in its own duty cycle. Typically, Receiver-Initiated MAC protocol is the algorithm synchronizing particular nodes by using beacon immediately transmitted by each node when it wakes up. However, the sender consumes unnecessary energy because it blankly waits until receiving the receiver's beacon, even if it does not know when the receiver's beacon is transmitted. In this paper, we propose the MAC protocol which can improve the performance by selecting an optimal node between a sender and a receiver to overcome the disadvantages. The simulation results show that the proposed algorithm improves energy efficiency and decreases average delay time than the conventional algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1183-1188
• /
• 2015

The FM-QCSK(: Frequency Modulated Quadrature Chaos Shift Keying) system is one of the most efficient systems in chaotic literature. One of the problems in this system is that half the bit duration is used for sending a chaotic reference signal which leads to increase the energy losses and reduces the data rate. In this paper, a novel scheme to enhance the performance of FM-QCSK system has been proposed. With the proposed scheme, FM-QCSK would be able to operate at higher data rates with reduced BER(: Bit Error Rate) and energy consumption. The basic modification introduced by the proposed scheme is the use one reference chaotic signal to transmit multi information signals in both in-phase and quadrature-phase channels. The results showed that the proposed scheme have achieved more than 3 dB gains in SNR for AWGN channels respectively at $BER=10^{-3}$ over the conventional one. The results also showed that the optimum number information signals can be send per reference signal is 8.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.154-159
• /
• 2006

An experimental study has been performed to investigate the correlation on compressor discharge temperature of capacity modulated system A/C in cooling mode. Indoor and outdoor temperatures, the cooling capacity, compressor discharge temperature and loading time are measured by the psychrometric calorimeter. The system is controlled by applying the scroll compressor operated by PWM valve and loading duty. With decreasing outdoor temperature, the cooling capacity increases. But, with decreasing indoor temperature, it decreases. According to the increase in outdoor temperature and loading duty, compressor discharge temperature increases. From these experimental data, the correlation on compressor discharge temperature is proposed. The correlation obtained from the present study is agreed with the experimental data within $3^{\circ}C$.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.60-67
• /
• 2004

The recent movement to deregulated and competitive electricity market reacquires new concepts against existing central dispatch in the system operation and pinning. As power systems tend to be operated more closely to their ultimate ratings, the role of SCOPF (Security Constrained Optimal Power flow) is changed and the importance for real-time security inhancement will be more increased i]1 the new and com partitive electricity market. This paper deals with the application of the SCOPF which makes possible the On-Line application. The security margin of power system truly is changed according to the conditions or configuration of power systems, therefore, the sensitivity factor reiated to the security is recalculated and the application should be updated in accordance with the state of power system. The goal of this paper is to obtain proper security through the effluent usage of the sensitivity and to apply this a1gorithm to system operation. The proposed mechanism has been tested on a sample system and the results show more secure conditions against critical contingencies.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.299-310
• /
• 2016

In this paper, we perform analysis of the performance of low-power communication technology, IEEE 802.15.4 MAC (Media Access Control) protocol used in internet of things. Wide variety of devices in internet of things generate different kinds of traffic characteristics and heterogeneous traffic environment is therefore considered in contrast to existing works. With the help of the Markov chain the performance of the protocol is derived as a function of the MAC parameters and based on the results a framework to determine energy-efficient optimal MAC parameters for applications in real time is proposed. Proposed method is shown to be more efficient in terms of energy consumption through performance comparison over application scenarios compared to operation with fixing MAC parameters, and its practicability on small devices with limited computing power is verified through evaluating the accuracy and speed of the proposed framework.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.147-154
• /
• 2013

To provide a method for optimizing the variation range of the received power is applied to Adaptive Genetic Algorithm in a LED communication environment. By optimizing the power distribution dynamically for mobile or fixed using a genetic algorithm, to eliminate the need for a system design that is customized to be independent of the movement pattern of the user's adaptability, and environmental properties. It is possible to improve easily the convenience of the user. The room power deviation from any location can be reduced by reducing the energy. the simulation results, the proposed method does not exist obstacles in an empty room with power deviation $10.5{\mu}W$ decreased 10 percent to reduce the deviation of the received power is shown that. In comparison with conventional methods, convergence to the optimal value is improved, the genetic algorithm proposed was confirmed to be efficient in terms of energy savings.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.31-41
• /
• 2011

The $LCCO_2$ evaluation programs previously developed in Korea involve limitations in establishing strategies of reducing environmental loads to optimal level in a way to put in materials directly after designing. Therefore, this study has the purpose to extract and propose elements required for the establishment of highly accurate system by counteracting swiftly in a method with high energy efficiency over cost at planning stage. To that end, existing $LCCO_2$ evaluation programs in Korea and abroad were compared and analyzed, and in the planning stage, GEM-21P and Carbon-navigator intended for the establishment of building energy performance improving strategy were selected as the evaluation program for survey. On such basis, after comparison and analysis between $LCCO_2$ calculating methods and system structures of the two programs, elements required for system establishment that can evaluate life-cycle environmental loads of building in planning stage were proposed.