• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.170-170
• /
• 2009

AIP(Air Independent Propulsion)시스템에 적용되는 연료전지 스택의 경우 연료의 이용율을 극대화시키는 것이 매우 중요하다. 일반적인 연료전지 스택은 물배출과 성능의 안정화를 위해 이론적 요구량보다 양론적으로 많은 양을 공급하여, 반응에 사용되지 않고 배출되는 연료 가스가 많아 이용율이 낮다. 여러 단으로 구성되어 전 단에서 사용하고 남은 연료 가스를 다음 단에 재공급하여 사용하는 케스케이드 구조의 연료전지 스택을 적용하게 되면 연료이용율을 90% 이상으로 높일 수 있다. 그러나 연료전지 스택에서 반응에 의해 발생한 물과 응축된 가습수가 재공급되면 연료전지 스택의 성능과 내구성에 악영향을 주는 플러딩현상이 발생하게 된다. 반면 반응수와 응축수를 제거할 때 스택에 재공급되는 연료 가스의 가습수가 같이 제거되면 낮은 가습도로 스택에 공급되는 문제점도 있다. 따라서 연료 가스의 가습도를 잘 유지하면서 액화된 물만 원활하게 제거할 수 있는 기액분리기의 개발이 필요하다. 본 연구에서는 CFD(Computational Fluid Dynamics)해석을 활용하여 다양한 디자인의 기액분리기를 설계하고 실험을 통해 각 디자인의 장단점을 분석하였다. 결과를 바탕으로 최적의 기액분리기를 개발하고 제작 및 평가를 통해 성능을 검증하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• Journal of Korea Game Society
• /
• v.9 no.3
• /
• pp.77-86
• /
• 2009

According to the research, Personal Interaction is defined that players are solving several problem to achieve goals. And if Personal Interaction is effectively done, players can get optimal experience as fun. This study analyze what kinds of extrinsic and intrinsic reward affect player's flow experience. In the result of this study, the state of flow was felt when players were aware of opportunities for personal interaction. And the personal interaction could be motivated either to achieve the high cognitive performance or by providing the equity of distribution of the objective performance in order to examine players' cognitive performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1218-1227
• /
• 2004

Multi-domain engineering systems include electrical, mechanical, hydraulic, pneumatic, and thermal components, making it difficult to design a system because of their complexity and inter domain nature. In order to obtain an optimal design, a unified design approach for each domain and an automated search method are required. This paper suggests a method for automatically synthesizing designs for multi-domain systems using the combination of bond graph that is domain independent and genetic programming that is well recognized as a powerful tool for open-ended search. To investigate the effect of proposed approach, an eigenvalue design problem is tested for some sample target sets of eigenvalues with different embryos.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.401-408
• /
• 1998

Recently there comes out various applications on real time control, audio/video conference, medical image and so on. These applications request certain Quality of Service(QoS) to their underlying communication subsystem. In these cases those communication subsystems should provide real time communication service on their QoS request as well as good performance to maintain best effort traffic. In this paper firstly we briefly look over bandwidth, traffic parameters on point to point network secondly we analyze on real time channel and propose design factors in real time channel protocol for multimedia applications.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.54-58
• /
• 2006

A new design for easily controlling operating frequency of an antenna-integrated planar oscillator is introduced. The oscillator circuit of a broadband negative-resistance active part and a passive load including a patch antenna. The patch resonance is used for determining the oscillation frequency. This design reduces the possibility of mismatch between antenna radiation and oscillation frequencies. To achieve optimum output power, load-pull simulation for the negative-resistance circuit is used. The load-pull simulation shows the feed point and the delay of feed line can affect the oscillation power. Two negative-resistance circuits capable of supporting oscillation over full C-band and X-band are fabricated. The oscillation frequency, output power and phase noise for different patch antennas are measured.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.677-682
• /
• 2006

Multi-domain design is difficult because such systems tend to be complex and include a mixtures of electrical, mechanical, hydraulic, and thermal components. To design an optimal system, unified and automated procedure with efficient search technique is required. This paper introduces design method for multi-domain system to obtain design solutions automatically, combining bond graph which is domain independent modeling tool and genetic programming which is well recognized as a powerful tool for open-ended search. The suggested design methodology has been applied for design of electric fitter, electric printer drive, and and pump system as a proof of concept for this approach.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.137-137
• /
• 2019

돌출줄눈은 산지하천의 만곡부의 빠른 유속을 감소시키기 위하여 활용된다. 본 연구에서는 친환경 디자인의 나무줄기 돌출줄눈(Tree Trunk Rip, TTR)과 사다리꼴 돌출줄눈(Trapezoid Rip, TR)의 흐름저항을 비교 분석하기 위하여 개수로 수리실험을 수행하였다. 실험은 길이 9m, 폭이 0.6m이며 경사가 0.0035로 고정된 개수로의 한쪽 측벽에 돌출줄눈을 설치하여 진행하였다. 사다리 꼴 돌출줄눈의 형상은 밑변 각이 $63^{\circ}$이며 무차원 설치간격 ${\lambda}_{nv}$가 6, 9, 12인 경우이다. 나무줄기 돌출줄눈의 기본 형상은 사다리꼴이고 표면은 나무껍질 무늬이며 ${\lambda}_{nv}$가 약 10이다. 나무줄기 돌출줄눈의 간격은 사다리꼴 돌출줄눈의 최적 설치 간격 9~12배 범위에 해당되고 평균 마찰계수는 사다리꼴 돌출줄눈의 9~12배의 평균 마찰계수 범위에 포함되었다. 사다리꼴 돌출줄눈의 ${\lambda}_{nv}$가 9, 12일 때의 전체 저항에 대한 형상저항의 비는 평균 $69.4{\pm}5.8%$였으며 나무줄기 돌출줄눈은 $70.2{\pm}2.1%$로 사다리꼴 돌출줄눈과 유사하다. 산지하천 흐름저항을 위한 돌출줄눈 설치에 있어 친환경적 디자인을 고려한 나무줄기가 사다리꼴 돌출줄눈보다 활용도가 클 것으로 기대된다.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.129-138
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions (from physical labor to mental labor). This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The high annual growth rate in the fitness and athletic apparatus market, which is more than 20%, is attributed to this phenomenon. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries, Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. This paper introduces the process and results of a design-engineering cooperative study that was peformed for the development of the ECT.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.38-48
• /
• 2021

In this study, we determine the optimal process conditions for selectively recovering Si from a solar cell surface by removal of impurities (Al, Zn, Ag, etc.). To selectively recover Si from solar cells, leaching is performed using HCl solution and an ultrasonic cleaner. After leaching, the solar cells are washed using distilled water and dried in an oven. Decompression filtration is performed on the HCl solution, and ICP-OES (Inductively Coupled Plasma Optical Emission spectroscopy) full scan analysis is performed on the filtered solution. Furthermore, XRD (X-ray powder diffraction), XRF (X-ray fluorescence), and ICP-OES are performed on the dried solar cells after crushing, and the purity and recovery rate of Si are obtained. In this experiment, the concentration of acid solution, reaction temperature, reaction time, and ultrasonic intensity are considered as variables. The results show that the optimal process conditions for the selective recovery of Si from the solar cells are as follows: the concentration of acid solution = 3 M HCl, reaction temperature = 60℃, reaction time = 120 min, and ultrasonic intensity = 150 W. Further, the Si purity and recovery rate are 99.85 and 99.24%, respectively.