• Korean Journal of Heritage: History & Science
• /
• v.45 no.4
• /
• pp.140-157
• /
• 2012

The result of a study on the useful trend of plants related to landscape and how to plant and cultivate through 'ImwonGyeongjaeji Manhakji'of Seoyugu is as follows: First, 'ImwonGyeongjaiji Manhakji', composed of total 5 volumes (General, Fruit trees, vegetables and creeper, plants, others) is a representative literature related to landscape which described the names of plants and varieties, soil condition, how to plant and cultivate, graft, how to prevent the insect attack etc systematically. Second, he recorded the tree planting as Jongjae(種栽) or Jaesik(栽植), and the period to plant the trees as Jaesusihoo(栽樹時候), transplanting as Yijae(移栽), making the fence as Jakwonri(作園籬), the names of varietieis as Myeongpoom(名品), the suitable soil as Toeui(土宜), planting and cultivation as Jongye(種藝), treatment as Euichi(醫治), protection and breeding as Hoyang(護養), garden as Jeongwon(庭園) or Wonpo(園圃), garden manager as Poja(圃者) or Wonjeong(園丁). Third, the appearance frequency of plants was analyzed in the order of flowers, fruits, trees, and creepers and it showed that the gravity of deciduous trees was 3.7 times higher than that of evergreen trees. The preference of flower and trees, fruit trees and deciduous trees and broad-leaved trees includes (1) application of the species of naturally growing trees which are harmonized with the natural environment (2) Aesthetic value which enables to enjoy the beauty of season, (3) the trend of public welfare to take the flowers and fruits, (4) the use of symbolic elements based on the value reference of Neo-Confucianism etc. Fourth, he suggested the optimal planting period as January(上時) and emphasized to transplant by adding lots of fertile soil and cover up the seeds with soil as high as they are buried in accordance with the growing direction and protect them with a support. That is, considering the fact that he described the optimal planting period as January by lunar calendar, this suggests the hints in judging the planting period today. For planting the seeds, he recommended the depth with 1 chi(寸 : approx. 3.3cm), and for planting a cutting, he recommended to plant the finger-thick branch with depth 5 chi(approx. 16.5cm) between January and February. In case of graft of fruit trees, he described that if used the branch stretched to the south, you would get a lot of fruit and if cut the branches in January, the fruits would be appetizing and bigger. Fifth, the hedge(fence tree) is made by seeding the Jujube tree(Zizyphus jujuba var. inermis) in autumn densely and transplanting the jujube tree with 1 ja(尺 : approx. 30cm) interval in a row in next autumn and then binding them with the height of 7 ja(approx. 210cm) in the spring of next year. If planted by mixing a Elm tree(Ulmus davidiana var. japonica) and a Willow(Salix koreensis), the hedge whose branch and leaves are unique and beautiful like a grating can be made. For the hedge(fence tree), he recommended Trifoliolate orange(Poncitus trifoliata), Rose of sharon(Hibiscus syriacus), Willow(Salix koreensis), Spindle tree(Euonymus japonica), Cherry tree(Prunus tomentosa), Acanthopanax tree(Acanthopanax sessiliflorus), Japanese apricot tree(Prunus mume), Chinese wolf berry(Lycium chinense), Cornelian tree(Cornus officinalis), Gardenia(Gardenia jasminoides for. Grandiflora), Mulberry(Morus alba), Wild rosebush(Rosa multiflora) etc.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.149-155
• /
• 2012

Purpose: Long Extension (LE) is used in proton therapy for lung and abdomen. However, it has limitations in surface area, produces collision in posterior oblique beam which creates limitations in various gantry angles in planning therapy and increases air gap (distance between patient and compensator). Therefore, this study investigates the usability of manufactured Rounded Extension (RE) in comparison to LE to use the most suitable extension in proton therapy. Materials and Methods: To compare structural features of LE and RE. This study investigated usable gantry angle for snout sizes 100, 180 and 250 and CT scanned Humanoid phantom. And it compared the air gap in posterior oblique direction. Results: The structural features of two extensions are as follow. Because of the existence of supporting bar, the width of LE was 40 cm and RE was 50 cm. Result of the investigation of usable gantry angle for snout sizes 100, 180 and 250 are as follow. LE is ${\pm}36$ (average) at 180 degree and RE is ${\pm}70$ (average). And also, the air gap of RE is decreased by 11.3 cm in average at the same gantry angle. Conclusion: Manufactured RE for proton therapy has several benefits than LE. Its therapy surface area is wider and range of usable gantry angle is also wider. Also, the air gap at the posterior oblique beam has decreased. Therefore the usability of RE in proton therapy of lung and abdomen will be increased compared to LE. However, the air gap of proton therapy at the lateral direction may be increased, so there may be need for make up to decrease air gap at the lateral direction in the future.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.123-130
• /
• 1991

A docking intraoperative electron beam applicator system, which is easily docking in the collimator for a linear accelerator after setting a sterilized transparent cone on the tumor bearing area in the operation room, has been designed to optimize dose distribution and to improve the efficiency of radiation treatment method with linear accelerator. This applicator system consisted of collimator holder with shielded metals and docking cone with transparent acrylic cylinder, A number of technical innovations have been used in the design of this system, this dooking cone gives a improving latral dose coverage at therapeutic volume. The position of $90\%$ isodose curve under suface of 8 cm diameter cone was extended $4\sim7$ mm at 12 MeV electron and the isodose measurements beneath the cone wall showed hot spots as great as $106\%$ for acrylic cone. The leakage radiation dose to tissues outside the cone wall was reduced as $3\sim5\%$ of output dose. A comprehensive set of dosimetric characteristics of the intraoperative radiation therapy applicator system is presented.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.21-29
• /
• 2014

A new cold neutron triple-axis spectrometer (Cold-TAS) was recently constructed at the 30 MWth research reactor, HANARO. The spectrometer, which is composed of neutron optical components and radiation shield, required a redesign of the segmented monochromator shield due to the lack of adequate support of its weight. To shed some weight, lowering the height of the segmented shield was suggested while adding more radiation shield to the top cover of the monochromator chamber. To investigate the radiological effect of such change, we performed MCNPX simulations of a few different configurations of the Cold-TAS monochromator shield and obtained neutron and photon intensities at 5 reference points just outside the shield. Reducing the 35% of the height of the segmented shield and locating lead 10 cm from the bottom of the top cover made of polyethylene was shown to perform just as well as the original configuration as radiation shield excepting gamma flux at two points. Using gamma map by MCNPX, it was checked that is distribution of gamma. Increased flux had direction to the top and it had longer distance from top of segmented shield. However, because of reducing the 35% of the height, height of dissipated gamma was lower than original geometry. Reducing the 35% of the height of the segmented shield and locating lead 10cm from the bottom of the top cover was selected. After changing geometry, radiation dose was measured by TLD for confirming tester's safety at any condition. Neutron(0.21 ${\mu}Svhr^{-1}$) and gamma(3.69 ${\mu}Svhr^{-1}$) radiation dose were satisfied standard(6.25 ${\mu}Svhr^{-1}$).

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.242-255
• /
• 2006

In the recent years, Popularization of mobile devices such as Smart Phones, PDAs and MP3 Players causes rapid increasing necessity of Power management technology because it is most essential factor of mobile devices. On the other hand, despite low price, hard disk has large capacity and high speed. Even it can be made small enough today, too. So it appropriates mobile devices. but it consumes too much power to embed In mobile devices. Due to these motivations, in this paper we had suggested methods of minimizing Power consumption while playing multimedia data in the disk media for real-time and we evaluated what we had suggested. Strict limitation of power consumption of mobile devices has a big impact on designing both hardware and software. One difference between real-time multimedia streaming data and legacy text based data is requirement about continuity of data supply. This fact is why disk drive must persist in active state for the entire playback duration, from power management point of view; it nay be a great burden. A legacy power management function of mobile disk drive affects quality of multimedia playback negatively because of excessive I/O requests when the disk is in standby state. Therefore, in this paper, we analyze power consumption profile of disk drive in detail, and we develop the algorithm which can play multimedia data effectively using less power. This algorithm calculates number of data block to be read and time duration of active/standby state. From this, the algorithm suggested in this paper does optimal scheduling that is ensuring continual playback of data blocks stored in mobile disk drive. And we implement our algorithms in publicly available MPEG player software. This MPEG player software saves up to 60% of power consumption as compared with full-time active stated disk drive, and 38% of power consumption by comparison with disk drive controlled by native power management method.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.600-619
• /
• 2006

According to recent technical advances on sensors and mobile devices, processing of data streams generated by the devices is becoming an important research issue. The data stream of real values obtained at continuous time points is called streaming time-series. Due to the unique features of streaming time-series that are different from those of traditional time-series, similarity matching problem on the streaming time-series should be solved in a new way. In this paper, we propose an efficient algorithm for streaming time- series matching problem that supports normalization transform. While the existing algorithms compare streaming time-series without any transform, the algorithm proposed in the paper compares them after they are normalization-transformed. The normalization transform is useful for finding time-series that have similar fluctuation trends even though they consist of distant element values. The major contributions of this paper are as follows. (1) By using a theorem presented in the context of subsequence matching that supports normalization transform[4], we propose a simple algorithm for solving the problem. (2) For improving search performance, we extend the simple algorithm to use $k\;({\geq}\;1)$ indexes. (3) For a given k, for achieving optimal search performance of the extended algorithm, we present an approximation method for choosing k window sizes to construct k indexes. (4) Based on the notion of continuity[8] on streaming time-series, we further extend our algorithm so that it can simultaneously obtain the search results for $m\;({\geq}\;1)$ time points from present $t_0$ to a time point $(t_0+m-1)$ in the near future by retrieving the index only once. (5) Through a series of experiments, we compare search performances of the algorithms proposed in this paper, and show their performance trends according to k and m values. To the best of our knowledge, since there has been no algorithm that solves the same problem presented in this paper, we compare search performances of our algorithms with the sequential scan algorithm. The experiment result showed that our algorithms outperformed the sequential scan algorithm by up to 13.2 times. The performances of our algorithms should be more improved, as k is increased.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.429-438
• /
• 2022

This study evaluated the effect of the degree of weathering on the particle size distribution and the amount of fine particles generated in the aggregate production process during the crushing of igneous rock. Rock samples were collected from three areas with differences in strength from the Schmith hammer measurement at the aggregate quarry in Geochang, Gyeongsangbuk-do. After crushing with a jaw crusher under the same conditions in laboratory, particle size analysis, mineral analysis, chemical analysis, and weathering index were calculated. The Schmidt hammer measurements were 56, 28, and <10, and the CIA and CIW values of weathering index were also different, so the rock samples were classified into hard rock, soft rock, and weathered rock according to the weathering degree. It shows a smaller particle size distribution toward weathered rocks under the microscope, and the proportion of altered clay minerals such as sericite increased. The composition of feldspar and quartz was high for hard rock, and the ratio of muscovite and kaolinite was low. As a result of the crushing of the jaw crusher, hard rock produced a lot of coarse crushed material (13.2mm), while soft rock and weathered rock produced fine crushed material (4.75mm). The former showed the characteristics of the beta distribution curve, and the latter showed the bimodal distribution curve. The production of fine rock particles (based on 0.71mm of sieve, wt. %) increased to 13%<21%<22% in hard rock, soft rock, and weathered rock, and the greater the degree of weathering, the more fine rock particles were generated. The fine particles are recovered by the operation of the sand unit in the wet aggregate production process. Therefore, in order to minimize the amount of sludge generated in the aggregate production process, it was judged that a study on the optimal operation of cyclones could be necessary.

• Sim-seong Yeon-gu
• /
• v.38 no.1
• /
• pp.1-44
• /
• 2023

Hexagram Bi (比 ䷇ 8) is one of the hexagrams comprised of one-unbroken line and five-broken lines. The hexagrams of one-unbroken and five-broken lines symbolize the relationship and dynamics between one yang-consciousness and the five-yin unconsciousness. The hexagram of one-unbroken line and five-broken lines has six different images depending on the position of the one unbroken line from the beginning line to the top line. In terms of psychology, this means that the position change of one yang line in relation to five yin lines may symbolize the function of consciousness which clarifies and determines the content of the psyche. In addition, the flow of psychic energy can be examined through the process of one unbroken line's movement. In other words, the psychic contents of the beginning line of hexagram Bok (復 ䷗ 24), which is the beginning of the hexagram of one-unbroken line and five-broken lines, proceed sequentially, and then arrive at the process of the last sixth, hexagram Bak (剝 ䷖ 23) through the fifth, the hexagram Bi (8). That is, it can be said that the content of the hexagram and the line determined according to the position of one unbroken line show a certain psychic flow. As a result, the first hexagram Bok (復 ䷗ 24), after recovering and starting newly, means the beginning of consciousness. After that the process of proceeding with the second, third, and fourth lines represents the flow of consciousness. And in the fifth place, the fifth line of hexagram Bi, it reaches its peak and is placed in the optimal state of consciousness because of its right and centered position at this hexagram Bi. Like nature, the psyche gradually enters the path of decline from the highest state, which leads to the last sixth, the top line of hexagram Bak. However, the top line of the hexagram Bak, where everything falls off, contains the content of starting again in its top line. It is the beginning line of hexagram Bok to inherit this. This means the circumambulation of the psyche that changes from a psychologically difficult state of depression to a stage of recovery. There is a stage that must be passed in this circulation process, and that is the hexagram Gon (坤 ䷁ 2). October(tenth month)'s hexagram Gon is placed between hexagram Bak, the ninth month of the lunar calendar, and hexagram Bok, the eleventh month of the lunar calendar. This represents that the flow of recovery must go through a maternal process of hexagram Gon. The retreat to the psychological uterus is inevitable in regenerating the psyche. This process flows from the hexagram Bak and through hexagram Gon to the hexagram Bok. At this situation the hexagram Gon acts the absolutely necessary role. In addition, the main body of the hexagrams of one-unbroken and five-broken lines, including the Bi hexagram, is also the Gon hexagram composed of six-broken lines. In other words, all six hexagrams of one-unbroken and five-broken lines have a certain relationship with the Gon hexagram, and it would be meaningful to look at the correlation between the unbroken lines of the hexagrams of one-unbroken and five-broken lines and the corresponding broken lines of the hexagram Gon. This can be said to be the dynamics of the maternal unconscious connected to the state of consciousness in six forms. Therefore, each hexagram of one-unbroken and five-broken lines symbolizes the expression of the integration the mother archetype with the consciousness. Revealing this well is the meaning of the hexagram of one-unbroken and five-broken lines. Its hexagram image consists of a combination of Gon (☷), which symbolizes the mother, and the thunder (☳) the eldest son, the water (☵) the middle son and the mountain (☶) the third son. As a result, the hexagram Bok (復 ䷗ 24), Sa (師 ䷆ 7), Gyeom (謙 ䷠ 15), Ye (豫 ䷏ 16), Bi (比 ䷇ 8) and Bak (剝 ䷖ 23) are sequentially created in the order of the unbroken line. This is symbolically the evolutionary process of consciousness. In this way, the hexagrams of one-unbroken and five-broken lines, which mean the conjunction of mother and son, represent the advancing relationship between the maternal unconscious and consciousness. In addition, the relationship with the mother according to the position of the son is related to the dynamics of mother archetype to the attitude of consciousness. The psychological meaning can be deduced from the flow of six lines of hexagrams of one-unbroken and five-broken lines. And the state in which the activation of the consciousness is at its peak is the fifth line of the hexagram Bi, and comparing it with the contents of the corresponding fifth line of hexagram Gon not only can find the state and meaning of the conjunction of consciousness and the maternal unconscious, but the entire flow can be compared to the individuation process.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.