• JOURNAL OF ELECTRICAL WORLD
• /
• s.281
• /
• pp.53-57
• /
• 2000

유도전동기는 설계기술, 해석기술, 재료(코어, 마그넷 와이어, 절연재료 등) 제조기술 등의 개발로 그 특성의 향상, 소형$\cdot$경량화, 저소음$\cdot$저진동, 코스트다운 등을 도모하여 왔다. 그러나 최근에 지구환경 보호와 에너지자원의 고갈 등으로 인한 위기감에서 에너지절약과 고효율화의 움직임이 가속되고 있어, 유도전동기에 대해서도 보다 고효율화에 대한 요구가 높아지고 있다. 미국이나 캐나다에서는 규격과 법률에 의한 유도전동기에 대해서도 보다 고효율화에 대한 요구가 높아지고 있다. 미국이나 캐나다에서는 규격과 법류엥 의한 유도전동기의 효율 규제가 개시되고 있으며 유럽, 일본에서도 이에 따라가고 있는 경향이다. 이와 같은 요구에 응하기 위하여 신시리즈의 고기능$\cdot$에너지절약 모터 ''수퍼라인 에코시리즈''를 개발하였다. 수퍼라인 에코시리즈는 권선 및 슬롯의 설계최적화, 고자속 밀도 및 저철손 철심재의 개발, 슬롯 조합의 최적화 등에 의하여 동손$\cdot$철손$\cdot$표류손 등의 손실을 저감시킴과 동시에 고성능 바니시의 개발, 베어링 그리스 및 베어링 하우징 재료의 개량 등으로 다음과 같은 특징을 갖고 있다. (1) 업계 최고급 고효율 일본 JEMA 기준치와 미국 EPAct 기준치를 만족하는 업계 최고급 고효율$\cdot$에너지절약 모터 (2) 인버터 구동에 최적의 특성 및 성능 (3) 내환경성의 강화, 장수명화 습도 100$\%$ RH, 베어링의 장기 Maintenance Free화 (4) 저진동 및 저소음

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.152-161
• /
• 2008

We investigate that when we restrict the encoding modes on the enhancement layer based on that of the base layer exploiting the high correlation between the best modes at base and enhancement layers, we should determine the set of surviving search modes to yield the minimum excessive RD-cost caused by the restriction. Based on these sets, we implement a fast mode decision algorithm for H.264 Scalable Extension (SE). Simulation results show that the proposed algorithm is superior in the sense of the RD-performance to the conventional mode restriction method which is based on the conditional probabilities of the best modes.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.11-21
• /
• 2012

As a strategy to enhance traffic management, roundabouts come to the fore recently to decrease traffic accidents, streamline traffic flows, and expedite the realization of green transportation. As local governments introduced roundabouts, new road sign standards have to be established because the existing road sign regulations cannot be applied to roundabouts. Prior to trying to make suitable specification of sub-destination signs in roundabouts, regulations of other countries were examined and modified. The legend and location was calculated so that drivers could turn in time. Two specifications were determined by simulation experiments. As a result, drivers could read signs at right side better than at traffic island, and turn in time at 15cm legend size. Consequently, we proposed the minimum specifications and optimal locations of sub-destination signs.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.599-609
• /
• 2012

The objective of this research is to reuse and recycle the oyster shell wastes as a useful of antioxidant beads for foodstuff preservation through the treatment of oyster shell and seaweed pulp. This research is divided into two parts. In the first, designing and preparation of pilot scale condition was accomplished. The second part dealt with establishing the optimized manufacturing condition for [A],[B],[C-a],[C-b] compounds, and analyzing these products. The pilot scale preparation was composed of modify synthesized seaweed pulp / Cl-starch and it's various bead form were prepared with various weight ratios using polar protic solvents. In addition, with increased seaweed pulp content in the blends, antibacterial property values of seaweed pulp/Ag-oyster shell blend was decreased, however, the antioxidant and bead's solidity properties increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.748-756
• /
• 2015

In this paper, we developed a miniaturized real time video compression system satisfying the military environment using ADV212 and FPGA. We present an efficient hardware design scheme for the weight reduction of the device and also a software solution to deal with noisy image signals. Experimental results show that the frame delay is reduced by a factor of 2 or 3 and the device's weight is decreased by a factor of 6 to 7. In order to prove the reliability for the military usage of this development, we examine the environmental test (MIL-STD-810G) and EMI test (MIL-STD-461F). Experimental results show that the developed system satisfies the requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2891-2898
• /
• 2013

CCSDS Standard is widely used in international space telecommunication area. In this standard, Encryption is realized using a unique hierarchical encryption protocol and satisfied security requirements of communication channels. For synchronization, encryption sync is attached in the beginning of encrypted data. But exceptional case(timing jittering, abnormal system shutdown, etc.) is occurred, receiving equipment cannot decrypt received data. In this paper, we propose a SES Alarmed link encryption synchronization method for sending warning signal to the transmitter when some problems have been occurred during the transmission and we also suggest optimum conditions for SES Alarm signal through performance analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.568-583
• /
• 2015

In this paper, the conceptual design procedure and results of Earth observation satellite through Multidisciplinary Design Optimization (MDO) are described. The conceptual design equations for major parameters are developed based on the established database of Earth observation satellite so far. The MDO conceptual design tool for Earth observation satellite was developed by applying the Collaborative Optimization (CO) architecture amongst several MDO architecture techniques available today. The objective for this research was set to minimize the total mass of satellite as well as satisfy all design constraints by utilizing the Sequential Quadratic Programming (SQP) algorithm. Eventually the effectiveness of MDO conceptual design tool was verified through proposing a comparison between the conceptual design results with MDO applied and the design specification of ASNARO-1 & IKONOS-2 Earth observation satellite.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.733-739
• /
• 2004

Model for optimally dimensioned PE film bag was developed according to fruit size to maintain best quality of 'Fuyu' persimmon in modified atmosphere packaging (MAP) storage based on relationship between quality and oxygen and carbon dioxide in PE film bag. Harvested persimmons were graded into five sizes, and average weights were LL:261, L:217, M:188, S:168, and SS:154 g. Five fruit units of each grade were optimized in five PE film bag sizes of $150{\times}376,\;140{\times}357,\;130{\times}344,\;130{\times}333,\;and\;120{\times}3l8\;mm$. To minimize quality deterioration such as softening and discoloration, optimal oxygen and carbon dioxide concentrations in PE film bag were 0.5-1.0 and 6.0-8.0%, respectively, and optimal thickness of PE film bag according to fruit size were LL:45, L:50, M:55, S:60, and $SS:65\;{\mu}m$. For all fruit sizes, model for PE film bag area $(mm^2)$ was good quadratic simple equation by fruit weight (g): $Y=-4055.707+627.993X_1-0.701{X_1}^2$. Model far optimal oxygen and carbon dioxide (Y) concentration in PE film bag was suited to linear multiple equation by fruit weight $(X_1,\;g)$ and PE film thickness $(X_2,\;{\mu}m)$. Equations for oxygen and carbon dioxide concentrations (%) were $Y=5.798-0.0109X_l-0.0491X_2\;and\;Y=-2.427+0.01927X_l +0.09646X_2$, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1397-1405
• /
• 2013

The optimal rib pattern design of B-pillar trim considering occupant head protection can be determined by two methods. One is the conventional approximate optimization method that uses the statistical design of experiments (DOE) and response surface method (RSM). Generally, approximated optimum results are obtained through the iterative process by trial-and-error. The quality of results strongly depends on the factors and levels assigned by a designer. The other is a methodology derived from previous work by the authors, called the sequential design of experiments (SDOE), to reduce the trial-and-error procedure and to find an appropriate condition for using artificial neural network (ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.185-190
• /
• 1999

In order to develop the techniques for isolation and production of barley starch from Youngsan variety, optimum conditions of isolation processes of barley starch was investigated. The effect of steeping temperature and time in wet-milling process was examined and the results showed that optimal steeping temperature and time were 30$^{\circ}C$ and 12 hr. The barley starch isolated under these conditions contained 5.7% crude protein, 69% starch content and 83% white value by 100 mesh process. The optimum condition of alkali treatment was showed that concentration of NaOH and treating time were 0.2% and 6 hr, respectively. To remove the fat content of barley starch, after alkali process obtained barley starch with the addition of 10% (v/v) EtOH was attempted. As the result, the barley starch contained 0.1% of crude fat. Under the optimized isolation conditions, the barley starch finally contained 0.1% protein and 95% starch content. The isolated barley starch were superior to commercial corn starch in purity and white value.