• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1066-1073
• /
• 2014

This paper presents a new design method of optimal control of system which are changed the system parameters. The method used for this purpose are the Lagrange interpolation method and Pole's Moving range method. We selects a system within the scope of the changing the system parameters. Using pole's moving range we calculated the state weighting matrix of optimal control. The optimal controller is designed by Lagrange interpolation method of the state weighting matrix. We are compared with a traditional optimal controller and proposed method by simulation. The simulation showed that the proposed method is better control performance than traditional method of optimal controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1323-1328
• /
• 2011

In the current design process for the lower arm used in automobile parts, an optimal solution of its various design variables should be found through exploration of the design space approximated using the response surface model formulated with a first- or second-order polynomial equation. In this study, a multi-level computational DOE (design of experiment) was carried out to explore the design space showing nonlinear behavior, in terms of factors such as the total weight and applied stress of the lower arm, where a fractional-factorial orthogonal array based on the artificial neural network model was introduced. In addition, the tolerance robustness of the optimal solution was estimated using a tolerance optimization with six sigma constraints, taking into account the tolerances occurring in the design variables.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.102-112
• /
• 2020

In this study, in order to design a wedge-type anchor that can hold an wide carbon plate with a width of 100 mm or more that can be used in a bridge structure, the mechanical behaviors are evaluated based on the main design variables such as the angle of the wedge and the coefficient of friction between the guide and the wedge. The stress state of the carbon plate was calculated by numerical analysis method for each design variable, and the performance of the anchor in the critical state was evaluated according to the failure criteria for composite material, and the optimal design specifications of the anchor were determined based on numerical results. The performance of the optimally designed anchor was verified through actual experiments, and the results of this study are considered to be useful for the optimal design of the CFRP plate anchor to reinforce large structures.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.16-24
• /
• 1999

Design of SAW ladder filters has been performed by a rather trial and error method, that is, by modifying the design variables step by step until designed performance of the filter satisfies given specifications. In this work, optimal design method has been developed that automatically determines the detailed pattern of the SAW ladder filter to meet the specification once desired performance is given. As a first step for the development, the analysis tool for the SAW ladder filter has been produced by means of the Smith equivalent circuit analysis technique, and its validity has been verified through comparison of its calculation result with experimental data. With the analysis tool, we have investigated the performance variation of the filter with the change of its design factors, and the result has led to the optimal design algorithm. Validity and efficiency of the algorithm has been checked through test design of several SAW ladder filter samples on the market.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.185-192
• /
• 2014

Planetary gear design is complex because it involves a combination of discrete variables such as module, integer variables such as the number of teeth, and continuous variables such as face width and aspect ratio. Thus, an optimum design technique is needed. In this study, we applied a genetic algorithm to the design optimization of a planetary gear. In this algorithm, tooth root strength and surface durability are assessed with fundamental variables such as the number of teeth, module, pressure angle, and face width. With the help of this technique, gear designers could reduce trial and error in the initial design stages, thus cutting the time required for planetary gear design.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.47-50
• /
• 2005

본 연구의 목적은 차세대 대체에너지로 각광받는 풍력발전 중에서 육상발전보다 여러 가지 이점이 있는 해상에서의 한국형 풍력터빈 블레이드의 최적 형상을 위 한 알고리즘을 구현하는 것이다. 풍력터빈 블레이드에서 깃익형의 공기 역학적 특성은 매우 중요한 사항이다. 이를 위해서 익형 성능예측에 층류에서 난류로의 천이과정을 포함하는 XFOIL을 이용하여 블레이드 익형 단면의 양력과 항력 분포를 해석하였다. 첫 번째 수준의 설계변수는 운용범위내의 바람의 속도와 블레이드 지름, 축 회전수이며, 각 단면에서의 비틀림각과 시위길이는 두 번째 수준의 설계 변수이다. 운용범위 내의 각 설계점에서 익형의 공력 변수들과 최소에 너지손실 조건을 이용하여 시위길이와 피치각 분포를 최적화하였다. 각각의 설계점에서 결과를 바탕으로 풍력발전의 설계 운용범위에서 반응면을 구성하고 구배최적화 기법을 통해 요구동력의 제약함수를 만족하고 효율을 최대로 하는 블레이드 형상을 구현하였다. 최적형상에 대해 탈설계점 해석을 수행하여 그 성능을 구하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.65-71
• /
• 2022

Recently, multi-material structural topology optimization is more critical because it provides reasonable solution to weight reduction challenges and can as well provide effective conceptual design. For conventional multi-material topology optimization (MMTO), the number of design variable increases when the number of candidate materials increases, and accordingly, a significant increase in computational time occurs. Therefore, MMTO with a single design variable, such as the phase section method (PSM) was proposed. This research is focused on improving the PSM, considering three major limitations: the composition ratio does not represent the area or volume ratio, design variables are not sufficiently concentrated to target values, and certain materials are created less than they are required. To address such limitations, the redefined composition ratio and adjusted parameters for better convergence are proposed. The validation of proposed modifications is verified via two- and three-dimensional numerical examples.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.285-294
• /
• 2000

In this paper, a practical procedure for the design optimization of tubular-steel-pile-type substructure in a mooring dolphin is investigated and numerically evaluated. In the finite-dimensional optimum design formulation, geometry and cross-sectional shapes of classified group of piles are identified as design variables. The design objective is the total weight of piles, and the design constraints on stresses, penetration depth, and size limits are imposed. Several classes of practical design alternatives are sought through the linking and fixing of design variables. Among the available numerical optimization codes, both PLBA program and DNCONF subroutine in IMSL library are used. They are based on SQP algorithm and relatively easy to get. A dolphin of numerical example has 20 tubular steel piles, 4 vertical and 16 inclined. Optimum designs for different cases are successfully obtained for the practical purpose.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.380-385
• /
• 2001

The paper presents a new multidisciplinary design optimization architecture using optimal sensitivity and coordination of interdisciplinary design variables. Original design problem is decomposed into a number of sub-problems that represent individual engineering analysis. The coupled effects between sub-problems are computed by interdisciplinary design variables. System level coordination is determined by optimal parameter sensitivity calculated by finite difference method. The proposed. MDO strategy is applied to a simplified model of rotorcraft blade design associated with structures and aerodynamic disciplines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.491-499
• /
• 2007

In this paper, we present a design method of the ternary logic circuits based on Reed-Muller expansions. The design method of the presented ternary logic circuits checks the degree of each variable for the coefficients of Reed-Holler Expansions(RME) and determines the order of optimal control input variables that minimize the number of Reed-Muller Expansions modules. The order of optimal control input variables is utilized the computation of circuit cost matrix. The ternary logic circuits of the minimized tree structures to be constructed by RME modules based on Reed-Muller Expansions are realized using the computation results of its circuit cost matrix. This method is only performed under unit time in order to search for the optimal control input variables. Also, this method is able to be programmed by computer and the run time on programming is $3^n$.